My question is : this version is conpatible to equipment working? because i dont have computer , i need insert this software in one computer and make test ... its correctly ? if you warranty this software working to me its ok , but my question is case dont working ???
We need to know the following:
1. The SN of the black phantom SN( It is on the bottom, a 5 digits number, the last must be 6,7 or 8)
2. The scan table length 180 or 240,
3. The version. In case that the version is erlier than 4.7e you also need the tools diskete to update the firmware.
4. Options like APspine, femur, Lateral Spine etc.
5. The S/N. The scan table S/N is ALLWAYS deferent from the software S/N but all the documentation refers to software S/N.
We warranty 100% that the system will work properly under the following coditions:
1. P/C with the correct comm2 port
2.MSDOS 6.0 or newer or Windows 95, 98, 98SE
We can preper a P/C for you with windows 95 (original). We will also test it. In that case the shipment cost will be much higher.
We need to know the following:
1. The SN of the black phantom SN( It is on the bottom, a 5 digits number, the last must be 6,7 or 8)
2. The scan table length 180 or 240,
3. The version. In case that the version is erlier than 4.7e you also need the tools diskete to update the firmware.
4. Options like APspine, femur, Lateral Spine etc.
5. The S/N. The scan table S/N is ALLWAYS deferent from the software S/N but all the documentation refers to software S/N.
We warranty 100% that the system will work properly under the following coditions:
1. P/C with the correct comm2 port
2.MSDOS 6.0 or newer or Windows 95, 98, 98SE
We can preper a P/C for you with windows 95 (original). We will also test it. In that case the shipment cost will be much higher.
Daniel, We service these systems in Tampa. When I have computer problems (usually hard drive) I replace the hard drive with a ghosted copy of another systems drive. I then reinstall the software that came with the system. The software can be ordered from Lunar if you dont have it. All you need is the Lunar system ID (I.E. DQW7132). Lunar Charges about $1,200.00. The software will come in with whatever features were paid for by the original customer. When you load the software it will give you scan options femur, forearm, AP Spine, Etc. You first need a computer with 2 serial communications ports and a Pentium-II CPU. The hard drive needs to be 2-8GB with Windows 95 or 98 installed on it. I always put a second drive in my systems with a ghosted copy of everything on the second drive. If the hard drive crashes you just swap slave to master and restore their patient files from Zip disk backup. My number in FL. is 1-800-FIX-XRAY. Call me if I can help further! Good Luck!
Deon
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Daniel Pereira
Software Back up Lunar IQ
June 25, 2007 11:44
I need software back up Lunar IQ S/N 4343
to rate and post a comment
ALEXANDER PILAFTSIS
Re: Software Back up Lunar IQ
June 26, 2007 04:26
We can send you the full directory LUNAR for the version 4.7e.
Are you intrested?
Regards,
Alexander Pilaftsis
ALFATECH
to rate and post a comment
Daniel Pereira
Re: Software Back up Lunar IQ
June 26, 2007 03:00
My question is : this version is conpatible to equipment working? because i dont have computer , i need insert this software in one computer and make test ... its correctly ? if you warranty this software working to me its ok , but my question is case dont working ???
Thanks
to rate and post a comment
German Filgueira
Re: Software Back up Lunar IQ
June 26, 2007 07:05
hi daniel,
if you want the software send me an e-mail.
german@poderinc.com
to rate and post a comment
ALEXANDER PILAFTSIS
Re: Software Back up Lunar IQ
June 27, 2007 04:00
We need to know the following:
1. The SN of the black phantom SN( It is on the bottom, a 5 digits number, the last must be 6,7 or 8)
2. The scan table length 180 or 240,
3. The version. In case that the version is erlier than 4.7e you also need the tools diskete to update the firmware.
4. Options like APspine, femur, Lateral Spine etc.
5. The S/N. The scan table S/N is ALLWAYS deferent from the software S/N but all the documentation refers to software S/N.
We warranty 100% that the system will work properly under the following coditions:
1. P/C with the correct comm2 port
2.MSDOS 6.0 or newer or Windows 95, 98, 98SE
We can preper a P/C for you with windows 95 (original). We will also test it. In that case the shipment cost will be much higher.
Regards,
Alexander Pilaftsis
to rate and post a comment
Julian Aguilera
re: Re: Software Back up Lunar IQ
June 18, 2014 03:42
Hi Alexander, I looking for Lunar DPX-IQ 180(short table), language and system disk 4.7e. year 1998.Do yo Have? venexray@ hotmail.com
to rate and post a comment
ALEXANDER PILAFTSIS
re: re: Re: Software Back up Lunar IQ
June 21, 2014 07:44
Yes but I need and all the other details that I have asked from the others. Pls email me
to rate and post a comment
ALEXANDER PILAFTSIS
Re: Software Back up Lunar IQ
June 27, 2007 12:53
We need to know the following:
1. The SN of the black phantom SN( It is on the bottom, a 5 digits number, the last must be 6,7 or 8)
2. The scan table length 180 or 240,
3. The version. In case that the version is erlier than 4.7e you also need the tools diskete to update the firmware.
4. Options like APspine, femur, Lateral Spine etc.
5. The S/N. The scan table S/N is ALLWAYS deferent from the software S/N but all the documentation refers to software S/N.
We warranty 100% that the system will work properly under the following coditions:
1. P/C with the correct comm2 port
2.MSDOS 6.0 or newer or Windows 95, 98, 98SE
We can preper a P/C for you with windows 95 (original). We will also test it. In that case the shipment cost will be much higher.
Regards,
Alexander Pilaftsis
to rate and post a comment
Daniel Pereira
Re: Software Back up Lunar IQ
June 26, 2007 03:02
The eng. Ge in Brazil talk me that the S/N of densitometer is same of software ..is correctly ?
Thanks
Daniel Pereira
to rate and post a comment
Deon Armes
Re: Software Back up Lunar IQ
June 28, 2007 06:57
Daniel, We service these systems in Tampa. When I have computer problems (usually hard drive) I replace the hard drive with a ghosted copy of another systems drive. I then reinstall the software that came with the system. The software can be ordered from Lunar if you dont have it. All you need is the Lunar system ID (I.E. DQW7132). Lunar Charges about $1,200.00. The software will come in with whatever features were paid for by the original customer. When you load the software it will give you scan options femur, forearm, AP Spine, Etc. You first need a computer with 2 serial communications ports and a Pentium-II CPU. The hard drive needs to be 2-8GB with Windows 95 or 98 installed on it. I always put a second drive in my systems with a ghosted copy of everything on the second drive. If the hard drive crashes you just swap slave to master and restore their patient files from Zip disk backup. My number in FL. is 1-800-FIX-XRAY. Call me if I can help further! Good Luck!
Deon
to rate and post a comment
GHUFRAN Ullah
re: Re: Software Back up Lunar IQ
June 23, 2014 10:04
I need Valley Lab Force 300 (Diathermy) service manual.please some one help me and send to my email address:ghufranjani@gmail.com
to rate and post a comment