I've got this QXi that wont start up applications. It has problems with the SBC, I tried to rsh sbc and ping sbc, with no connection, it says host is down. There is a warning message(orange) in the screen that says:
CT Software Auto-Start Disabled
CT Applications do not autostart after system configuration changes: ie: the SBC must be loaded after an install -or- and SBC reconfig may be necessary after an OC reconfig.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
FranciscoG
QXi CT LightSpeed
August 24, 2016 07:52
Hi guys,
I've got this QXi that wont start up applications. It has problems with the SBC, I tried to rsh sbc and ping sbc, with no connection, it says host is down. There is a warning message(orange) in the screen that says:
CT Software Auto-Start Disabled
CT Applications do not autostart after system configuration changes: ie: the SBC must be loaded after an install -or- and SBC reconfig may be necessary after an OC reconfig.
It says that the SBC is not running.
Any help is appreciated.
to rate and post a comment
FranciscoG
re: QXi CT LightSpeed
August 24, 2016 05:07
I tried to LFC software in the whole system, changed the Hard disk drive from the SBC and couldn't do anything.
When I type:
ifconfig ec0
ifconfig: ioctl (SIOCGIFFLAGS): no such interface
ct01 #
So I'm suspecting that I have a bad interface board, when I do ping to SBC, the system tells me that the Host is down.
If someone has any other idea, please let me know.
to rate and post a comment
Abu-Yusuf
re: QXi CT LightSpeed
August 25, 2016 01:18
Did you check log files? take a picture and send them to me. techsupport@wcm.tj
to rate and post a comment
Manuel Esquer
re: re: QXi CT LightSpeed
June 12, 2017 10:19
Hi
Im looking for GE HiSpeed QXi Software
Application 103L.5_HSQXIM4
OS LINUX
If you have it, please let me know
Thank you
to rate and post a comment
Anganya
re: QXi CT LightSpeed
August 25, 2016 04:36
No help from please. Sorry
to rate and post a comment
MICHAEL TIBAGANJANA
re: QXi CT LightSpeed
August 25, 2016 04:36
I"m also in need of software for GE Logiq9 ultrasound machine. If you contact me please
to rate and post a comment