Ampronix, a Top Master Distributor for Sony Medical, provides Sales, Service & Exchanges for Sony Surgical Displays, Printers, & More. Rely on Us for Expert Support Tailored to Your Needs. Email info@ampronix.com or Call 949-273-8000 for Premier Pricing.
Ramil Cortes
sonoace 8800 problem
May 22, 2006 08:48
good day! any body can help to analize this problem? the machine wont bootup. checked all internal power input/output supply & all output are ok. except the power output of pcm/io7 has no power.this power supposedly came from AC DELAY OF BOARD. my suspected board is the ac delay of board defective. is it possible? i need your comments. thanks! regards, ramil
to rate and post a comment
Vijai shankar raja
Re: sonoace 8800 problem
May 31, 2006 01:41
Is the machine os booting and comming to the SA8800 booting. If OS is not booting then the problem is with the HDD. Check the HDD
to rate and post a comment
Ramil Cortes
Re: sonoace 8800 problem
May 31, 2006 08:48
Dear sir,
thanks for your responsed/comment regarding this problem.when i turn it on the machine no bootup display on monitor screen. tried to dsiconnect the hard disk & bootup again but same problem hapend, no display on monitor screen & i can't switch off the system. what i did is we disconnect the cable from the AC DELAY OFF BOARD supply going to PCM/io7 so that i can swicth off and on the machine but still have a problem. tried to checked the power from AC DELAY OFF BOARD & no power output going to PCM/io7 is that normal? i need your help again.
tahnks & best regards,
ramil
to rate and post a comment
dwi gunawan saputra
Re: sonoace 8800 problem
July 18, 2009 05:40
please change the RAM on PC module, or contack me in my cell phone 62-81384935159. good luck
dwi gunawan saputra
to rate and post a comment