Dear Sir,
We have a SCHILLER AT-1 which cannot print waveform in auto start mode ,but good in manual start mode.Would you like to give us suggestion or service manual kindly?
We should be grateful if we can receive your reply!
Best regard,
htdocument@126.com
Is internal built-in printer or external printer having problem on automatic mode? Was it ever working before? Depending on the software, some of the features are not available on the built-in printer. Date and time are not printed out on the internal printer. I suggest you consult with the operator's manual instead.
These equipments are integrated. That mean that there few components you can change in order to solve something.
You don't mention if when youpush AUTO you have an iso electrical line or if the printer never start. If you have an iso electrical line in AUTO but perfect EKG in MANUAL, the main board must be changed. If the print doesn't start in AUTO the soft touch pannel or its controller board must be deffective.
Hi,
I have solved one like that. Just a simple thing, re-check the printing paper whether it is in right spot mark dicrection or not? You can not start in auto mode because machine can not detected the paper (mark pooint) so there is no command for that. It's not like a software probelm anyways :-)
Hope it helps! Let me know the result after work.
duyquyg@gmail.com.
It look like a good idea. Perhaps is the key to solve it. I don't remember is this equipment use marked paper for work or not but your comment is real and possibly the solution.
I have not the problem here. I was triyng to help Yi Huang (see top) to solve the problem.
Specializing in GE, we keep your ICU monitors calibrated and patient-ready—fast, reliable service from expert biomed techs. Southeastern Biomedical: 888-310-7322.
yi huang
SCHILLER AT-1 cannot print waveform
July 05, 2006 11:43
Dear Sir,
We have a SCHILLER AT-1 which cannot print waveform in auto start mode ,but good in manual start mode.Would you like to give us suggestion or service manual kindly?
We should be grateful if we can receive your reply!
Best regard,
htdocument@126.com
to rate and post a comment
Edward Yan
Re: SCHILLER AT-1 cannot print waveform
July 05, 2006 03:46
Is internal built-in printer or external printer having problem on automatic mode? Was it ever working before? Depending on the software, some of the features are not available on the built-in printer. Date and time are not printed out on the internal printer. I suggest you consult with the operator's manual instead.
to rate and post a comment
Jose Morillo
Re: SCHILLER AT-1 cannot print waveform
July 06, 2006 08:00
These equipments are integrated. That mean that there few components you can change in order to solve something.
You don't mention if when youpush AUTO you have an iso electrical line or if the printer never start. If you have an iso electrical line in AUTO but perfect EKG in MANUAL, the main board must be changed. If the print doesn't start in AUTO the soft touch pannel or its controller board must be deffective.
Best Regards.
to rate and post a comment
Nguyen Quy
Re: SCHILLER AT-1 cannot print waveform
July 09, 2006 12:36
Hi,
I have solved one like that. Just a simple thing, re-check the printing paper whether it is in right spot mark dicrection or not? You can not start in auto mode because machine can not detected the paper (mark pooint) so there is no command for that. It's not like a software probelm anyways :-)
Hope it helps! Let me know the result after work.
duyquyg@gmail.com.
QUY
to rate and post a comment
Jose Morillo
Re: SCHILLER AT-1 cannot print waveform
July 10, 2006 10:51
It look like a good idea. Perhaps is the key to solve it. I don't remember is this equipment use marked paper for work or not but your comment is real and possibly the solution.
I have not the problem here. I was triyng to help Yi Huang (see top) to solve the problem.
Best Regards
to rate and post a comment
yi huang
Re: SCHILLER AT-1 cannot print waveform
August 28, 2007 09:54
Thank you very much.it is ok!
to rate and post a comment