Hello Jose,
I have Acuson 128 with image problems, and it's complicated start to fix it without a service manual.
I'll be very grateful if you can send it to me to adriangusberti@gmail.com.
Thanks a lot,
Adrian.
morning
l have changed these boards( CSC,FEB, FEC) and now it does not display any error again. But the machine display the following message when the transduscer is connected:
software sono-pac for transduscer has not been licenced please remove transduscer.
First thing to do is to replace the two little batteries for memory backup. The error you are getting may be due to corrupted string codes. Probably ther is no need to replace the boards. Try putting them back in the machine, put fresh batteries and key in the codes. This might be the solution. If errors persist, then replace boards.
Looking for the leader in urology? BK Medical is and we are the 3rd party experts. We sell BK and many other brands. Call today to discuss your urology equipment needs and save $1,000’s! Call Today: 1-888-838-7488 Email: sales@sentinelimaging.net
Tchokothe Guy
Problem with an Acuson XP128/10c
July 17, 2009 08:43
morning
the machine display after plug it :POWER UP ERROR
CSC 28
FEB 28
FEC 80
please help me
to rate and post a comment
Jose Vallejos
Re: Problem with an Acuson XP128/10c
July 18, 2009 08:23
I have a service manual for this machine.
Contact me javv2005@hotmail.com
to rate and post a comment
Adrian Gusberti
Re: Problem with an Acuson XP128/10c
August 10, 2009 05:30
Hello Jose,
I have Acuson 128 with image problems, and it's complicated start to fix it without a service manual.
I'll be very grateful if you can send it to me to adriangusberti@gmail.com.
Thanks a lot,
Adrian.
to rate and post a comment
Tchokothe Guy
Re: Problem with an Acuson XP128/10c
July 20, 2009 07:13
morning
l have changed these boards( CSC,FEB, FEC) and now it does not display any error again. But the machine display the following message when the transduscer is connected:
software sono-pac for transduscer has not been licenced please remove transduscer.
to rate and post a comment
Tchokothe Guy
Re: Problem with an Acuson XP128/10c
July 20, 2009 01:12
l have enter the encryption data.now the machine is ok but the DUAL touch is not working
how can l do?
to rate and post a comment
Vladimir Del Rosario
Re: Problem with an Acuson XP128/10c
July 22, 2009 04:27
First thing to do is to replace the two little batteries for memory backup. The error you are getting may be due to corrupted string codes. Probably ther is no need to replace the boards. Try putting them back in the machine, put fresh batteries and key in the codes. This might be the solution. If errors persist, then replace boards.
to rate and post a comment
Tchokothe Guy
Re: Problem with an Acuson XP128/10c
July 28, 2009 09:37
tank you i replace the two lilltes batterie.now my problem is result
to rate and post a comment