I think that you did not intend to send this email to me.
Meditek Boris
-----Original Message----- From: jirasak99@hotmail.com [mailto:jirasak99@hotmail.com] Sent: Thursday, February 21, 2002 6:25 AM To: Service Issues Forum Subject: Re: services for autoanalyzer
Dear Necati Unal I had prepare service manual for Array 360 protein system I don"t know you still need . Please let me know Best regards jirasak .s
You are subscribed to the DOTmed Service Issues Forum. You may either reply to this email or email directly to service@forums.dotmed.com To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
SIR, THIS IS NOT MY MAIL TO YOU, I DON'T KNOW HOW I EVEN RECEIVED THIS E-MAIL.
----- Original Message ----- From: To: Service Issues Forum Sent: Thursday, February 21, 2002 10:12 AM Subject: RE: services for autoanalyzer
> I think that you did not intend to send this email to me. > > Meditek > Boris > > -----Original Message----- > From: jirasak99@hotmail.com [mailto:jirasak99@hotmail.com] > Sent: Thursday, February 21, 2002 6:25 AM > To: Service Issues Forum > Subject: Re: services for autoanalyzer > > > Dear Necati Unal > I had prepare service manual for Array 360 protein system > I don"t know you still need . Please let me know > Best regards > jirasak .s > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to > service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be > logged in. > > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in. >
----Original Message Follows---- From: boris_shapira@yahoo.com Reply-To: service@forums.dotmed.com To: Service Issues Forum Subject: RE: services for autoanalyzer Date: Thu, 21 Feb 2002 10:12:08 -0500 (EST)
I think that you did not intend to send this email to me.
Meditek Boris
-----Original Message----- From: jirasak99@hotmail.com [mailto:jirasak99@hotmail.com] Sent: Thursday, February 21, 2002 6:25 AM To: Service Issues Forum Subject: Re: services for autoanalyzer
Dear Necati Unal I had prepare service manual for Array 360 protein system I don"t know you still need . Please let me know Best regards jirasak .s
You are subscribed to the DOTmed Service Issues Forum. You may either reply to this email or email directly to service@forums.dotmed.com To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
You are subscribed to the DOTmed Service Issues Forum. You may either reply to this email or email directly to service@forums.dotmed.com To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
Read a good book at my book store. Try IT, you'll like IT. "www.itsbooks.iwonstores.com" All books, all the time.
_________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com
Do you sell/service these intruments currently? Please let us know if you are the Bayer distributor for your country. Thank you.
David Klayman President ----- Original Message ----- From: To: "Service Issues Forum" Sent: Tuesday, February 12, 2002 3:49 AM Subject: services for autoanalyzer
> 1-Beckman Coulture Protein Array > 2-Technicon RA-XT > 3-OpeRA by Bayer > > We need full information(technical document)repair and maintenance for these > > Best regards > > Necati Unal > elektromar@ixir.com > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/users/my/forums.html - You must be logged in. >
We are a 100 bedded Multi Facility Hospital in India H.S.Cheema
--- davidk@labworld1.com wrote: > Dear Sir, > > Do you sell/service these intruments currently? > Please let us know if you > are the Bayer distributor for your country. Thank > you. > > David Klayman > President > ----- Original Message ----- > From: > To: "Service Issues Forum" > > Sent: Tuesday, February 12, 2002 3:49 AM > Subject: services for autoanalyzer > > > > 1-Beckman Coulture Protein Array > > 2-Technicon RA-XT > > 3-OpeRA by Bayer > > > > We need full information(technical document)repair > and maintenance for > these > > > > Best regards > > > > Necati Unal > > elektromar@ixir.com > > > > > > You are subscribed to the DOTmed Service Issues > Forum. > > You may either reply to this email or email > directly to > service@forums.dotmed.com > > To Unsubscribe: go to > https://www.dotmed.com/users/my/forums.html - You > must be logged in. > > > > > > You are subscribed to the DOTmed Service Issues > Forum. > You may either reply to this email or email directly > to service@forums.dotmed.com > To Unsubscribe: go to > https://www.dotmed.com/forums/index.html - You must > be logged in.
__________________________________________________ Do You Yahoo!? Yahoo! Greetings - Send FREE e-cards for every occasion! http://greetings.yahoo.com
no we do not sale or service this type on equipment. Do you know of any one in India that can install and service Siemens Cath/ Angio systems
Rob Manetta VP ----- Original Message ----- From: To: "Service Issues Forum" Sent: Wednesday, February 27, 2002 11:09 AM Subject: Re: services for autoanalyzer
> We are a 100 bedded Multi Facility Hospital in India > H.S.Cheema > > > --- davidk@labworld1.com wrote: > > Dear Sir, > > > > Do you sell/service these intruments currently? > > Please let us know if you > > are the Bayer distributor for your country. Thank > > you. > > > > David Klayman > > President > > ----- Original Message ----- > > From: > > To: "Service Issues Forum" > > > > Sent: Tuesday, February 12, 2002 3:49 AM > > Subject: services for autoanalyzer > > > > > > > 1-Beckman Coulture Protein Array > > > 2-Technicon RA-XT > > > 3-OpeRA by Bayer > > > > > > We need full information(technical document)repair > > and maintenance for > > these > > > > > > Best regards > > > > > > Necati Unal > > > elektromar@ixir.com > > > > > > > > > You are subscribed to the DOTmed Service Issues > > Forum. > > > You may either reply to this email or email > > directly to > > service@forums.dotmed.com > > > To Unsubscribe: go to > > https://www.dotmed.com/users/my/forums.html - You > > must be logged in. > > > > > > > > > > > You are subscribed to the DOTmed Service Issues > > Forum. > > You may either reply to this email or email directly > > to service@forums.dotmed.com > > To Unsubscribe: go to > > https://www.dotmed.com/forums/index.html - You must > > be logged in. > > > __________________________________________________ > Do You Yahoo!? > Yahoo! Greetings - Send FREE e-cards for every occasion! > http://greetings.yahoo.com > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
Rob, I do not know of anyone to install or service them in India but I have one that I aquired from a hospital very inexpensively. If you are interested, I will send you the information you need and just make me an offer because I want to turn it over. It was maintained by Siemens the whole time.
Rick Staab, President ----- Original Message ----- From: To: Service Issues Forum Sent: Wednesday, February 27, 2002 12:01 PM Subject: Re: services for autoanalyzer
> no we do not sale or service this type on equipment. > Do you know of any one in India that can install and service Siemens Cath/ > Angio systems > > Rob Manetta > VP > ----- Original Message ----- > From: > To: "Service Issues Forum" > Sent: Wednesday, February 27, 2002 11:09 AM > Subject: Re: services for autoanalyzer > > > > We are a 100 bedded Multi Facility Hospital in India > > H.S.Cheema > > > > > > --- davidk@labworld1.com wrote: > > > Dear Sir, > > > > > > Do you sell/service these intruments currently? > > > Please let us know if you > > > are the Bayer distributor for your country. Thank > > > you. > > > > > > David Klayman > > > President > > > ----- Original Message ----- > > > From: > > > To: "Service Issues Forum" > > > > > > Sent: Tuesday, February 12, 2002 3:49 AM > > > Subject: services for autoanalyzer > > > > > > > > > > 1-Beckman Coulture Protein Array > > > > 2-Technicon RA-XT > > > > 3-OpeRA by Bayer > > > > > > > > We need full information(technical document)repair > > > and maintenance for > > > these > > > > > > > > Best regards > > > > > > > > Necati Unal > > > > elektromar@ixir.com > > > > > > > > > > > > You are subscribed to the DOTmed Service Issues > > > Forum. > > > > You may either reply to this email or email > > > directly to > > > service@forums.dotmed.com > > > > To Unsubscribe: go to > > > https://www.dotmed.com/users/my/forums.html - You > > > must be logged in. > > > > > > > > > > > > > > > > You are subscribed to the DOTmed Service Issues > > > Forum. > > > You may either reply to this email or email directly > > > to service@forums.dotmed.com > > > To Unsubscribe: go to > > > https://www.dotmed.com/forums/index.html - You must > > > be logged in. > > > > > > __________________________________________________ > > Do You Yahoo!? > > Yahoo! Greetings - Send FREE e-cards for every occasion! > > http://greetings.yahoo.com > > > > > > You are subscribed to the DOTmed Service Issues Forum. > > You may either reply to this email or email directly to > service@forums.dotmed.com > > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must > be logged in. > > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in. >
Rob Manetta, Siemens Corscop C?Polydoros 100, SN01215/01372, Camtronic VP3 Digital System Corskop, C/XRE pedestal Table Sirecon Triplex 11/7/5 Image Intensifier/Vidomed C. Video System/Videomatic Auto Dose Regulation for TV Flouroscopy/single plane Cine for Polydoros/polydoros 100HK-AA Ganerator for connection to two double focus tubes/Flouroscopic Module/heat integrator PIIonomat DConnection/Cinarex Processor.
Make any offer. Rick ----- Original Message ----- From: To: Service Issues Forum Sent: Wednesday, February 27, 2002 12:01 PM Subject: Re: services for autoanalyzer
> no we do not sale or service this type on equipment. > Do you know of any one in India that can install and service Siemens Cath/ > Angio systems > > Rob Manetta > VP > ----- Original Message ----- > From: > To: "Service Issues Forum" > Sent: Wednesday, February 27, 2002 11:09 AM > Subject: Re: services for autoanalyzer > > > > We are a 100 bedded Multi Facility Hospital in India > > H.S.Cheema > > > > > > --- davidk@labworld1.com wrote: > > > Dear Sir, > > > > > > Do you sell/service these intruments currently? > > > Please let us know if you > > > are the Bayer distributor for your country. Thank > > > you. > > > > > > David Klayman > > > President > > > ----- Original Message ----- > > > From: > > > To: "Service Issues Forum" > > > > > > Sent: Tuesday, February 12, 2002 3:49 AM > > > Subject: services for autoanalyzer > > > > > > > > > > 1-Beckman Coulture Protein Array > > > > 2-Technicon RA-XT > > > > 3-OpeRA by Bayer > > > > > > > > We need full information(technical document)repair > > > and maintenance for > > > these > > > > > > > > Best regards > > > > > > > > Necati Unal > > > > elektromar@ixir.com > > > > > > > > > > > > You are subscribed to the DOTmed Service Issues > > > Forum. > > > > You may either reply to this email or email > > > directly to > > > service@forums.dotmed.com > > > > To Unsubscribe: go to > > > https://www.dotmed.com/users/my/forums.html - You > > > must be logged in. > > > > > > > > > > > > > > > > You are subscribed to the DOTmed Service Issues > > > Forum. > > > You may either reply to this email or email directly > > > to service@forums.dotmed.com > > > To Unsubscribe: go to > > > https://www.dotmed.com/forums/index.html - You must > > > be logged in. > > > > > > __________________________________________________ > > Do You Yahoo!? > > Yahoo! Greetings - Send FREE e-cards for every occasion! > > http://greetings.yahoo.com > > > > > > You are subscribed to the DOTmed Service Issues Forum. > > You may either reply to this email or email directly to > service@forums.dotmed.com > > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must > be logged in. > > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in. >
dear rob manetta thanks for the email and i have people can instal service any siemens cath angio systems and if want any other information can send more information which you'r looking and i will get back to you.
Thank you for your email. I am sorry that we cannot help you with your requ= est. We deal almost exclusively with Diagnostic Imaging equipment.
Please email us or check our website for more information: http://www.integ= ritymed.com
Sincerely, David B. Denholtz
>On 2/27/02 10:26:55 service@forums.dotmed.com wrote: > >Dear Sir, > >Do you sell/service these intruments currently? Please let us know if you >are the Bayer distributor for your country. Thank you. > >David Klayman >President >----- Original Message ----- >From: >To: "Service Issues Forum" >Sent: Tuesday, February 12, 2002 3:49 AM >Subject: services for autoanalyzer > > >> 1-Beckman Coulture Protein Array >> 2-Technicon RA-XT >> 3-OpeRA by Bayer >> >> We need full information(technical document)repair and maintenance for >these >> >> Best regards >> >> Necati Unal >> elektromar@ixir.com >> >> >> You are subscribed to the DOTmed Service Issues Forum. >> You may either reply to this email or email directly to >service@forums.dotmed.com >> To Unsubscribe: go to https://www.dotmed.com/users/my/forums.html - You >must be logged in. >> > > > >You are subscribed to the DOTmed Service Issues Forum. >You may either reply to this email or email directly to service@forums.dot= med.com >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b= e logged in. >
>On 2/27/02 12:13:53 service@forums.dotmed.com wrote: > >Rob Manetta, >Siemens Corscop C?Polydoros 100, SN01215/01372, Camtronic VP3 Digital Syst= em >Corskop, C/XRE pedestal Table Sirecon >Triplex 11/7/5 Image Intensifier/Vidomed C. Video System/Videomatic Auto >Dose >Regulation for TV Flouroscopy/single plane Cine for Polydoros/polydoros >100HK-AA Ganerator for connection to two double focus tubes/Flouroscopic >Module/heat integrator PIIonomat DConnection/Cinarex Processor. > >Make any offer. >Rick >----- Original Message ----- >From: >To: Service Issues Forum >Sent: Wednesday, February 27, 2002 12:01 PM >Subject: Re: services for autoanalyzer > > >> no we do not sale or service this type on equipment. >> Do you know of any one in India that can install and service Siemens Cat= h/ >> Angio systems >> >> Rob Manetta >> VP >> ----- Original Message ----- >> From: >> To: "Service Issues Forum" >> Sent: Wednesday, February 27, 2002 11:09 AM >> Subject: Re: services for autoanalyzer >> >> >> > We are a 100 bedded Multi Facility Hospital in India >> > H.S.Cheema >> > >> > >> > --- davidk@labworld1.com wrote: >> > > Dear Sir, >> > > >> > > Do you sell/service these intruments currently? >> > > Please let us know if you >> > > are the Bayer distributor for your country. Thank >> > > you. >> > > >> > > David Klayman >> > > President >> > > ----- Original Message ----- >> > > From: >> > > To: "Service Issues Forum" >> > > >> > > Sent: Tuesday, February 12, 2002 3:49 AM >> > > Subject: services for autoanalyzer >> > > >> > > >> > > > 1-Beckman Coulture Protein Array >> > > > 2-Technicon RA-XT >> > > > 3-OpeRA by Bayer >> > > > >> > > > We need full information(technical document)repair >> > > and maintenance for >> > > these >> > > > >> > > > Best regards >> > > > >> > > > Necati Unal >> > > > elektromar@ixir.com >> > > > >> > > > >> > > > You are subscribed to the DOTmed Service Issues >> > > Forum. >> > > > You may either reply to this email or email >> > > directly to >> > > service@forums.dotmed.com >> > > > To Unsubscribe: go to >> > > https://www.dotmed.com/users/my/forums.html - You >> > > must be logged in. >> > > > >> > > >> > > >> > > >> > > You are subscribed to the DOTmed Service Issues >> > > Forum. >> > > You may either reply to this email or email directly >> > > to service@forums.dotmed.com >> > > To Unsubscribe: go to >> > > https://www.dotmed.com/forums/index.html - You must >> > > be logged in. >> > >> > >> > __________________________________________________ >> > Do You Yahoo!? >> > Yahoo! Greetings - Send FREE e-cards for every occasion! >> > http://greetings.yahoo.com >> > >> > >> > You are subscribed to the DOTmed Service Issues Forum. >> > You may either reply to this email or email directly to >> service@forums.dotmed.com >> > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You mu= st >> be logged in. >> >> >> >> You are subscribed to the DOTmed Service Issues Forum. >> You may either reply to this email or email directly to >service@forums.dotmed.com >> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must >be logged in. >> > > > > >You are subscribed to the DOTmed Service Issues Forum. >You may either reply to this email or email directly to service@forums.dot= med.com >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b= e logged in. >
I am interested as well. Please send information on installers.
Sincerely, David B. Denholtz oooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooo
Integrity Medical Systems, Inc. "Diagnostic Imaging Excellence Since 1989" CORPORATE OFFICE/REFURBISHING FACILITY: 2164 Andrea Lane, Fort Myers, FL 33912 USA TOLL-FREE: 800-722-3646 TEL: 941.454.9555 FAX: 941.454.9599 OUR EMAIL ADDRESSES: sales@IntegrityMed.com (Sales) parts@integritymed.com (Parts Sales) interims@integritymed.com (Interim Rentals) members@integritymed.com (Website Membership Inquiries) dfk@integritymed.com (To Sell Your Equipment, Don) sed@integritymed.com (Client Services & Parts, Sheena) rjd@integritymed.com (Accounts, Rhonda) mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio) ism@integritymed.com (Ismael, Warehouse Receiving) poj@integritymed.com (Shipping, Peggy) info@integritymed.com (General Inquiries) entity@integritymed.com (Webmasters, Barry & Shane) http://www.integritymed.com (WEB-SITE)
>On 2/27/02 12:27:54 service@forums.dotmed.com wrote: > >dear rob manetta thanks for the email and i have people can instal service= any siemens cath angio systems and if want any other information can send = more information which you'r looking and i will get back to you. > >thanks >venka >shyam usa > > >You are subscribed to the DOTmed Service Issues Forum. >You may either reply to this email or email directly to service@forums.dot= med.com >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b= e logged in. >
Since 1989 our quality refurbished equipment has been sold to buyers in 63 = countries. Our website, updated daily, and our IN-STOCK inventory-- perhaps= the largest in the USA-- includes CT, MRI, Ultrasound, X-Ray, Cath/Angio, = Nuclear SPECT, Mammo, C-Arms, Linacs, and Bone Densitometers. Every piece = of equipment we sell is 100% warrantied to meet or exceed manufacturer's sp= ecifications before it leaves our testing and refurbishing facility.
Sincerely, David B. Denholtz
>On 2/27/02 11:08:54 service@forums.dotmed.com wrote: > >We are a 100 bedded Multi Facility Hospital in India >H.S.Cheema > > >--- davidk@labworld1.com wrote: >> Dear Sir, >> >> Do you sell/service these intruments currently? >> Please let us know if you >> are the Bayer distributor for your country. Thank >> you. >> >> David Klayman >> President >> ----- Original Message ----- >> From: >> To: "Service Issues Forum" >> >> Sent: Tuesday, February 12, 2002 3:49 AM >> Subject: services for autoanalyzer >> >> >> > 1-Beckman Coulture Protein Array >> > 2-Technicon RA-XT >> > 3-OpeRA by Bayer >> > >> > We need full information(technical document)repair >> and maintenance for >> these >> > >> > Best regards >> > >> > Necati Unal >> > elektromar@ixir.com >> > >> > >> > You are subscribed to the DOTmed Service Issues >> Forum. >> > You may either reply to this email or email >> directly to >> service@forums.dotmed.com >> > To Unsubscribe: go to >> https://www.dotmed.com/users/my/forums.html - You >> must be logged in. >> > >> >> >> >> You are subscribed to the DOTmed Service Issues >> Forum. >> You may either reply to this email or email directly >> to service@forums.dotmed.com >> To Unsubscribe: go to >> https://www.dotmed.com/forums/index.html - You must >> be logged in. > > >__________________________________________________ >Do You Yahoo!? >Yahoo! Greetings - Send FREE e-cards for every occasion! >http://greetings.yahoo.com > > >You are subscribed to the DOTmed Service Issues Forum. >You may either reply to this email or email directly to service@forums.dot= med.com >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b= e logged in. >
ok send me all the specs' Rob ----- Original Message ----- From: To: "Service Issues Forum" Sent: Wednesday, February 27, 2002 12:07 PM Subject: Re: services for autoanalyzer
> Rob, I do not know of anyone to install or service them in India but I have > one that I aquired from a hospital very inexpensively. If you are > interested, I will send you the information you need and just make me an > offer because I want to turn it over. It was maintained by Siemens the whole > time. > > Rick Staab, President > ----- Original Message ----- > From: > To: Service Issues Forum > Sent: Wednesday, February 27, 2002 12:01 PM > Subject: Re: services for autoanalyzer > > > > no we do not sale or service this type on equipment. > > Do you know of any one in India that can install and service Siemens Cath/ > > Angio systems > > > > Rob Manetta > > VP > > ----- Original Message ----- > > From: > > To: "Service Issues Forum" > > Sent: Wednesday, February 27, 2002 11:09 AM > > Subject: Re: services for autoanalyzer > > > > > > > We are a 100 bedded Multi Facility Hospital in India > > > H.S.Cheema > > > > > > > > > --- davidk@labworld1.com wrote: > > > > Dear Sir, > > > > > > > > Do you sell/service these intruments currently? > > > > Please let us know if you > > > > are the Bayer distributor for your country. Thank > > > > you. > > > > > > > > David Klayman > > > > President > > > > ----- Original Message ----- > > > > From: > > > > To: "Service Issues Forum" > > > > > > > > Sent: Tuesday, February 12, 2002 3:49 AM > > > > Subject: services for autoanalyzer > > > > > > > > > > > > > 1-Beckman Coulture Protein Array > > > > > 2-Technicon RA-XT > > > > > 3-OpeRA by Bayer > > > > > > > > > > We need full information(technical document)repair > > > > and maintenance for > > > > these > > > > > > > > > > Best regards > > > > > > > > > > Necati Unal > > > > > elektromar@ixir.com > > > > > > > > > > > > > > > You are subscribed to the DOTmed Service Issues > > > > Forum. > > > > > You may either reply to this email or email > > > > directly to > > > > service@forums.dotmed.com > > > > > To Unsubscribe: go to > > > > https://www.dotmed.com/users/my/forums.html - You > > > > must be logged in. > > > > > > > > > > > > > > > > > > > > > You are subscribed to the DOTmed Service Issues > > > > Forum. > > > > You may either reply to this email or email directly > > > > to service@forums.dotmed.com > > > > To Unsubscribe: go to > > > > https://www.dotmed.com/forums/index.html - You must > > > > be logged in. > > > > > > > > > __________________________________________________ > > > Do You Yahoo!? > > > Yahoo! Greetings - Send FREE e-cards for every occasion! > > > http://greetings.yahoo.com > > > > > > > > > You are subscribed to the DOTmed Service Issues Forum. > > > You may either reply to this email or email directly to > > service@forums.dotmed.com > > > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must > > be logged in. > > > > > > > > You are subscribed to the DOTmed Service Issues Forum. > > You may either reply to this email or email directly to > service@forums.dotmed.com > > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must > be logged in. > > > > > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
I have a Doctor that has Purchased some equipment from and is interested in a Siemens cath lab but don't have any one to install or service it . can you please forward the person name and contact information so I can send it to my client
Thank you very much for your help.
Rob Manetta ---- Original Message ----- From: To: "Service Issues Forum" Sent: Wednesday, February 27, 2002 12:28 PM Subject: Re: services for autoanalyzer
> dear rob manetta thanks for the email and i have people can instal service any siemens cath angio systems and if want any other information can send more information which you'r looking and i will get back to you. > > thanks > venka > shyam usa > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
David, Make me an offer. It won't take much. I am familliar with you and your company and would love to do some more business with you. Rick ----- Original Message ----- From: To: Service Issues Forum Sent: Wednesday, February 27, 2002 12:47 PM Subject: Re: Re: services for autoanalyzer
> Rick, > > How much for Coroskop? > > Sincerely, > David B. Denholtz > > > >On 2/27/02 12:13:53 service@forums.dotmed.com wrote: > > > >Rob Manetta, > >Siemens Corscop C?Polydoros 100, SN01215/01372, Camtronic VP3 Digital Syst= > em > >Corskop, C/XRE pedestal Table Sirecon > >Triplex 11/7/5 Image Intensifier/Vidomed C. Video System/Videomatic Auto > >Dose > >Regulation for TV Flouroscopy/single plane Cine for Polydoros/polydoros > >100HK-AA Ganerator for connection to two double focus tubes/Flouroscopic > >Module/heat integrator PIIonomat DConnection/Cinarex Processor. > > > >Make any offer. > >Rick > >----- Original Message ----- > >From: > >To: Service Issues Forum > >Sent: Wednesday, February 27, 2002 12:01 PM > >Subject: Re: services for autoanalyzer > > > > > >> no we do not sale or service this type on equipment. > >> Do you know of any one in India that can install and service Siemens Cat= > h/ > >> Angio systems > >> > >> Rob Manetta > >> VP > >> ----- Original Message ----- > >> From: > >> To: "Service Issues Forum" > >> Sent: Wednesday, February 27, 2002 11:09 AM > >> Subject: Re: services for autoanalyzer > >> > >> > >> > We are a 100 bedded Multi Facility Hospital in India > >> > H.S.Cheema > >> > > >> > > >> > --- davidk@labworld1.com wrote: > >> > > Dear Sir, > >> > > > >> > > Do you sell/service these intruments currently? > >> > > Please let us know if you > >> > > are the Bayer distributor for your country. Thank > >> > > you. > >> > > > >> > > David Klayman > >> > > President > >> > > ----- Original Message ----- > >> > > From: > >> > > To: "Service Issues Forum" > >> > > > >> > > Sent: Tuesday, February 12, 2002 3:49 AM > >> > > Subject: services for autoanalyzer > >> > > > >> > > > >> > > > 1-Beckman Coulture Protein Array > >> > > > 2-Technicon RA-XT > >> > > > 3-OpeRA by Bayer > >> > > > > >> > > > We need full information(technical document)repair > >> > > and maintenance for > >> > > these > >> > > > > >> > > > Best regards > >> > > > > >> > > > Necati Unal > >> > > > elektromar@ixir.com > >> > > > > >> > > > > >> > > > You are subscribed to the DOTmed Service Issues > >> > > Forum. > >> > > > You may either reply to this email or email > >> > > directly to > >> > > service@forums.dotmed.com > >> > > > To Unsubscribe: go to > >> > > https://www.dotmed.com/users/my/forums.html - You > >> > > must be logged in. > >> > > > > >> > > > >> > > > >> > > > >> > > You are subscribed to the DOTmed Service Issues > >> > > Forum. > >> > > You may either reply to this email or email directly > >> > > to service@forums.dotmed.com > >> > > To Unsubscribe: go to > >> > > https://www.dotmed.com/forums/index.html - You must > >> > > be logged in. > >> > > >> > > >> > __________________________________________________ > >> > Do You Yahoo!? > >> > Yahoo! Greetings - Send FREE e-cards for every occasion! > >> > http://greetings.yahoo.com > >> > > >> > > >> > You are subscribed to the DOTmed Service Issues Forum. > >> > You may either reply to this email or email directly to > >> service@forums.dotmed.com > >> > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You mu= > st > >> be logged in. > >> > >> > >> > >> You are subscribed to the DOTmed Service Issues Forum. > >> You may either reply to this email or email directly to > >service@forums.dotmed.com > >> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must > >be logged in. > >> > > > > > > > > > >You are subscribed to the DOTmed Service Issues Forum. > >You may either reply to this email or email directly to service@forums.dot= > med.com > >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b= > e logged in. > > > > > oooooooooooooooooooooooooooooooooo > oooooooooooooooooooooooooooooooooo > > Integrity Medical Systems, Inc. > "Diagnostic Imaging Excellence Since 1989" > NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY: > 2164 Andrea Lane, Fort Myers, FL 33912 USA > TEL: 941.454.9555 > FAX: 941.454.9599 > OUR EMAIL ADDRESSES: > sales@IntegrityMed.com (Sales) > parts@integritymed.com (Parts Sales) > members@integritymed.com (Website Membership Inquiries) > dfk@integritymed.com (To Sell Your Equipment, Don) > sed@integritymed.com (Customer Service, Sheena) > rjd@integritymed.com (Marketing, Rhonda) > mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio) > info@integritymed.com (General Inquiries) > http://www.integritymed.com (WEB-SITE) > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in. >
----- Original Message ----- From: To: "Service Issues Forum" Sent: Wednesday, February 27, 2002 2:10 PM Subject: Re: Re: services for autoanalyzer
> Dear Mr. Denholtz, > > Please do not use the DOTmed Forums to promote your company or the services that you offer. > > The Forums are not to be used for general advertisement but for specific Service Issues. > > We have a number of inexpensive advertising options on DOTmed for as little as $10 per month. If you find our Forums useful, consider advertising. > > Thank you for using DOTmed > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
What a magnificent job of marketing! However, you forgot to mention the numerous lawsuits and judgements against you during the history of your used medical equipment business. It could be that you are burdened by clients and customers who are overly zealous towards litigation, so David, do you care to be responsible to those within this open forum and deal with those suits and judgements on a case by case basis?
As President of IAMERS, I have a personal knowledge of some of your business activities. With your agreement, I will be glad to research additional cases. We could just list them factually without comment so that the readers of this forum can make their own decisions, or contact you directly for an explanation. What do you think?
Don Bogutski President IAMERS
dbd@integritymed.com wrote: > > Dear Mr. H.S. Cheema, > > Please let us know how we can help. > > Since 1989 our quality refurbished equipment has been sold to buyers in 63 = > countries. Our website, updated daily, and our IN-STOCK inventory-- perhaps= > the largest in the USA-- includes CT, MRI, Ultrasound, X-Ray, Cath/Angio, = > Nuclear SPECT, Mammo, C-Arms, Linacs, and Bone Densitometers. Every piece = > of equipment we sell is 100% warrantied to meet or exceed manufacturer's sp= > ecifications before it leaves our testing and refurbishing facility. > > Sincerely, > David B. Denholtz > > >On 2/27/02 11:08:54 service@forums.dotmed.com wrote: > > > >We are a 100 bedded Multi Facility Hospital in India > >H.S.Cheema > > > > > >--- davidk@labworld1.com wrote: > >> Dear Sir, > >> > >> Do you sell/service these intruments currently? > >> Please let us know if you > >> are the Bayer distributor for your country. Thank > >> you. > >> > >> David Klayman > >> President > >> ----- Original Message ----- > >> From: > >> To: "Service Issues Forum" > >> > >> Sent: Tuesday, February 12, 2002 3:49 AM > >> Subject: services for autoanalyzer > >> > >> > >> > 1-Beckman Coulture Protein Array > >> > 2-Technicon RA-XT > >> > 3-OpeRA by Bayer > >> > > >> > We need full information(technical document)repair > >> and maintenance for > >> these > >> > > >> > Best regards > >> > > >> > Necati Unal > >> > elektromar@ixir.com > >> > > >> > > >> > You are subscribed to the DOTmed Service Issues > >> Forum. > >> > You may either reply to this email or email > >> directly to > >> service@forums.dotmed.com > >> > To Unsubscribe: go to > >> https://www.dotmed.com/users/my/forums.html - You > >> must be logged in. > >> > > >> > >> > >> > >> You are subscribed to the DOTmed Service Issues > >> Forum. > >> You may either reply to this email or email directly > >> to service@forums.dotmed.com > >> To Unsubscribe: go to > >> https://www.dotmed.com/forums/index.html - You must > >> be logged in. > > > > > >__________________________________________________ > >Do You Yahoo!? > >Yahoo! Greetings - Send FREE e-cards for every occasion! > >http://greetings.yahoo.com > > > > > >You are subscribed to the DOTmed Service Issues Forum. > >You may either reply to this email or email directly to service@forums.dot= > med.com > >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b= > e logged in. > > > > oooooooooooooooooooooooooooooooooo > oooooooooooooooooooooooooooooooooo > > Integrity Medical Systems, Inc. > "Diagnostic Imaging Excellence Since 1989" > NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY: > 2164 Andrea Lane, Fort Myers, FL 33912 USA > TEL: 941.454.9555 > FAX: 941.454.9599 > OUR EMAIL ADDRESSES: > sales@IntegrityMed.com (Sales) > parts@integritymed.com (Parts Sales) > members@integritymed.com (Website Membership Inquiries) > dfk@integritymed.com (To Sell Your Equipment, Don) > sed@integritymed.com (Customer Service, Sheena) > rjd@integritymed.com (Marketing, Rhonda) > mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio) > info@integritymed.com (General Inquiries) > http://www.integritymed.com (WEB-SITE) > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
What a magnificent job of marketing! However, you forgot to mention the numerous lawsuits and judgements against you during the history of your used medical equipment business. It could be that you are burdened by clients and customers who are overly zealous towards litigation, so David, do you care to be responsible to those within this open forum and deal with those suits and judgements on a case by case basis?
As President of IAMERS, I have a personal knowledge of some of your business activities. With your agreement, I will be glad to research additional cases. We could just list them factually without comment so that the readers of this forum can make their own decisions, or contact you directly for an explanation. What do you think?
Don Bogutski President IAMERS
dbd@integritymed.com wrote: > > Dear Mr. H.S. Cheema, > > Please let us know how we can help. > > Since 1989 our quality refurbished equipment has been sold to buyers in 63 = > countries. Our website, updated daily, and our IN-STOCK inventory-- perhaps= > the largest in the USA-- includes CT, MRI, Ultrasound, X-Ray, Cath/Angio, = > Nuclear SPECT, Mammo, C-Arms, Linacs, and Bone Densitometers. Every piece = > of equipment we sell is 100% warrantied to meet or exceed manufacturer's sp= > ecifications before it leaves our testing and refurbishing facility. > > Sincerely, > David B. Denholtz > > >On 2/27/02 11:08:54 service@forums.dotmed.com wrote: > > > >We are a 100 bedded Multi Facility Hospital in India > >H.S.Cheema > > > > > >--- davidk@labworld1.com wrote: > >> Dear Sir, > >> > >> Do you sell/service these intruments currently? > >> Please let us know if you > >> are the Bayer distributor for your country. Thank > >> you. > >> > >> David Klayman > >> President > >> ----- Original Message ----- > >> From: > >> To: "Service Issues Forum" > >> > >> Sent: Tuesday, February 12, 2002 3:49 AM > >> Subject: services for autoanalyzer > >> > >> > >> > 1-Beckman Coulture Protein Array > >> > 2-Technicon RA-XT > >> > 3-OpeRA by Bayer > >> > > >> > We need full information(technical document)repair > >> and maintenance for > >> these > >> > > >> > Best regards > >> > > >> > Necati Unal > >> > elektromar@ixir.com > >> > > >> > > >> > You are subscribed to the DOTmed Service Issues > >> Forum. > >> > You may either reply to this email or email > >> directly to > >> service@forums.dotmed.com > >> > To Unsubscribe: go to > >> https://www.dotmed.com/users/my/forums.html - You > >> must be logged in. > >> > > >> > >> > >> > >> You are subscribed to the DOTmed Service Issues > >> Forum. > >> You may either reply to this email or email directly > >> to service@forums.dotmed.com > >> To Unsubscribe: go to > >> https://www.dotmed.com/forums/index.html - You must > >> be logged in. > > > > > >__________________________________________________ > >Do You Yahoo!? > >Yahoo! Greetings - Send FREE e-cards for every occasion! > >http://greetings.yahoo.com > > > > > >You are subscribed to the DOTmed Service Issues Forum. > >You may either reply to this email or email directly to service@forums.dot= > med.com > >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b= > e logged in. > > > > oooooooooooooooooooooooooooooooooo > oooooooooooooooooooooooooooooooooo > > Integrity Medical Systems, Inc. > "Diagnostic Imaging Excellence Since 1989" > NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY: > 2164 Andrea Lane, Fort Myers, FL 33912 USA > TEL: 941.454.9555 > FAX: 941.454.9599 > OUR EMAIL ADDRESSES: > sales@IntegrityMed.com (Sales) > parts@integritymed.com (Parts Sales) > members@integritymed.com (Website Membership Inquiries) > dfk@integritymed.com (To Sell Your Equipment, Don) > sed@integritymed.com (Customer Service, Sheena) > rjd@integritymed.com (Marketing, Rhonda) > mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio) > info@integritymed.com (General Inquiries) > http://www.integritymed.com (WEB-SITE) > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
There is also another crook to watch , he is Michael Abboud , Monarch Medical of Staten Island , N.Y. ----- Original Message ----- From: To: Service Issues Forum Sent: Thursday, February 28, 2002 3:27 AM Subject: Re: services for autoanalyzer
> Hey David: > > What a magnificent job of marketing! However, you forgot to mention the > numerous lawsuits and judgements against you during the history of your > used medical equipment business. It could be that you are burdened by > clients and customers who are overly zealous towards litigation, so > David, do you care to be responsible to those within this open forum and > deal with those suits and judgements on a case by case basis? > > As President of IAMERS, I have a personal knowledge of some of your > business activities. With your agreement, I will be glad to research > additional cases. We could just list them factually without comment so > that the readers of this forum can make their own decisions, or contact > you directly for an explanation. What do you think? > > Don Bogutski > President > IAMERS > > dbd@integritymed.com wrote: > > > > Dear Mr. H.S. Cheema, > > > > Please let us know how we can help. > > > > Since 1989 our quality refurbished equipment has been sold to buyers in 63 = > > countries. Our website, updated daily, and our IN-STOCK inventory-- perhaps= > > the largest in the USA-- includes CT, MRI, Ultrasound, X-Ray, Cath/Angio, = > > Nuclear SPECT, Mammo, C-Arms, Linacs, and Bone Densitometers. Every piece = > > of equipment we sell is 100% warrantied to meet or exceed manufacturer's sp= > > ecifications before it leaves our testing and refurbishing facility. > > > > Sincerely, > > David B. Denholtz > > > > >On 2/27/02 11:08:54 service@forums.dotmed.com wrote: > > > > > >We are a 100 bedded Multi Facility Hospital in India > > >H.S.Cheema > > > > > > > > >--- davidk@labworld1.com wrote: > > >> Dear Sir, > > >> > > >> Do you sell/service these intruments currently? > > >> Please let us know if you > > >> are the Bayer distributor for your country. Thank > > >> you. > > >> > > >> David Klayman > > >> President > > >> ----- Original Message ----- > > >> From: > > >> To: "Service Issues Forum" > > >> > > >> Sent: Tuesday, February 12, 2002 3:49 AM > > >> Subject: services for autoanalyzer > > >> > > >> > > >> > 1-Beckman Coulture Protein Array > > >> > 2-Technicon RA-XT > > >> > 3-OpeRA by Bayer > > >> > > > >> > We need full information(technical document)repair > > >> and maintenance for > > >> these > > >> > > > >> > Best regards > > >> > > > >> > Necati Unal > > >> > elektromar@ixir.com > > >> > > > >> > > > >> > You are subscribed to the DOTmed Service Issues > > >> Forum. > > >> > You may either reply to this email or email > > >> directly to > > >> service@forums.dotmed.com > > >> > To Unsubscribe: go to > > >> https://www.dotmed.com/users/my/forums.html - You > > >> must be logged in. > > >> > > > >> > > >> > > >> > > >> You are subscribed to the DOTmed Service Issues > > >> Forum. > > >> You may either reply to this email or email directly > > >> to service@forums.dotmed.com > > >> To Unsubscribe: go to > > >> https://www.dotmed.com/forums/index.html - You must > > >> be logged in. > > > > > > > > >__________________________________________________ > > >Do You Yahoo!? > > >Yahoo! Greetings - Send FREE e-cards for every occasion! > > >http://greetings.yahoo.com > > > > > > > > >You are subscribed to the DOTmed Service Issues Forum. > > >You may either reply to this email or email directly to service@forums.dot= > > med.com > > >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b= > > e logged in. > > > > > > > oooooooooooooooooooooooooooooooooo > > oooooooooooooooooooooooooooooooooo > > > > Integrity Medical Systems, Inc. > > "Diagnostic Imaging Excellence Since 1989" > > NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY: > > 2164 Andrea Lane, Fort Myers, FL 33912 USA > > TEL: 941.454.9555 > > FAX: 941.454.9599 > > OUR EMAIL ADDRESSES: > > sales@IntegrityMed.com (Sales) > > parts@integritymed.com (Parts Sales) > > members@integritymed.com (Website Membership Inquiries) > > dfk@integritymed.com (To Sell Your Equipment, Don) > > sed@integritymed.com (Customer Service, Sheena) > > rjd@integritymed.com (Marketing, Rhonda) > > mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio) > > info@integritymed.com (General Inquiries) > > http://www.integritymed.com (WEB-SITE) > > > > You are subscribed to the DOTmed Service Issues Forum. > > You may either reply to this email or email directly to service@forums.dotmed.com > > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in. > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in. >
David Parten VP/Sales Manager PPX Imaging, Inc. davidparten@ppximaging.com ----- Original Message ----- From: To: "Service Issues Forum" Sent: Wednesday, February 27, 2002 9:27 AM Subject: Re: services for autoanalyzer
> Dear Sir, > > Do you sell/service these intruments currently? Please let us know if you > are the Bayer distributor for your country. Thank you. > > David Klayman > President > ----- Original Message ----- > From: > To: "Service Issues Forum" > Sent: Tuesday, February 12, 2002 3:49 AM > Subject: services for autoanalyzer > > > > 1-Beckman Coulture Protein Array > > 2-Technicon RA-XT > > 3-OpeRA by Bayer > > > > We need full information(technical document)repair and maintenance for > these > > > > Best regards > > > > Necati Unal > > elektromar@ixir.com > > > > > > You are subscribed to the DOTmed Service Issues Forum. > > You may either reply to this email or email directly to > service@forums.dotmed.com > > To Unsubscribe: go to https://www.dotmed.com/users/my/forums.html - You > must be logged in. > > > > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
Please add to your list another crook Michael Abboud , Monarch Medical of Staten Island , N.Y. who also has taken our hospital money , selling a CT which never belongs to him.We have tried to settle the problem peacerfully but to no avail. The used equipments business has been so helpful especially in time of economic difficulties,We have to get rid of those irresponsible guys.
DR.Abdul Radjak. M.H.Thamrin Hospital , Jakarta - Indonesia. ----- Original Message ----- From: To: Service Issues Forum Sent: Thursday, February 28, 2002 3:27 AM Subject: Re: services for autoanalyzer
> Hey David: > > What a magnificent job of marketing! However, you forgot to mention the > numerous lawsuits and judgements against you during the history of your > used medical equipment business. It could be that you are burdened by > clients and customers who are overly zealous towards litigation, so > David, do you care to be responsible to those within this open forum and > deal with those suits and judgements on a case by case basis? > > As President of IAMERS, I have a personal knowledge of some of your > business activities. With your agreement, I will be glad to research > additional cases. We could just list them factually without comment so > that the readers of this forum can make their own decisions, or contact > you directly for an explanation. What do you think? > > Don Bogutski > President > IAMERS > > dbd@integritymed.com wrote: > > > > Dear Mr. H.S. Cheema, > > > > Please let us know how we can help. > > > > Since 1989 our quality refurbished equipment has been sold to buyers in 63 = > > countries. Our website, updated daily, and our IN-STOCK inventory-- perhaps= > > the largest in the USA-- includes CT, MRI, Ultrasound, X-Ray, Cath/Angio, = > > Nuclear SPECT, Mammo, C-Arms, Linacs, and Bone Densitometers. Every piece = > > of equipment we sell is 100% warrantied to meet or exceed manufacturer's sp= > > ecifications before it leaves our testing and refurbishing facility. > > > > Sincerely, > > David B. Denholtz > > > > >On 2/27/02 11:08:54 service@forums.dotmed.com wrote: > > > > > >We are a 100 bedded Multi Facility Hospital in India > > >H.S.Cheema > > > > > > > > >--- davidk@labworld1.com wrote: > > >> Dear Sir, > > >> > > >> Do you sell/service these intruments currently? > > >> Please let us know if you > > >> are the Bayer distributor for your country. Thank > > >> you. > > >> > > >> David Klayman > > >> President > > >> ----- Original Message ----- > > >> From: > > >> To: "Service Issues Forum" > > >> > > >> Sent: Tuesday, February 12, 2002 3:49 AM > > >> Subject: services for autoanalyzer > > >> > > >> > > >> > 1-Beckman Coulture Protein Array > > >> > 2-Technicon RA-XT > > >> > 3-OpeRA by Bayer > > >> > > > >> > We need full information(technical document)repair > > >> and maintenance for > > >> these > > >> > > > >> > Best regards > > >> > > > >> > Necati Unal > > >> > elektromar@ixir.com > > >> > > > >> > > > >> > You are subscribed to the DOTmed Service Issues > > >> Forum. > > >> > You may either reply to this email or email > > >> directly to > > >> service@forums.dotmed.com > > >> > To Unsubscribe: go to > > >> https://www.dotmed.com/users/my/forums.html - You > > >> must be logged in. > > >> > > > >> > > >> > > >> > > >> You are subscribed to the DOTmed Service Issues > > >> Forum. > > >> You may either reply to this email or email directly > > >> to service@forums.dotmed.com > > >> To Unsubscribe: go to > > >> https://www.dotmed.com/forums/index.html - You must > > >> be logged in. > > > > > > > > >__________________________________________________ > > >Do You Yahoo!? > > >Yahoo! Greetings - Send FREE e-cards for every occasion! > > >http://greetings.yahoo.com > > > > > > > > >You are subscribed to the DOTmed Service Issues Forum. > > >You may either reply to this email or email directly to service@forums.dot= > > med.com > > >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b= > > e logged in. > > > > > > > oooooooooooooooooooooooooooooooooo > > oooooooooooooooooooooooooooooooooo > > > > Integrity Medical Systems, Inc. > > "Diagnostic Imaging Excellence Since 1989" > > NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY: > > 2164 Andrea Lane, Fort Myers, FL 33912 USA > > TEL: 941.454.9555 > > FAX: 941.454.9599 > > OUR EMAIL ADDRESSES: > > sales@IntegrityMed.com (Sales) > > parts@integritymed.com (Parts Sales) > > members@integritymed.com (Website Membership Inquiries) > > dfk@integritymed.com (To Sell Your Equipment, Don) > > sed@integritymed.com (Customer Service, Sheena) > > rjd@integritymed.com (Marketing, Rhonda) > > mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio) > > info@integritymed.com (General Inquiries) > > http://www.integritymed.com (WEB-SITE) > > > > You are subscribed to the DOTmed Service Issues Forum. > > You may either reply to this email or email directly to service@forums.dotmed.com > > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in. > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in. >
Sorry about it , I just do not know about it. ----- Original Message ----- From: To: Service Issues Forum Sent: Thursday, February 28, 2002 11:10 PM Subject: Re: services for autoanalyzer
> Dear Mr. Radjak, > > > > Please do not use the Service Issues Forum for this kind of issue. > > > > This topic should be discussed in the Honest & Dishonest Dealings Forum. > > > > The Service Issues Forum is designed for service engineers and users to ask service related questions. > > > > Please use the Service Issues Forum for that purpose. > > > > Thank you for your cooperation. > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in. >
----- Original Message ----- From: To: "Service Issues Forum" Sent: Thursday, February 28, 2002 7:11 PM Subject: Re: services for autoanalyzer
> Dear Rick., > > Just for your information, the Camtronics VP3 Digital system is not a digital > system at all, it is only a sophisticated cine loop. > > Bernie Glas > Dear Rick., > > Just for your information, the Camtronics VP3 > Digital system is not a digital system at all, it > is only a sophisticated cine loop. > > Bernie Glas > > > You are subscribed to the DOTmed Service Issues Forum. > You may either reply to this email or email directly to service@forums.dotmed.com > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
We supply high-quality refurbished and used imaging equipment and parts to hospitals, imaging centers, and brokers worldwide. We pay top dollar and offer installation, deinstallation, service, and transport. Se habla español info@medilabglobal.com
Oral Unal
services for autoanalyzer
February 12, 2002 04:02
1-Beckman Coulture Protein Array
2-Technicon RA-XT
3-OpeRA by Bayer
We need full information(technical document)repair and maintenance for these
Best regards
Necati Unal
elektromar@ixir.com
to rate and post a comment
Jirasak Sirichidyothin
Re: services for autoanalyzer
February 21, 2002 06:37
Dear Necati Unal
I had prepare service manual for Array 360 protein system
I don"t know you still need . Please let me know
Best regards
jirasak .s
to rate and post a comment
Boris Shapira
RE: services for autoanalyzer
February 21, 2002 10:25
I think that you did not intend to send this email to me.
Meditek
Boris
-----Original Message-----
From: jirasak99@hotmail.com [mailto:jirasak99@hotmail.com]
Sent: Thursday, February 21, 2002 6:25 AM
To: Service Issues Forum
Subject: Re: services for autoanalyzer
Dear Necati Unal
I had prepare service manual for Array 360 protein system
I don"t know you still need . Please let me know
Best regards
jirasak .s
You are subscribed to the DOTmed Service Issues Forum.
You may either reply to this email or email directly to
service@forums.dotmed.com
To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be
logged in.
to rate and post a comment
Pete Schliebner
RE: services for autoanalyzer
February 21, 2002 11:22
Please do not use "Reply" when responding to these forum e-mails. Your
reply gets sent to everyone in the forum!
Thank you
to rate and post a comment
Olga De La Paz
Re: services for autoanalyzer
February 21, 2002 10:55
SIR, THIS IS NOT MY MAIL TO YOU, I DON'T KNOW HOW I EVEN RECEIVED THIS
E-MAIL.
----- Original Message -----
From:
To: Service Issues Forum
Sent: Thursday, February 21, 2002 10:12 AM
Subject: RE: services for autoanalyzer
> I think that you did not intend to send this email to me.
>
> Meditek
> Boris
>
> -----Original Message-----
> From: jirasak99@hotmail.com [mailto:jirasak99@hotmail.com]
> Sent: Thursday, February 21, 2002 6:25 AM
> To: Service Issues Forum
> Subject: Re: services for autoanalyzer
>
>
> Dear Necati Unal
> I had prepare service manual for Array 360 protein system
> I don"t know you still need . Please let me know
> Best regards
> jirasak .s
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
> service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be
> logged in.
>
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
>
to rate and post a comment
David Harrington
RE: services for autoanalyzer
February 24, 2002 04:13
was not me
----Original Message Follows----
From: boris_shapira@yahoo.com
Reply-To: service@forums.dotmed.com
To: Service Issues Forum
Subject: RE: services for autoanalyzer
Date: Thu, 21 Feb 2002 10:12:08 -0500 (EST)
I think that you did not intend to send this email to me.
Meditek
Boris
-----Original Message-----
From: jirasak99@hotmail.com [mailto:jirasak99@hotmail.com]
Sent: Thursday, February 21, 2002 6:25 AM
To: Service Issues Forum
Subject: Re: services for autoanalyzer
Dear Necati Unal
I had prepare service manual for Array 360 protein system
I don"t know you still need . Please let me know
Best regards
jirasak .s
You are subscribed to the DOTmed Service Issues Forum.
You may either reply to this email or email directly to
service@forums.dotmed.com
To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be
logged in.
You are subscribed to the DOTmed Service Issues Forum.
You may either reply to this email or email directly to
service@forums.dotmed.com
To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be
logged in.
Read a good book at my book store.
Try IT, you'll like IT.
"www.itsbooks.iwonstores.com" All books, all the time.
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
to rate and post a comment
KERVANKIRAN
Re: services for autoanalyzer
February 24, 2002 05:00
to rate and post a comment
David Klayman
Re: services for autoanalyzer
February 27, 2002 10:40
Dear Sir,
Do you sell/service these intruments currently? Please let us know if you
are the Bayer distributor for your country. Thank you.
David Klayman
President
----- Original Message -----
From:
To: "Service Issues Forum"
Sent: Tuesday, February 12, 2002 3:49 AM
Subject: services for autoanalyzer
> 1-Beckman Coulture Protein Array
> 2-Technicon RA-XT
> 3-OpeRA by Bayer
>
> We need full information(technical document)repair and maintenance for
these
>
> Best regards
>
> Necati Unal
> elektromar@ixir.com
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/users/my/forums.html - You
must be logged in.
>
to rate and post a comment
Harpreet S Cheema
Re: services for autoanalyzer
February 27, 2002 11:22
We are a 100 bedded Multi Facility Hospital in India
H.S.Cheema
--- davidk@labworld1.com wrote:
> Dear Sir,
>
> Do you sell/service these intruments currently?
> Please let us know if you
> are the Bayer distributor for your country. Thank
> you.
>
> David Klayman
> President
> ----- Original Message -----
> From:
> To: "Service Issues Forum"
>
> Sent: Tuesday, February 12, 2002 3:49 AM
> Subject: services for autoanalyzer
>
>
> > 1-Beckman Coulture Protein Array
> > 2-Technicon RA-XT
> > 3-OpeRA by Bayer
> >
> > We need full information(technical document)repair
> and maintenance for
> these
> >
> > Best regards
> >
> > Necati Unal
> > elektromar@ixir.com
> >
> >
> > You are subscribed to the DOTmed Service Issues
> Forum.
> > You may either reply to this email or email
> directly to
> service@forums.dotmed.com
> > To Unsubscribe: go to
> https://www.dotmed.com/users/my/forums.html - You
> must be logged in.
> >
>
>
>
> You are subscribed to the DOTmed Service Issues
> Forum.
> You may either reply to this email or email directly
> to service@forums.dotmed.com
> To Unsubscribe: go to
> https://www.dotmed.com/forums/index.html - You must
> be logged in.
__________________________________________________
Do You Yahoo!?
Yahoo! Greetings - Send FREE e-cards for every occasion!
http://greetings.yahoo.com
to rate and post a comment
Dante Malvar
Re: services for autoanalyzer
February 27, 2002 11:50
there was a mistake sending this e mail to me. I don't deal with such.
to rate and post a comment
Robert Manetta
Re: services for autoanalyzer
February 27, 2002 12:14
no we do not sale or service this type on equipment.
Do you know of any one in India that can install and service Siemens Cath/
Angio systems
Rob Manetta
VP
----- Original Message -----
From:
To: "Service Issues Forum"
Sent: Wednesday, February 27, 2002 11:09 AM
Subject: Re: services for autoanalyzer
> We are a 100 bedded Multi Facility Hospital in India
> H.S.Cheema
>
>
> --- davidk@labworld1.com wrote:
> > Dear Sir,
> >
> > Do you sell/service these intruments currently?
> > Please let us know if you
> > are the Bayer distributor for your country. Thank
> > you.
> >
> > David Klayman
> > President
> > ----- Original Message -----
> > From:
> > To: "Service Issues Forum"
> >
> > Sent: Tuesday, February 12, 2002 3:49 AM
> > Subject: services for autoanalyzer
> >
> >
> > > 1-Beckman Coulture Protein Array
> > > 2-Technicon RA-XT
> > > 3-OpeRA by Bayer
> > >
> > > We need full information(technical document)repair
> > and maintenance for
> > these
> > >
> > > Best regards
> > >
> > > Necati Unal
> > > elektromar@ixir.com
> > >
> > >
> > > You are subscribed to the DOTmed Service Issues
> > Forum.
> > > You may either reply to this email or email
> > directly to
> > service@forums.dotmed.com
> > > To Unsubscribe: go to
> > https://www.dotmed.com/users/my/forums.html - You
> > must be logged in.
> > >
> >
> >
> >
> > You are subscribed to the DOTmed Service Issues
> > Forum.
> > You may either reply to this email or email directly
> > to service@forums.dotmed.com
> > To Unsubscribe: go to
> > https://www.dotmed.com/forums/index.html - You must
> > be logged in.
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Greetings - Send FREE e-cards for every occasion!
> http://greetings.yahoo.com
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
to rate and post a comment
Rick Staab
Re: services for autoanalyzer
February 27, 2002 12:20
Rob, I do not know of anyone to install or service them in India but I have
one that I aquired from a hospital very inexpensively. If you are
interested, I will send you the information you need and just make me an
offer because I want to turn it over. It was maintained by Siemens the whole
time.
Rick Staab, President
----- Original Message -----
From:
To: Service Issues Forum
Sent: Wednesday, February 27, 2002 12:01 PM
Subject: Re: services for autoanalyzer
> no we do not sale or service this type on equipment.
> Do you know of any one in India that can install and service Siemens Cath/
> Angio systems
>
> Rob Manetta
> VP
> ----- Original Message -----
> From:
> To: "Service Issues Forum"
> Sent: Wednesday, February 27, 2002 11:09 AM
> Subject: Re: services for autoanalyzer
>
>
> > We are a 100 bedded Multi Facility Hospital in India
> > H.S.Cheema
> >
> >
> > --- davidk@labworld1.com wrote:
> > > Dear Sir,
> > >
> > > Do you sell/service these intruments currently?
> > > Please let us know if you
> > > are the Bayer distributor for your country. Thank
> > > you.
> > >
> > > David Klayman
> > > President
> > > ----- Original Message -----
> > > From:
> > > To: "Service Issues Forum"
> > >
> > > Sent: Tuesday, February 12, 2002 3:49 AM
> > > Subject: services for autoanalyzer
> > >
> > >
> > > > 1-Beckman Coulture Protein Array
> > > > 2-Technicon RA-XT
> > > > 3-OpeRA by Bayer
> > > >
> > > > We need full information(technical document)repair
> > > and maintenance for
> > > these
> > > >
> > > > Best regards
> > > >
> > > > Necati Unal
> > > > elektromar@ixir.com
> > > >
> > > >
> > > > You are subscribed to the DOTmed Service Issues
> > > Forum.
> > > > You may either reply to this email or email
> > > directly to
> > > service@forums.dotmed.com
> > > > To Unsubscribe: go to
> > > https://www.dotmed.com/users/my/forums.html - You
> > > must be logged in.
> > > >
> > >
> > >
> > >
> > > You are subscribed to the DOTmed Service Issues
> > > Forum.
> > > You may either reply to this email or email directly
> > > to service@forums.dotmed.com
> > > To Unsubscribe: go to
> > > https://www.dotmed.com/forums/index.html - You must
> > > be logged in.
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Greetings - Send FREE e-cards for every occasion!
> > http://greetings.yahoo.com
> >
> >
> > You are subscribed to the DOTmed Service Issues Forum.
> > You may either reply to this email or email directly to
> service@forums.dotmed.com
> > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
> be logged in.
>
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
>
to rate and post a comment
Rick Staab
Re: services for autoanalyzer
February 27, 2002 12:27
Rob Manetta,
Siemens Corscop C?Polydoros 100, SN01215/01372, Camtronic VP3 Digital System
Corskop, C/XRE pedestal Table Sirecon
Triplex 11/7/5 Image Intensifier/Vidomed C. Video System/Videomatic Auto
Dose
Regulation for TV Flouroscopy/single plane Cine for Polydoros/polydoros
100HK-AA Ganerator for connection to two double focus tubes/Flouroscopic
Module/heat integrator PIIonomat DConnection/Cinarex Processor.
Make any offer.
Rick
----- Original Message -----
From:
To: Service Issues Forum
Sent: Wednesday, February 27, 2002 12:01 PM
Subject: Re: services for autoanalyzer
> no we do not sale or service this type on equipment.
> Do you know of any one in India that can install and service Siemens Cath/
> Angio systems
>
> Rob Manetta
> VP
> ----- Original Message -----
> From:
> To: "Service Issues Forum"
> Sent: Wednesday, February 27, 2002 11:09 AM
> Subject: Re: services for autoanalyzer
>
>
> > We are a 100 bedded Multi Facility Hospital in India
> > H.S.Cheema
> >
> >
> > --- davidk@labworld1.com wrote:
> > > Dear Sir,
> > >
> > > Do you sell/service these intruments currently?
> > > Please let us know if you
> > > are the Bayer distributor for your country. Thank
> > > you.
> > >
> > > David Klayman
> > > President
> > > ----- Original Message -----
> > > From:
> > > To: "Service Issues Forum"
> > >
> > > Sent: Tuesday, February 12, 2002 3:49 AM
> > > Subject: services for autoanalyzer
> > >
> > >
> > > > 1-Beckman Coulture Protein Array
> > > > 2-Technicon RA-XT
> > > > 3-OpeRA by Bayer
> > > >
> > > > We need full information(technical document)repair
> > > and maintenance for
> > > these
> > > >
> > > > Best regards
> > > >
> > > > Necati Unal
> > > > elektromar@ixir.com
> > > >
> > > >
> > > > You are subscribed to the DOTmed Service Issues
> > > Forum.
> > > > You may either reply to this email or email
> > > directly to
> > > service@forums.dotmed.com
> > > > To Unsubscribe: go to
> > > https://www.dotmed.com/users/my/forums.html - You
> > > must be logged in.
> > > >
> > >
> > >
> > >
> > > You are subscribed to the DOTmed Service Issues
> > > Forum.
> > > You may either reply to this email or email directly
> > > to service@forums.dotmed.com
> > > To Unsubscribe: go to
> > > https://www.dotmed.com/forums/index.html - You must
> > > be logged in.
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Greetings - Send FREE e-cards for every occasion!
> > http://greetings.yahoo.com
> >
> >
> > You are subscribed to the DOTmed Service Issues Forum.
> > You may either reply to this email or email directly to
> service@forums.dotmed.com
> > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
> be logged in.
>
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
>
to rate and post a comment
VENKATARAJU THIMAIAH
Re: services for autoanalyzer
February 27, 2002 12:41
dear rob manetta thanks for the email and i have people can instal service any siemens cath angio systems and if want any other information can send more information which you'r looking and i will get back to you.
thanks
venka
shyam usa
to rate and post a comment
David Denholtz
Re: Re: services for autoanalyzer
February 27, 2002 12:50
Dear Mr. Klayman,
Thank you for your email. I am sorry that we cannot help you with your requ=
est. We deal almost exclusively with Diagnostic Imaging equipment.
Please email us or check our website for more information: http://www.integ=
ritymed.com
Sincerely,
David B. Denholtz
>On 2/27/02 10:26:55 service@forums.dotmed.com wrote:
>
>Dear Sir,
>
>Do you sell/service these intruments currently? Please let us know if you
>are the Bayer distributor for your country. Thank you.
>
>David Klayman
>President
>----- Original Message -----
>From:
>To: "Service Issues Forum"
>Sent: Tuesday, February 12, 2002 3:49 AM
>Subject: services for autoanalyzer
>
>
>> 1-Beckman Coulture Protein Array
>> 2-Technicon RA-XT
>> 3-OpeRA by Bayer
>>
>> We need full information(technical document)repair and maintenance for
>these
>>
>> Best regards
>>
>> Necati Unal
>> elektromar@ixir.com
>>
>>
>> You are subscribed to the DOTmed Service Issues Forum.
>> You may either reply to this email or email directly to
>service@forums.dotmed.com
>> To Unsubscribe: go to https://www.dotmed.com/users/my/forums.html - You
>must be logged in.
>>
>
>
>
>You are subscribed to the DOTmed Service Issues Forum.
>You may either reply to this email or email directly to service@forums.dot=
med.com
>To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b=
e logged in.
>
oooooooooooooooooooooooooooooooooo
oooooooooooooooooooooooooooooooooo
Integrity Medical Systems, Inc.
"Diagnostic Imaging Excellence Since 1989"
NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY:
2164 Andrea Lane, Fort Myers, FL 33912 USA
TEL: 941.454.9555
FAX: 941.454.9599
OUR EMAIL ADDRESSES:
sales@IntegrityMed.com (Sales)
parts@integritymed.com (Parts Sales)
members@integritymed.com (Website Membership Inquiries)
dfk@integritymed.com (To Sell Your Equipment, Don)
sed@integritymed.com (Customer Service, Sheena)
rjd@integritymed.com (Marketing, Rhonda)
mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio)
info@integritymed.com (General Inquiries)
http://www.integritymed.com (WEB-SITE)
to rate and post a comment
David Denholtz
Re: Re: services for autoanalyzer
February 27, 2002 01:01
Rick,
How much for Coroskop?
Sincerely,
David B. Denholtz
>On 2/27/02 12:13:53 service@forums.dotmed.com wrote:
>
>Rob Manetta,
>Siemens Corscop C?Polydoros 100, SN01215/01372, Camtronic VP3 Digital Syst=
em
>Corskop, C/XRE pedestal Table Sirecon
>Triplex 11/7/5 Image Intensifier/Vidomed C. Video System/Videomatic Auto
>Dose
>Regulation for TV Flouroscopy/single plane Cine for Polydoros/polydoros
>100HK-AA Ganerator for connection to two double focus tubes/Flouroscopic
>Module/heat integrator PIIonomat DConnection/Cinarex Processor.
>
>Make any offer.
>Rick
>----- Original Message -----
>From:
>To: Service Issues Forum
>Sent: Wednesday, February 27, 2002 12:01 PM
>Subject: Re: services for autoanalyzer
>
>
>> no we do not sale or service this type on equipment.
>> Do you know of any one in India that can install and service Siemens Cat=
h/
>> Angio systems
>>
>> Rob Manetta
>> VP
>> ----- Original Message -----
>> From:
>> To: "Service Issues Forum"
>> Sent: Wednesday, February 27, 2002 11:09 AM
>> Subject: Re: services for autoanalyzer
>>
>>
>> > We are a 100 bedded Multi Facility Hospital in India
>> > H.S.Cheema
>> >
>> >
>> > --- davidk@labworld1.com wrote:
>> > > Dear Sir,
>> > >
>> > > Do you sell/service these intruments currently?
>> > > Please let us know if you
>> > > are the Bayer distributor for your country. Thank
>> > > you.
>> > >
>> > > David Klayman
>> > > President
>> > > ----- Original Message -----
>> > > From:
>> > > To: "Service Issues Forum"
>> > >
>> > > Sent: Tuesday, February 12, 2002 3:49 AM
>> > > Subject: services for autoanalyzer
>> > >
>> > >
>> > > > 1-Beckman Coulture Protein Array
>> > > > 2-Technicon RA-XT
>> > > > 3-OpeRA by Bayer
>> > > >
>> > > > We need full information(technical document)repair
>> > > and maintenance for
>> > > these
>> > > >
>> > > > Best regards
>> > > >
>> > > > Necati Unal
>> > > > elektromar@ixir.com
>> > > >
>> > > >
>> > > > You are subscribed to the DOTmed Service Issues
>> > > Forum.
>> > > > You may either reply to this email or email
>> > > directly to
>> > > service@forums.dotmed.com
>> > > > To Unsubscribe: go to
>> > > https://www.dotmed.com/users/my/forums.html - You
>> > > must be logged in.
>> > > >
>> > >
>> > >
>> > >
>> > > You are subscribed to the DOTmed Service Issues
>> > > Forum.
>> > > You may either reply to this email or email directly
>> > > to service@forums.dotmed.com
>> > > To Unsubscribe: go to
>> > > https://www.dotmed.com/forums/index.html - You must
>> > > be logged in.
>> >
>> >
>> > __________________________________________________
>> > Do You Yahoo!?
>> > Yahoo! Greetings - Send FREE e-cards for every occasion!
>> > http://greetings.yahoo.com
>> >
>> >
>> > You are subscribed to the DOTmed Service Issues Forum.
>> > You may either reply to this email or email directly to
>> service@forums.dotmed.com
>> > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You mu=
st
>> be logged in.
>>
>>
>>
>> You are subscribed to the DOTmed Service Issues Forum.
>> You may either reply to this email or email directly to
>service@forums.dotmed.com
>> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
>be logged in.
>>
>
>
>
>
>You are subscribed to the DOTmed Service Issues Forum.
>You may either reply to this email or email directly to service@forums.dot=
med.com
>To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b=
e logged in.
>
oooooooooooooooooooooooooooooooooo
oooooooooooooooooooooooooooooooooo
Integrity Medical Systems, Inc.
"Diagnostic Imaging Excellence Since 1989"
NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY:
2164 Andrea Lane, Fort Myers, FL 33912 USA
TEL: 941.454.9555
FAX: 941.454.9599
OUR EMAIL ADDRESSES:
sales@IntegrityMed.com (Sales)
parts@integritymed.com (Parts Sales)
members@integritymed.com (Website Membership Inquiries)
dfk@integritymed.com (To Sell Your Equipment, Don)
sed@integritymed.com (Customer Service, Sheena)
rjd@integritymed.com (Marketing, Rhonda)
mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio)
info@integritymed.com (General Inquiries)
http://www.integritymed.com (WEB-SITE)
to rate and post a comment
David Denholtz
Re: Re: services for autoanalyzer
February 27, 2002 01:01
Dear Venka,
I am interested as well. Please send information on installers.
Sincerely,
David B. Denholtz
oooooooooooooooooooooooooooooooooo
oooooooooooooooooooooooooooooooooo
Integrity Medical Systems, Inc.
"Diagnostic Imaging Excellence Since 1989"
CORPORATE OFFICE/REFURBISHING FACILITY:
2164 Andrea Lane, Fort Myers, FL 33912 USA
TOLL-FREE: 800-722-3646
TEL: 941.454.9555
FAX: 941.454.9599
OUR EMAIL ADDRESSES:
sales@IntegrityMed.com (Sales)
parts@integritymed.com (Parts Sales)
interims@integritymed.com (Interim Rentals)
members@integritymed.com (Website Membership Inquiries)
dfk@integritymed.com (To Sell Your Equipment, Don)
sed@integritymed.com (Client Services & Parts, Sheena)
rjd@integritymed.com (Accounts, Rhonda)
mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio)
ism@integritymed.com (Ismael, Warehouse Receiving)
poj@integritymed.com (Shipping, Peggy)
info@integritymed.com (General Inquiries)
entity@integritymed.com (Webmasters, Barry & Shane)
http://www.integritymed.com (WEB-SITE)
>On 2/27/02 12:27:54 service@forums.dotmed.com wrote:
>
>dear rob manetta thanks for the email and i have people can instal service=
any siemens cath angio systems and if want any other information can send =
more information which you'r looking and i will get back to you.
>
>thanks
>venka
>shyam usa
>
>
>You are subscribed to the DOTmed Service Issues Forum.
>You may either reply to this email or email directly to service@forums.dot=
med.com
>To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b=
e logged in.
>
oooooooooooooooooooooooooooooooooo
oooooooooooooooooooooooooooooooooo
Integrity Medical Systems, Inc.
"Diagnostic Imaging Excellence Since 1989"
NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY:
2164 Andrea Lane, Fort Myers, FL 33912 USA
TEL: 941.454.9555
FAX: 941.454.9599
OUR EMAIL ADDRESSES:
sales@IntegrityMed.com (Sales)
parts@integritymed.com (Parts Sales)
members@integritymed.com (Website Membership Inquiries)
dfk@integritymed.com (To Sell Your Equipment, Don)
sed@integritymed.com (Customer Service, Sheena)
rjd@integritymed.com (Marketing, Rhonda)
mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio)
info@integritymed.com (General Inquiries)
http://www.integritymed.com (WEB-SITE)
to rate and post a comment
David Denholtz
Re: Re: services for autoanalyzer
February 27, 2002 01:02
Dear Mr. H.S. Cheema,
Please let us know how we can help.
Since 1989 our quality refurbished equipment has been sold to buyers in 63 =
countries. Our website, updated daily, and our IN-STOCK inventory-- perhaps=
the largest in the USA-- includes CT, MRI, Ultrasound, X-Ray, Cath/Angio, =
Nuclear SPECT, Mammo, C-Arms, Linacs, and Bone Densitometers. Every piece =
of equipment we sell is 100% warrantied to meet or exceed manufacturer's sp=
ecifications before it leaves our testing and refurbishing facility.
Sincerely,
David B. Denholtz
>On 2/27/02 11:08:54 service@forums.dotmed.com wrote:
>
>We are a 100 bedded Multi Facility Hospital in India
>H.S.Cheema
>
>
>--- davidk@labworld1.com wrote:
>> Dear Sir,
>>
>> Do you sell/service these intruments currently?
>> Please let us know if you
>> are the Bayer distributor for your country. Thank
>> you.
>>
>> David Klayman
>> President
>> ----- Original Message -----
>> From:
>> To: "Service Issues Forum"
>>
>> Sent: Tuesday, February 12, 2002 3:49 AM
>> Subject: services for autoanalyzer
>>
>>
>> > 1-Beckman Coulture Protein Array
>> > 2-Technicon RA-XT
>> > 3-OpeRA by Bayer
>> >
>> > We need full information(technical document)repair
>> and maintenance for
>> these
>> >
>> > Best regards
>> >
>> > Necati Unal
>> > elektromar@ixir.com
>> >
>> >
>> > You are subscribed to the DOTmed Service Issues
>> Forum.
>> > You may either reply to this email or email
>> directly to
>> service@forums.dotmed.com
>> > To Unsubscribe: go to
>> https://www.dotmed.com/users/my/forums.html - You
>> must be logged in.
>> >
>>
>>
>>
>> You are subscribed to the DOTmed Service Issues
>> Forum.
>> You may either reply to this email or email directly
>> to service@forums.dotmed.com
>> To Unsubscribe: go to
>> https://www.dotmed.com/forums/index.html - You must
>> be logged in.
>
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! Greetings - Send FREE e-cards for every occasion!
>http://greetings.yahoo.com
>
>
>You are subscribed to the DOTmed Service Issues Forum.
>You may either reply to this email or email directly to service@forums.dot=
med.com
>To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b=
e logged in.
>
oooooooooooooooooooooooooooooooooo
oooooooooooooooooooooooooooooooooo
Integrity Medical Systems, Inc.
"Diagnostic Imaging Excellence Since 1989"
NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY:
2164 Andrea Lane, Fort Myers, FL 33912 USA
TEL: 941.454.9555
FAX: 941.454.9599
OUR EMAIL ADDRESSES:
sales@IntegrityMed.com (Sales)
parts@integritymed.com (Parts Sales)
members@integritymed.com (Website Membership Inquiries)
dfk@integritymed.com (To Sell Your Equipment, Don)
sed@integritymed.com (Customer Service, Sheena)
rjd@integritymed.com (Marketing, Rhonda)
mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio)
info@integritymed.com (General Inquiries)
http://www.integritymed.com (WEB-SITE)
to rate and post a comment
Customer Service At DOTmed.com
Re: Re: services for autoanalyzer
February 27, 2002 02:24
Dear Mr. Denholtz,
Please do not use the DOTmed Forums to promote your company or the services that you offer.
The Forums are not to be used for general advertisement but for specific Service Issues.
We have a number of inexpensive advertising options on DOTmed for as little as $10 per month. If you find our Forums useful, consider advertising.
Thank you for using DOTmed
to rate and post a comment
Robert Manetta
Re: services for autoanalyzer
February 27, 2002 01:11
ok send me all the specs'
Rob
----- Original Message -----
From:
To: "Service Issues Forum"
Sent: Wednesday, February 27, 2002 12:07 PM
Subject: Re: services for autoanalyzer
> Rob, I do not know of anyone to install or service them in India but I
have
> one that I aquired from a hospital very inexpensively. If you are
> interested, I will send you the information you need and just make me an
> offer because I want to turn it over. It was maintained by Siemens the
whole
> time.
>
> Rick Staab, President
> ----- Original Message -----
> From:
> To: Service Issues Forum
> Sent: Wednesday, February 27, 2002 12:01 PM
> Subject: Re: services for autoanalyzer
>
>
> > no we do not sale or service this type on equipment.
> > Do you know of any one in India that can install and service Siemens
Cath/
> > Angio systems
> >
> > Rob Manetta
> > VP
> > ----- Original Message -----
> > From:
> > To: "Service Issues Forum"
> > Sent: Wednesday, February 27, 2002 11:09 AM
> > Subject: Re: services for autoanalyzer
> >
> >
> > > We are a 100 bedded Multi Facility Hospital in India
> > > H.S.Cheema
> > >
> > >
> > > --- davidk@labworld1.com wrote:
> > > > Dear Sir,
> > > >
> > > > Do you sell/service these intruments currently?
> > > > Please let us know if you
> > > > are the Bayer distributor for your country. Thank
> > > > you.
> > > >
> > > > David Klayman
> > > > President
> > > > ----- Original Message -----
> > > > From:
> > > > To: "Service Issues Forum"
> > > >
> > > > Sent: Tuesday, February 12, 2002 3:49 AM
> > > > Subject: services for autoanalyzer
> > > >
> > > >
> > > > > 1-Beckman Coulture Protein Array
> > > > > 2-Technicon RA-XT
> > > > > 3-OpeRA by Bayer
> > > > >
> > > > > We need full information(technical document)repair
> > > > and maintenance for
> > > > these
> > > > >
> > > > > Best regards
> > > > >
> > > > > Necati Unal
> > > > > elektromar@ixir.com
> > > > >
> > > > >
> > > > > You are subscribed to the DOTmed Service Issues
> > > > Forum.
> > > > > You may either reply to this email or email
> > > > directly to
> > > > service@forums.dotmed.com
> > > > > To Unsubscribe: go to
> > > > https://www.dotmed.com/users/my/forums.html - You
> > > > must be logged in.
> > > > >
> > > >
> > > >
> > > >
> > > > You are subscribed to the DOTmed Service Issues
> > > > Forum.
> > > > You may either reply to this email or email directly
> > > > to service@forums.dotmed.com
> > > > To Unsubscribe: go to
> > > > https://www.dotmed.com/forums/index.html - You must
> > > > be logged in.
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Greetings - Send FREE e-cards for every occasion!
> > > http://greetings.yahoo.com
> > >
> > >
> > > You are subscribed to the DOTmed Service Issues Forum.
> > > You may either reply to this email or email directly to
> > service@forums.dotmed.com
> > > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You
must
> > be logged in.
> >
> >
> >
> > You are subscribed to the DOTmed Service Issues Forum.
> > You may either reply to this email or email directly to
> service@forums.dotmed.com
> > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
> be logged in.
> >
>
>
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
to rate and post a comment
Robert Manetta
Re: services for autoanalyzer
February 27, 2002 01:19
I have a Doctor that has Purchased some equipment from and is interested in
a Siemens cath lab but don't have any one to install or service it .
can you please forward the person name and contact information so I can send
it to my client
Thank you very much for your help.
Rob Manetta
---- Original Message -----
From:
To: "Service Issues Forum"
Sent: Wednesday, February 27, 2002 12:28 PM
Subject: Re: services for autoanalyzer
> dear rob manetta thanks for the email and i have people can instal service
any siemens cath angio systems and if want any other information can send
more information which you'r looking and i will get back to you.
>
> thanks
> venka
> shyam usa
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
to rate and post a comment
Rick Staab
Re: Re: services for autoanalyzer
February 27, 2002 02:09
David,
Make me an offer. It won't take much. I am familliar with you and your
company and would love to do some more business with you.
Rick
----- Original Message -----
From:
To: Service Issues Forum
Sent: Wednesday, February 27, 2002 12:47 PM
Subject: Re: Re: services for autoanalyzer
> Rick,
>
> How much for Coroskop?
>
> Sincerely,
> David B. Denholtz
>
>
> >On 2/27/02 12:13:53 service@forums.dotmed.com wrote:
> >
> >Rob Manetta,
> >Siemens Corscop C?Polydoros 100, SN01215/01372, Camtronic VP3 Digital
Syst=
> em
> >Corskop, C/XRE pedestal Table Sirecon
> >Triplex 11/7/5 Image Intensifier/Vidomed C. Video System/Videomatic Auto
> >Dose
> >Regulation for TV Flouroscopy/single plane Cine for Polydoros/polydoros
> >100HK-AA Ganerator for connection to two double focus tubes/Flouroscopic
> >Module/heat integrator PIIonomat DConnection/Cinarex Processor.
> >
> >Make any offer.
> >Rick
> >----- Original Message -----
> >From:
> >To: Service Issues Forum
> >Sent: Wednesday, February 27, 2002 12:01 PM
> >Subject: Re: services for autoanalyzer
> >
> >
> >> no we do not sale or service this type on equipment.
> >> Do you know of any one in India that can install and service Siemens
Cat=
> h/
> >> Angio systems
> >>
> >> Rob Manetta
> >> VP
> >> ----- Original Message -----
> >> From:
> >> To: "Service Issues Forum"
> >> Sent: Wednesday, February 27, 2002 11:09 AM
> >> Subject: Re: services for autoanalyzer
> >>
> >>
> >> > We are a 100 bedded Multi Facility Hospital in India
> >> > H.S.Cheema
> >> >
> >> >
> >> > --- davidk@labworld1.com wrote:
> >> > > Dear Sir,
> >> > >
> >> > > Do you sell/service these intruments currently?
> >> > > Please let us know if you
> >> > > are the Bayer distributor for your country. Thank
> >> > > you.
> >> > >
> >> > > David Klayman
> >> > > President
> >> > > ----- Original Message -----
> >> > > From:
> >> > > To: "Service Issues Forum"
> >> > >
> >> > > Sent: Tuesday, February 12, 2002 3:49 AM
> >> > > Subject: services for autoanalyzer
> >> > >
> >> > >
> >> > > > 1-Beckman Coulture Protein Array
> >> > > > 2-Technicon RA-XT
> >> > > > 3-OpeRA by Bayer
> >> > > >
> >> > > > We need full information(technical document)repair
> >> > > and maintenance for
> >> > > these
> >> > > >
> >> > > > Best regards
> >> > > >
> >> > > > Necati Unal
> >> > > > elektromar@ixir.com
> >> > > >
> >> > > >
> >> > > > You are subscribed to the DOTmed Service Issues
> >> > > Forum.
> >> > > > You may either reply to this email or email
> >> > > directly to
> >> > > service@forums.dotmed.com
> >> > > > To Unsubscribe: go to
> >> > > https://www.dotmed.com/users/my/forums.html - You
> >> > > must be logged in.
> >> > > >
> >> > >
> >> > >
> >> > >
> >> > > You are subscribed to the DOTmed Service Issues
> >> > > Forum.
> >> > > You may either reply to this email or email directly
> >> > > to service@forums.dotmed.com
> >> > > To Unsubscribe: go to
> >> > > https://www.dotmed.com/forums/index.html - You must
> >> > > be logged in.
> >> >
> >> >
> >> > __________________________________________________
> >> > Do You Yahoo!?
> >> > Yahoo! Greetings - Send FREE e-cards for every occasion!
> >> > http://greetings.yahoo.com
> >> >
> >> >
> >> > You are subscribed to the DOTmed Service Issues Forum.
> >> > You may either reply to this email or email directly to
> >> service@forums.dotmed.com
> >> > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You
mu=
> st
> >> be logged in.
> >>
> >>
> >>
> >> You are subscribed to the DOTmed Service Issues Forum.
> >> You may either reply to this email or email directly to
> >service@forums.dotmed.com
> >> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You
must
> >be logged in.
> >>
> >
> >
> >
> >
> >You are subscribed to the DOTmed Service Issues Forum.
> >You may either reply to this email or email directly to
service@forums.dot=
> med.com
> >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
b=
> e logged in.
> >
>
>
> oooooooooooooooooooooooooooooooooo
> oooooooooooooooooooooooooooooooooo
>
> Integrity Medical Systems, Inc.
> "Diagnostic Imaging Excellence Since 1989"
> NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY:
> 2164 Andrea Lane, Fort Myers, FL 33912 USA
> TEL: 941.454.9555
> FAX: 941.454.9599
> OUR EMAIL ADDRESSES:
> sales@IntegrityMed.com (Sales)
> parts@integritymed.com (Parts Sales)
> members@integritymed.com (Website Membership Inquiries)
> dfk@integritymed.com (To Sell Your Equipment, Don)
> sed@integritymed.com (Customer Service, Sheena)
> rjd@integritymed.com (Marketing, Rhonda)
> mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio)
> info@integritymed.com (General Inquiries)
> http://www.integritymed.com (WEB-SITE)
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
>
to rate and post a comment
Jeff Pakeltis
Re: Re: services for autoanalyzer
February 27, 2002 02:39
Mr Denholtz does not work for this company.
----- Original Message -----
From:
To: "Service Issues Forum"
Sent: Wednesday, February 27, 2002 2:10 PM
Subject: Re: Re: services for autoanalyzer
> Dear Mr. Denholtz,
>
> Please do not use the DOTmed Forums to promote your company or the services that you offer.
>
> The Forums are not to be used for general advertisement but for specific Service Issues.
>
> We have a number of inexpensive advertising options on DOTmed for as little as $10 per month. If you find our Forums
useful, consider advertising.
>
> Thank you for using DOTmed
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
to rate and post a comment
Don Bogutski
Re: services for autoanalyzer
February 27, 2002 03:40
Hey David:
What a magnificent job of marketing! However, you forgot to mention the
numerous lawsuits and judgements against you during the history of your
used medical equipment business. It could be that you are burdened by
clients and customers who are overly zealous towards litigation, so
David, do you care to be responsible to those within this open forum and
deal with those suits and judgements on a case by case basis?
As President of IAMERS, I have a personal knowledge of some of your
business activities. With your agreement, I will be glad to research
additional cases. We could just list them factually without comment so
that the readers of this forum can make their own decisions, or contact
you directly for an explanation. What do you think?
Don Bogutski
President
IAMERS
dbd@integritymed.com wrote:
>
> Dear Mr. H.S. Cheema,
>
> Please let us know how we can help.
>
> Since 1989 our quality refurbished equipment has been sold to buyers in 63 =
> countries. Our website, updated daily, and our IN-STOCK inventory-- perhaps=
> the largest in the USA-- includes CT, MRI, Ultrasound, X-Ray, Cath/Angio, =
> Nuclear SPECT, Mammo, C-Arms, Linacs, and Bone Densitometers. Every piece =
> of equipment we sell is 100% warrantied to meet or exceed manufacturer's sp=
> ecifications before it leaves our testing and refurbishing facility.
>
> Sincerely,
> David B. Denholtz
>
> >On 2/27/02 11:08:54 service@forums.dotmed.com wrote:
> >
> >We are a 100 bedded Multi Facility Hospital in India
> >H.S.Cheema
> >
> >
> >--- davidk@labworld1.com wrote:
> >> Dear Sir,
> >>
> >> Do you sell/service these intruments currently?
> >> Please let us know if you
> >> are the Bayer distributor for your country. Thank
> >> you.
> >>
> >> David Klayman
> >> President
> >> ----- Original Message -----
> >> From:
> >> To: "Service Issues Forum"
> >>
> >> Sent: Tuesday, February 12, 2002 3:49 AM
> >> Subject: services for autoanalyzer
> >>
> >>
> >> > 1-Beckman Coulture Protein Array
> >> > 2-Technicon RA-XT
> >> > 3-OpeRA by Bayer
> >> >
> >> > We need full information(technical document)repair
> >> and maintenance for
> >> these
> >> >
> >> > Best regards
> >> >
> >> > Necati Unal
> >> > elektromar@ixir.com
> >> >
> >> >
> >> > You are subscribed to the DOTmed Service Issues
> >> Forum.
> >> > You may either reply to this email or email
> >> directly to
> >> service@forums.dotmed.com
> >> > To Unsubscribe: go to
> >> https://www.dotmed.com/users/my/forums.html - You
> >> must be logged in.
> >> >
> >>
> >>
> >>
> >> You are subscribed to the DOTmed Service Issues
> >> Forum.
> >> You may either reply to this email or email directly
> >> to service@forums.dotmed.com
> >> To Unsubscribe: go to
> >> https://www.dotmed.com/forums/index.html - You must
> >> be logged in.
> >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Yahoo! Greetings - Send FREE e-cards for every occasion!
> >http://greetings.yahoo.com
> >
> >
> >You are subscribed to the DOTmed Service Issues Forum.
> >You may either reply to this email or email directly to service@forums.dot=
> med.com
> >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b=
> e logged in.
> >
>
> oooooooooooooooooooooooooooooooooo
> oooooooooooooooooooooooooooooooooo
>
> Integrity Medical Systems, Inc.
> "Diagnostic Imaging Excellence Since 1989"
> NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY:
> 2164 Andrea Lane, Fort Myers, FL 33912 USA
> TEL: 941.454.9555
> FAX: 941.454.9599
> OUR EMAIL ADDRESSES:
> sales@IntegrityMed.com (Sales)
> parts@integritymed.com (Parts Sales)
> members@integritymed.com (Website Membership Inquiries)
> dfk@integritymed.com (To Sell Your Equipment, Don)
> sed@integritymed.com (Customer Service, Sheena)
> rjd@integritymed.com (Marketing, Rhonda)
> mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio)
> info@integritymed.com (General Inquiries)
> http://www.integritymed.com (WEB-SITE)
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
to rate and post a comment
Don Bogutski
Re: services for autoanalyzer
February 27, 2002 03:40
Hey David:
What a magnificent job of marketing! However, you forgot to mention the
numerous lawsuits and judgements against you during the history of your
used medical equipment business. It could be that you are burdened by
clients and customers who are overly zealous towards litigation, so
David, do you care to be responsible to those within this open forum and
deal with those suits and judgements on a case by case basis?
As President of IAMERS, I have a personal knowledge of some of your
business activities. With your agreement, I will be glad to research
additional cases. We could just list them factually without comment so
that the readers of this forum can make their own decisions, or contact
you directly for an explanation. What do you think?
Don Bogutski
President
IAMERS
dbd@integritymed.com wrote:
>
> Dear Mr. H.S. Cheema,
>
> Please let us know how we can help.
>
> Since 1989 our quality refurbished equipment has been sold to buyers in 63 =
> countries. Our website, updated daily, and our IN-STOCK inventory-- perhaps=
> the largest in the USA-- includes CT, MRI, Ultrasound, X-Ray, Cath/Angio, =
> Nuclear SPECT, Mammo, C-Arms, Linacs, and Bone Densitometers. Every piece =
> of equipment we sell is 100% warrantied to meet or exceed manufacturer's sp=
> ecifications before it leaves our testing and refurbishing facility.
>
> Sincerely,
> David B. Denholtz
>
> >On 2/27/02 11:08:54 service@forums.dotmed.com wrote:
> >
> >We are a 100 bedded Multi Facility Hospital in India
> >H.S.Cheema
> >
> >
> >--- davidk@labworld1.com wrote:
> >> Dear Sir,
> >>
> >> Do you sell/service these intruments currently?
> >> Please let us know if you
> >> are the Bayer distributor for your country. Thank
> >> you.
> >>
> >> David Klayman
> >> President
> >> ----- Original Message -----
> >> From:
> >> To: "Service Issues Forum"
> >>
> >> Sent: Tuesday, February 12, 2002 3:49 AM
> >> Subject: services for autoanalyzer
> >>
> >>
> >> > 1-Beckman Coulture Protein Array
> >> > 2-Technicon RA-XT
> >> > 3-OpeRA by Bayer
> >> >
> >> > We need full information(technical document)repair
> >> and maintenance for
> >> these
> >> >
> >> > Best regards
> >> >
> >> > Necati Unal
> >> > elektromar@ixir.com
> >> >
> >> >
> >> > You are subscribed to the DOTmed Service Issues
> >> Forum.
> >> > You may either reply to this email or email
> >> directly to
> >> service@forums.dotmed.com
> >> > To Unsubscribe: go to
> >> https://www.dotmed.com/users/my/forums.html - You
> >> must be logged in.
> >> >
> >>
> >>
> >>
> >> You are subscribed to the DOTmed Service Issues
> >> Forum.
> >> You may either reply to this email or email directly
> >> to service@forums.dotmed.com
> >> To Unsubscribe: go to
> >> https://www.dotmed.com/forums/index.html - You must
> >> be logged in.
> >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Yahoo! Greetings - Send FREE e-cards for every occasion!
> >http://greetings.yahoo.com
> >
> >
> >You are subscribed to the DOTmed Service Issues Forum.
> >You may either reply to this email or email directly to service@forums.dot=
> med.com
> >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must b=
> e logged in.
> >
>
> oooooooooooooooooooooooooooooooooo
> oooooooooooooooooooooooooooooooooo
>
> Integrity Medical Systems, Inc.
> "Diagnostic Imaging Excellence Since 1989"
> NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY:
> 2164 Andrea Lane, Fort Myers, FL 33912 USA
> TEL: 941.454.9555
> FAX: 941.454.9599
> OUR EMAIL ADDRESSES:
> sales@IntegrityMed.com (Sales)
> parts@integritymed.com (Parts Sales)
> members@integritymed.com (Website Membership Inquiries)
> dfk@integritymed.com (To Sell Your Equipment, Don)
> sed@integritymed.com (Customer Service, Sheena)
> rjd@integritymed.com (Marketing, Rhonda)
> mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio)
> info@integritymed.com (General Inquiries)
> http://www.integritymed.com (WEB-SITE)
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must be logged in.
to rate and post a comment
Abdul Radjak
Re: services for autoanalyzer
February 27, 2002 07:37
There is also another crook to watch , he is Michael Abboud , Monarch
Medical of Staten Island , N.Y.
----- Original Message -----
From:
To: Service Issues Forum
Sent: Thursday, February 28, 2002 3:27 AM
Subject: Re: services for autoanalyzer
> Hey David:
>
> What a magnificent job of marketing! However, you forgot to mention the
> numerous lawsuits and judgements against you during the history of your
> used medical equipment business. It could be that you are burdened by
> clients and customers who are overly zealous towards litigation, so
> David, do you care to be responsible to those within this open forum and
> deal with those suits and judgements on a case by case basis?
>
> As President of IAMERS, I have a personal knowledge of some of your
> business activities. With your agreement, I will be glad to research
> additional cases. We could just list them factually without comment so
> that the readers of this forum can make their own decisions, or contact
> you directly for an explanation. What do you think?
>
> Don Bogutski
> President
> IAMERS
>
> dbd@integritymed.com wrote:
> >
> > Dear Mr. H.S. Cheema,
> >
> > Please let us know how we can help.
> >
> > Since 1989 our quality refurbished equipment has been sold to buyers in
63 =
> > countries. Our website, updated daily, and our IN-STOCK inventory--
perhaps=
> > the largest in the USA-- includes CT, MRI, Ultrasound, X-Ray,
Cath/Angio, =
> > Nuclear SPECT, Mammo, C-Arms, Linacs, and Bone Densitometers. Every
piece =
> > of equipment we sell is 100% warrantied to meet or exceed manufacturer's
sp=
> > ecifications before it leaves our testing and refurbishing facility.
> >
> > Sincerely,
> > David B. Denholtz
> >
> > >On 2/27/02 11:08:54 service@forums.dotmed.com wrote:
> > >
> > >We are a 100 bedded Multi Facility Hospital in India
> > >H.S.Cheema
> > >
> > >
> > >--- davidk@labworld1.com wrote:
> > >> Dear Sir,
> > >>
> > >> Do you sell/service these intruments currently?
> > >> Please let us know if you
> > >> are the Bayer distributor for your country. Thank
> > >> you.
> > >>
> > >> David Klayman
> > >> President
> > >> ----- Original Message -----
> > >> From:
> > >> To: "Service Issues Forum"
> > >>
> > >> Sent: Tuesday, February 12, 2002 3:49 AM
> > >> Subject: services for autoanalyzer
> > >>
> > >>
> > >> > 1-Beckman Coulture Protein Array
> > >> > 2-Technicon RA-XT
> > >> > 3-OpeRA by Bayer
> > >> >
> > >> > We need full information(technical document)repair
> > >> and maintenance for
> > >> these
> > >> >
> > >> > Best regards
> > >> >
> > >> > Necati Unal
> > >> > elektromar@ixir.com
> > >> >
> > >> >
> > >> > You are subscribed to the DOTmed Service Issues
> > >> Forum.
> > >> > You may either reply to this email or email
> > >> directly to
> > >> service@forums.dotmed.com
> > >> > To Unsubscribe: go to
> > >> https://www.dotmed.com/users/my/forums.html - You
> > >> must be logged in.
> > >> >
> > >>
> > >>
> > >>
> > >> You are subscribed to the DOTmed Service Issues
> > >> Forum.
> > >> You may either reply to this email or email directly
> > >> to service@forums.dotmed.com
> > >> To Unsubscribe: go to
> > >> https://www.dotmed.com/forums/index.html - You must
> > >> be logged in.
> > >
> > >
> > >__________________________________________________
> > >Do You Yahoo!?
> > >Yahoo! Greetings - Send FREE e-cards for every occasion!
> > >http://greetings.yahoo.com
> > >
> > >
> > >You are subscribed to the DOTmed Service Issues Forum.
> > >You may either reply to this email or email directly to
service@forums.dot=
> > med.com
> > >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You
must b=
> > e logged in.
> > >
> >
> > oooooooooooooooooooooooooooooooooo
> > oooooooooooooooooooooooooooooooooo
> >
> > Integrity Medical Systems, Inc.
> > "Diagnostic Imaging Excellence Since 1989"
> > NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY:
> > 2164 Andrea Lane, Fort Myers, FL 33912 USA
> > TEL: 941.454.9555
> > FAX: 941.454.9599
> > OUR EMAIL ADDRESSES:
> > sales@IntegrityMed.com (Sales)
> > parts@integritymed.com (Parts Sales)
> > members@integritymed.com (Website Membership Inquiries)
> > dfk@integritymed.com (To Sell Your Equipment, Don)
> > sed@integritymed.com (Customer Service, Sheena)
> > rjd@integritymed.com (Marketing, Rhonda)
> > mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio)
> > info@integritymed.com (General Inquiries)
> > http://www.integritymed.com (WEB-SITE)
> >
> > You are subscribed to the DOTmed Service Issues Forum.
> > You may either reply to this email or email directly to
service@forums.dotmed.com
> > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
>
to rate and post a comment
Bernard Glas
Re: services for autoanalyzer
February 28, 2002 08:54
Dear Rick.,
Just for your information, the Camtronics VP3 Digital system is not a digital
system at all, it is only a sophisticated cine loop.
Bernie Glas
Dear Rick.,
Just for your information, the Camtronics VP3
Digital system is not a digital system at all, it
is only a sophisticated cine loop.
Bernie Glas
to rate and post a comment
david parten
Re: services for autoanalyzer
February 28, 2002 09:06
no
David Parten
VP/Sales Manager
PPX Imaging, Inc.
davidparten@ppximaging.com
----- Original Message -----
From:
To: "Service Issues Forum"
Sent: Wednesday, February 27, 2002 9:27 AM
Subject: Re: services for autoanalyzer
> Dear Sir,
>
> Do you sell/service these intruments currently? Please let us know if you
> are the Bayer distributor for your country. Thank you.
>
> David Klayman
> President
> ----- Original Message -----
> From:
> To: "Service Issues Forum"
> Sent: Tuesday, February 12, 2002 3:49 AM
> Subject: services for autoanalyzer
>
>
> > 1-Beckman Coulture Protein Array
> > 2-Technicon RA-XT
> > 3-OpeRA by Bayer
> >
> > We need full information(technical document)repair and maintenance for
> these
> >
> > Best regards
> >
> > Necati Unal
> > elektromar@ixir.com
> >
> >
> > You are subscribed to the DOTmed Service Issues Forum.
> > You may either reply to this email or email directly to
> service@forums.dotmed.com
> > To Unsubscribe: go to https://www.dotmed.com/users/my/forums.html - You
> must be logged in.
> >
>
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
to rate and post a comment
Abdul Radjak
Re: services for autoanalyzer
February 28, 2002 10:05
Mr.Don Bogutski
President - IAMERS
Dear Mr.Bogutski ,
Please add to your list another crook Michael Abboud , Monarch Medical of
Staten Island , N.Y. who also has taken our hospital money , selling a CT
which never belongs to him.We have tried to settle the problem peacerfully
but to no avail. The used equipments business
has been so helpful especially in time of economic difficulties,We have to
get rid of those irresponsible guys.
DR.Abdul Radjak.
M.H.Thamrin Hospital ,
Jakarta - Indonesia.
----- Original Message -----
From:
To: Service Issues Forum
Sent: Thursday, February 28, 2002 3:27 AM
Subject: Re: services for autoanalyzer
> Hey David:
>
> What a magnificent job of marketing! However, you forgot to mention the
> numerous lawsuits and judgements against you during the history of your
> used medical equipment business. It could be that you are burdened by
> clients and customers who are overly zealous towards litigation, so
> David, do you care to be responsible to those within this open forum and
> deal with those suits and judgements on a case by case basis?
>
> As President of IAMERS, I have a personal knowledge of some of your
> business activities. With your agreement, I will be glad to research
> additional cases. We could just list them factually without comment so
> that the readers of this forum can make their own decisions, or contact
> you directly for an explanation. What do you think?
>
> Don Bogutski
> President
> IAMERS
>
> dbd@integritymed.com wrote:
> >
> > Dear Mr. H.S. Cheema,
> >
> > Please let us know how we can help.
> >
> > Since 1989 our quality refurbished equipment has been sold to buyers in
63 =
> > countries. Our website, updated daily, and our IN-STOCK inventory--
perhaps=
> > the largest in the USA-- includes CT, MRI, Ultrasound, X-Ray,
Cath/Angio, =
> > Nuclear SPECT, Mammo, C-Arms, Linacs, and Bone Densitometers. Every
piece =
> > of equipment we sell is 100% warrantied to meet or exceed manufacturer's
sp=
> > ecifications before it leaves our testing and refurbishing facility.
> >
> > Sincerely,
> > David B. Denholtz
> >
> > >On 2/27/02 11:08:54 service@forums.dotmed.com wrote:
> > >
> > >We are a 100 bedded Multi Facility Hospital in India
> > >H.S.Cheema
> > >
> > >
> > >--- davidk@labworld1.com wrote:
> > >> Dear Sir,
> > >>
> > >> Do you sell/service these intruments currently?
> > >> Please let us know if you
> > >> are the Bayer distributor for your country. Thank
> > >> you.
> > >>
> > >> David Klayman
> > >> President
> > >> ----- Original Message -----
> > >> From:
> > >> To: "Service Issues Forum"
> > >>
> > >> Sent: Tuesday, February 12, 2002 3:49 AM
> > >> Subject: services for autoanalyzer
> > >>
> > >>
> > >> > 1-Beckman Coulture Protein Array
> > >> > 2-Technicon RA-XT
> > >> > 3-OpeRA by Bayer
> > >> >
> > >> > We need full information(technical document)repair
> > >> and maintenance for
> > >> these
> > >> >
> > >> > Best regards
> > >> >
> > >> > Necati Unal
> > >> > elektromar@ixir.com
> > >> >
> > >> >
> > >> > You are subscribed to the DOTmed Service Issues
> > >> Forum.
> > >> > You may either reply to this email or email
> > >> directly to
> > >> service@forums.dotmed.com
> > >> > To Unsubscribe: go to
> > >> https://www.dotmed.com/users/my/forums.html - You
> > >> must be logged in.
> > >> >
> > >>
> > >>
> > >>
> > >> You are subscribed to the DOTmed Service Issues
> > >> Forum.
> > >> You may either reply to this email or email directly
> > >> to service@forums.dotmed.com
> > >> To Unsubscribe: go to
> > >> https://www.dotmed.com/forums/index.html - You must
> > >> be logged in.
> > >
> > >
> > >__________________________________________________
> > >Do You Yahoo!?
> > >Yahoo! Greetings - Send FREE e-cards for every occasion!
> > >http://greetings.yahoo.com
> > >
> > >
> > >You are subscribed to the DOTmed Service Issues Forum.
> > >You may either reply to this email or email directly to
service@forums.dot=
> > med.com
> > >To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You
must b=
> > e logged in.
> > >
> >
> > oooooooooooooooooooooooooooooooooo
> > oooooooooooooooooooooooooooooooooo
> >
> > Integrity Medical Systems, Inc.
> > "Diagnostic Imaging Excellence Since 1989"
> > NEW EXPANDED CORPORATE OFFICE/REFURBISHING FACILITY:
> > 2164 Andrea Lane, Fort Myers, FL 33912 USA
> > TEL: 941.454.9555
> > FAX: 941.454.9599
> > OUR EMAIL ADDRESSES:
> > sales@IntegrityMed.com (Sales)
> > parts@integritymed.com (Parts Sales)
> > members@integritymed.com (Website Membership Inquiries)
> > dfk@integritymed.com (To Sell Your Equipment, Don)
> > sed@integritymed.com (Customer Service, Sheena)
> > rjd@integritymed.com (Marketing, Rhonda)
> > mlc@integritymed.com (En Espa=F1ol o Portugues, Marcio)
> > info@integritymed.com (General Inquiries)
> > http://www.integritymed.com (WEB-SITE)
> >
> > You are subscribed to the DOTmed Service Issues Forum.
> > You may either reply to this email or email directly to
service@forums.dotmed.com
> > To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
>
to rate and post a comment
Customer Service At DOTmed.com
Re: services for autoanalyzer
February 28, 2002 11:23
Dear Mr. Radjak,
Please do not use the Service Issues Forum for this kind of issue.
This topic should be discussed in the Honest & Dishonest Dealings Forum.
The Service Issues Forum is designed for service engineers and users to ask service related questions.
Please use the Service Issues Forum for that purpose.
Thank you for your cooperation.
to rate and post a comment
Abdul Radjak
Re: services for autoanalyzer
February 28, 2002 06:23
Sorry about it , I just do not know about it.
----- Original Message -----
From:
To: Service Issues Forum
Sent: Thursday, February 28, 2002 11:10 PM
Subject: Re: services for autoanalyzer
> Dear Mr. Radjak,
>
>
>
> Please do not use the Service Issues Forum for this kind of issue.
>
>
>
> This topic should be discussed in the Honest & Dishonest Dealings Forum.
>
>
>
> The Service Issues Forum is designed for service engineers and users to
ask service related questions.
>
>
>
> Please use the Service Issues Forum for that purpose.
>
>
>
> Thank you for your cooperation.
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
>
to rate and post a comment
GPrithvi Raj Reddy
Re: services for autoanalyzer
March 03, 2002 02:22
stop sending me these mails
----- Original Message -----
From:
To: "Service Issues Forum"
Sent: Thursday, February 28, 2002 7:11 PM
Subject: Re: services for autoanalyzer
> Dear Rick.,
>
> Just for your information, the Camtronics VP3 Digital system is not a
digital
> system at all, it is only a sophisticated cine loop.
>
> Bernie Glas
> Dear Rick.,
>
> Just for your information, the Camtronics VP3
> Digital system is not a digital system at all, it
> is only a sophisticated cine loop.
>
> Bernie Glas
>
>
> You are subscribed to the DOTmed Service Issues Forum.
> You may either reply to this email or email directly to
service@forums.dotmed.com
> To Unsubscribe: go to https://www.dotmed.com/forums/index.html - You must
be logged in.
to rate and post a comment