I need some body helpme with a 600t mammo unit, that stay blinking only when I try to get in to sub menu 3 (instalation) via mammocon software all the other sub menu are fine, please help me
I did that before, and all the menu works properly since 1 ,2,4, less the options into the menu 3 exactly that I wants , there are any switch for get in?, how much time this take to bring the option in that menu 3?, can I work the mammocon with windows xp?
Dear: the menu 3 is only for factory default, read the advance service manual; if you va a problem with the 400PL12 board, check the diodes on the board.
Brand new OEM Philips & Siemens Parts at unbeatable prices shipping domestically and Includes warranty!
Email P/N for pricing: sales@Relaxationinc.com
(P) 813-925-1314, www.relaxationinc.com
Joel Grullon
senographe 600t install sub menu problem
February 19, 2010 06:03
I need some body helpme with a 600t mammo unit, that stay blinking only when I try to get in to sub menu 3 (instalation) via mammocon software all the other sub menu are fine, please help me
best regards joel grullon
to rate and post a comment
Manuel Casanova
Re: senographe 600t install sub menu problem
March 04, 2010 02:53
Install the DOS in your laptop and recharge mammocom software, and try again.
to rate and post a comment
Joel Grullon
Re: senographe 600t install sub menu problem
March 10, 2010 07:58
I did that before, and all the menu works properly since 1 ,2,4, less the options into the menu 3 exactly that I wants , there are any switch for get in?, how much time this take to bring the option in that menu 3?, can I work the mammocon with windows xp?
to rate and post a comment
Plinio Santos
Re: senographe 600t install sub menu problem
September 01, 2010 01:32
I am also having the same problem. If you could solve, tell me.
to rate and post a comment
Manuel Casanova
Re: senographe 600t install sub menu problem
September 01, 2010 09:57
Dear: the menu 3 is only for factory default, read the advance service manual; if you va a problem with the 400PL12 board, check the diodes on the board.
to rate and post a comment
Abd Ullah
re: Re: senographe 600t install sub menu problem
October 20, 2018 01:25
I need your help please
To do Checksum
abdlaamin0@gmail.com
to rate and post a comment