Dear all,
I have a Sequoia 512 SW 9.51 Shared service ,Cardiac ,Vscular Abdominl.OB,GYN (NO 3D Cardiac )
When I power on system,it be slow on
"Validating the configuration",it cost 2 minute to finish.And then "Report Application Starting" stoped.
Can anybody give me some help?
I have another system 9.51 without Cardiac software,can I use its hard drive?
Thanks
Hi, Your software has been corrupted or the Hard drive is starting to go. If you have the software you can reload it and try the boot up process again. If the hard drive is bad then the reload won't work. You can call Siemens for software and reload procedure. E-mail me if you have questions: jackson-stan@aramark.com
tell me about the error on screen after the problem
if there is no error
pl reboot the system and hold the key gate and v together and watch the screen and record the error
I have a system where the hard drive is good but the software on the drive has gone bad. We can reload the software, if we can get a copy of it. Does someone have the ability to get me a copy of the software. Siemens where I live is no help at all.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
XEI PING
Sequoia 512 is wrong
December 06, 2011 08:34
Dear all,
I have a Sequoia 512 SW 9.51 Shared service ,Cardiac ,Vscular Abdominl.OB,GYN (NO 3D Cardiac )
When I power on system,it be slow on
"Validating the configuration",it cost 2 minute to finish.And then "Report Application Starting" stoped.
Can anybody give me some help?
I have another system 9.51 without Cardiac software,can I use its hard drive?
Thanks
to rate and post a comment
Robert Celmer
Re: Sequoia 512 is wrong
December 06, 2011 05:55
Email me on this
to rate and post a comment
Stanley Jackson
Re: Sequioa is wrong
December 07, 2011 09:19
Hi, Your software has been corrupted or the Hard drive is starting to go. If you have the software you can reload it and try the boot up process again. If the hard drive is bad then the reload won't work. You can call Siemens for software and reload procedure. E-mail me if you have questions: jackson-stan@aramark.com
to rate and post a comment
Kir kavra
re: Re: Sequioa is wrong
September 15, 2015 06:19
I have a problem, my system starts and shutdown after starting the boot up...can you please tell m why? my email is muhc08@gmail.com
donald
to rate and post a comment
Larry Chesler
Re: Sequoia 512 is wrong
December 07, 2011 10:36
Try resetting Application Data from SUI (Service User Interface) and reboot the system.
to rate and post a comment
Kir kavra
re: Re: Sequoia 512 is wrong
September 15, 2015 06:19
I have a problem, my system starts and shutdown after starting the boot up...can you please tell m why? my email is muhc08@gmail.com
donald
to rate and post a comment
Muhammad yousaf
Re: Sequoia 512 is wrong
December 14, 2011 08:45
tell me about the error on screen after the problem
if there is no error
pl reboot the system and hold the key gate and v together and watch the screen and record the error
to rate and post a comment
XEI PING
Re: Sequoia 512 is wrong
December 17, 2011 09:36
At first,wWe checked Hard Drive,it's good.Then we changed the BDM2 Board,system can work now.
Thanks for your reply.
to rate and post a comment
joe leier
Re: Sequoia 512 is wrong
February 04, 2012 11:19
I have a system where the hard drive is good but the software on the drive has gone bad. We can reload the software, if we can get a copy of it. Does someone have the ability to get me a copy of the software. Siemens where I live is no help at all.
to rate and post a comment