I'm having an issue on two Sequoia C512 machines here. When it boots up, the Sequoia C512 loading screen gets stuck and the ultrasound control bar kind of pops on top of it.
Here is the picture. I have tried everything to fix these. I even bought a new hard drive and loaded new software onto it!
I did that as well. It starts the verbose output but about 80% of the way there, the text changes from grey to black so you can't really see what happens at the end. I'll record a video and share it here. Thanks for responding so quickly!
From the moment the cover image is placed, this means that the bios of the computer is working, the next thing to do is to investigate if the two voltages (5.0 & 12.0 do not have to be exact but approximate) are present in the hard disk . A slight noise and a slight heating of the disc are good evidence of its operation
We work with hospitals providing reliable ultrasound systems, probes & parts. By offering sales, service, rentals & repairs, we help our clients access high quality imaging systems while keeping costs low & support simple. Please call 760-834-4777!
Samuel Yarmagyan
Sequoia C512 getting stuck during boot
March 27, 2017 10:10
Hello,
I'm having an issue on two Sequoia C512 machines here. When it boots up, the Sequoia C512 loading screen gets stuck and the ultrasound control bar kind of pops on top of it.
Here is the picture. I have tried everything to fix these. I even bought a new hard drive and loaded new software onto it!
Any ideas?
https://drive.google.com/file/d/0B_iYUY5Y5R47NV9ZT3hCVkl6WjQ/view?usp=sharing
to rate and post a comment
Juancho
re: Sequoia C512 getting stuck during boot
March 28, 2017 09:20
Hi, Samuel
Show any error? Reboot system with MultiHz and V hold until boot up. Send me a photo. Thanks
to rate and post a comment
Samuel Yarmagyan
re: re: Sequoia C512 getting stuck during boot
March 29, 2017 10:20
I did that as well. It starts the verbose output but about 80% of the way there, the text changes from grey to black so you can't really see what happens at the end. I'll record a video and share it here. Thanks for responding so quickly!
to rate and post a comment
Roberto Rojas
re: Sequoia C512 getting stuck during boot
March 29, 2017 10:07
From the moment the cover image is placed, this means that the bios of the computer is working, the next thing to do is to investigate if the two voltages (5.0 & 12.0 do not have to be exact but approximate) are present in the hard disk . A slight noise and a slight heating of the disc are good evidence of its operation
to rate and post a comment
soundultra
re: Sequoia C512 getting stuck during boot
December 26, 2018 08:29
did you ever figure the problem? I have the same issue. Is this a board issue? if so which one? Please help!!
to rate and post a comment