MIT labs, experts in Multi-Vendor component level repair of: MRI Coils, RF amplifiers, Gradient Amplifiers Contrast Media Injectors. System repairs, sub-assembly repairs, component level repairs, refurbish/calibrate. info@mitlabsusa.com/+1 (305) 470-8013
Yojin Ramones
Problem with GE Logic 9
April 13, 2009 04:58
Hi I have a logic 9 GE, when turn on the unit, start funtion to check it off the system and re- start again, some time did that.
When is on it work well and again the system put off and restart again.
Some body give me a sugestion
regards
yojin
to rate and post a comment
Eduardo Tognon
Re: Problem with GE Logic 9
April 13, 2009 11:50
Reinstal the sofware...
Eduardo
eduardo@elomed.com.br
to rate and post a comment
John Carrubba
Re: Problem with GE Logic 9
April 14, 2009 01:06
Sounds like it maybe the back end processor(BEP).The power supply tends to go bad on those.
to rate and post a comment
Yojin Ramones
Re: Problem with GE Logic 9
April 21, 2009 09:12
Thanks for your support to all people
yes the CPU2 was damage I pull out and wit 1 cpu work well
thanks again
regards
yojin
to rate and post a comment
MIGUEL ANGEL TORRES MARTINEZ
re:Re: Problem with GE Logic 9
May 18, 2016 12:26
Hello friend
I need the bios password, please
What is your whatsapp?
to rate and post a comment
MIGUEL ANGEL TORRES MARTINEZ
re:Re: Problem with GE Logic 9
May 18, 2016 12:26
Hello friend
I need the bios password, please
What is your whatsapp?
to rate and post a comment
Gary Fink
Re: Problem with GE Logic 9
April 14, 2009 09:25
Ensure you have the proper voltage coming into the power supply for the computer. Then make sure you have the proper voltages coming out of the supply to the motherboard and the hard drives. Make sure the hard drive cable has a good solid connection. Let us know what you find. Good luck!
to rate and post a comment
Yojin Ramones
Re: Problem with GE Logic 9
April 17, 2009 01:35
Hi freinds
the situation is
I reinstall the software in other disk it was install but fail, restart continuos.
check all voltage of power suplay conector and power suply ups CPU and it is ok.
but continuos off and restart.
Now whe try shootdown the machine by software it not finish. only restart again the unit.
could some body tell me the password off the bios system?
regards yopur help is wonderfull thanks
to rate and post a comment