Hello everyone!
I got a problem with my Radiometer ABL800. The Hemolyzer test in Service menu shows these results:
1. Thermostat temperature: Passed; 37.2 degrees
2. Thermostat heat: Passed 12.5%
3. Tuning voltage: Failed 67.0 Vpeak
4. Tuning Frequency: Passed 30.284khz
5. Impedance shape: Passed
6. Cavitation absorbance: Failed Max 4mAbs
7. Cavitation Drive Current Failed 100%
I believe that "pass" tests are mainly related to the logicboard/controller and the "fail" tests are related to the mechanics of the hemolyzer.
Hello,I do have a service manual for this system but it does not contain any info about the hemolyzer. Maybe Radiometer keeps this kind of info only for themselves :-) Unfortunately I cannot understand your question . Are you refering to the calibration gas? Have a nice day
Therapeutic Technologies closeout auctions take place on DOTmed.com. Bid today on 538 lots of medical equipment. Inspections may be done by appointment. Hours are Monday through Friday 9am-4pm Contact chrisnuytens1@gmail.com to schedule.
Ciprian Lupu
Radiometer ABL 800 hemolyzer failure
November 14, 2014 08:31
Hello everyone!
I got a problem with my Radiometer ABL800. The Hemolyzer test in Service menu shows these results:
1. Thermostat temperature: Passed; 37.2 degrees
2. Thermostat heat: Passed 12.5%
3. Tuning voltage: Failed 67.0 Vpeak
4. Tuning Frequency: Passed 30.284khz
5. Impedance shape: Passed
6. Cavitation absorbance: Failed Max 4mAbs
7. Cavitation Drive Current Failed 100%
I believe that "pass" tests are mainly related to the logicboard/controller and the "fail" tests are related to the mechanics of the hemolyzer.
What do you think? Is it possible to fix it?
Thank you :)
to rate and post a comment
Dmitry Dederer
re: Radiometer ABL 800 hemolyzer failure
November 16, 2014 11:19
Hello! Do you have service manuals for this system? You need to check caviation. What kind of gas do you use?
to rate and post a comment
Ciprian Lupu
re: re: Radiometer ABL 800 hemolyzer failure
November 20, 2014 06:30
Hello,I do have a service manual for this system but it does not contain any info about the hemolyzer. Maybe Radiometer keeps this kind of info only for themselves :-) Unfortunately I cannot understand your question . Are you refering to the calibration gas? Have a nice day
to rate and post a comment
Lenny Place
re: re: Radiometer ABL 800 hemolyzer failure
July 22, 2015 11:33
Dmitry
do you have the service manual for this unit? i am trying to help someone and the manual would be helpful
thank you
to rate and post a comment