I have been fighting to locate the cause of a Siemens Polydorous SX 80 Error 715/080 error. The error means -KV fault. I have tested the Xray tube, tested the system with new High tension Cables and have replaced the HVG tank. I have also replaced the D100 and D220 boards. Can any please help me. The problem only occurs around >90KVP and >50MAS.
some times the main fault comes from tube RX, do you can replace this?
some times the fault tube also replace D220 but not all cases, first check the tube, open the windows and see inside
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
MedicalTao
Siemens Polydorous 715/080 error
March 27, 2019 10:03
I have been fighting to locate the cause of a Siemens Polydorous SX 80 Error 715/080 error. The error means -KV fault. I have tested the Xray tube, tested the system with new High tension Cables and have replaced the HVG tank. I have also replaced the D100 and D220 boards. Can any please help me. The problem only occurs around >90KVP and >50MAS.
to rate and post a comment
Tibor Ivanszky
re: Siemens Polydorous 715/080 error
March 28, 2019 09:29
I need your email in order to help
tibor@ivanszky.com
to rate and post a comment
Germni
re: Siemens Polydorous 715/080 error
March 28, 2019 09:29
some times the main fault comes from tube RX, do you can replace this?
some times the fault tube also replace D220 but not all cases, first check the tube, open the windows and see inside
to rate and post a comment