you are getting the M050 because of the 400
M 400 IRIS X-ray disabled, Iris positioning error
Switch system off/on Call service if problem is persistent Iris positioning error on the collimator. X-ray is disabled. Check collimator functionality and cables. Perform Iris adjustment calibrations.
System in
itialisation problem Switch system off/on. Call service if problem is persistent
A system startup problem occurred. Switch the system off and on. If the problem persists, check if the Mobile Viewing Station and the Stand are correctly connected. Check the Stand-Mobile Viewing Station cable.
400
X-ray disabled, iris positioning error. Call service
if problem is persistent
Iris positioning error on the collimator. X-ray is disabled. Check collimator functionality and cables. Perform Iris adjustment calibrations
dear sir if you need complete service manuals contact me,
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Abdelmuin Khatib
pulsera c-arm
February 11, 2016 04:25
Hello
I have c-arm model pulsera when I start it give me error #M 050 and M 400
I need help to solve problem
Regards
to rate and post a comment
Lenny Place
re: pulsera c-arm
February 11, 2016 05:54
you are getting the M050 because of the 400
M 400 IRIS X-ray disabled, Iris positioning error
Switch system off/on Call service if problem is persistent Iris positioning error on the collimator. X-ray is disabled. Check collimator functionality and cables. Perform Iris adjustment calibrations.
to rate and post a comment
DMEDS
re: pulsera c-arm
February 12, 2016 09:01
050
System in
itialisation problem Switch system off/on. Call service if problem is persistent
A system startup problem occurred. Switch the system off and on. If the problem persists, check if the Mobile Viewing Station and the Stand are correctly connected. Check the Stand-Mobile Viewing Station cable.
400
X-ray disabled, iris positioning error. Call service
if problem is persistent
Iris positioning error on the collimator. X-ray is disabled. Check collimator functionality and cables. Perform Iris adjustment calibrations
dear sir if you need complete service manuals contact me,
magmesme@gmail.com
Reagrds
to rate and post a comment