Hi guys, I've got this issue with a Qxi CT, there is no connection to the SBC, there is a message on the screen that says:
SBC not responding. Attempt to reboot SB. Please wait
Then...
SBC must be booting up. Please wait
and stays in that loop trying to boot the SBC with no success.
Brand new OEM Philips & Siemens Parts at unbeatable prices shipping domestically and Includes warranty!
Email P/N for pricing: sales@Relaxationinc.com
(P) 813-925-1314, www.relaxationinc.com
FranciscoG
Qxi SBC not responding
December 02, 2016 09:12
Hi guys, I've got this issue with a Qxi CT, there is no connection to the SBC, there is a message on the screen that says:
SBC not responding. Attempt to reboot SB. Please wait
Then...
SBC must be booting up. Please wait
and stays in that loop trying to boot the SBC with no success.
Any help is appreciatted, thanks.
to rate and post a comment
FranciscoG
re: Qxi SBC not responding
January 05, 2017 10:00
I ended up changing the SBC computer, but I can not perform the following command to install software on the SBC.
/usr/bin/autoSBC
After I press ENTER... the following error appears:
Connecting to the SBC...
ERROR: Unknown State of the SBC, The program will terminate. Attempt to power-cycle to SBC and run the autoSBC script again.
So I did the power-cycle by pressing the button on the left side of the RED/GREEN leds, with no result.
I can ping and rsh the SBC with no problem, just can't autoSBC.
to rate and post a comment