I have found that sp02 cable damage in the middle, cut off from both sides and tried soldering and as expected does not work. The patient monitor is Datex Ohmeda Compact S/5. Why? What I am doing wrong? I added photo below. It connects but on display shows "check probe".
Specializing in GE, we keep your ICU monitors calibrated and patient-ready—fast, reliable service from expert biomed techs. Southeastern Biomedical: 888-310-7322.
Paul Trqa
SpO2 probe
February 22, 2021 06:33
Hei,
I have found that sp02 cable damage in the middle, cut off from both sides and tried soldering and as expected does not work. The patient monitor is Datex Ohmeda Compact S/5. Why? What I am doing wrong? I added photo below. It connects but on display shows "check probe".
Please look at pictures.
https://imgur.com/nj2HxDd
https://imgur.com/x013tTL
to rate and post a comment
shujo
re: SpO2 probe
February 24, 2021 11:19
Hello,
Poorly soldered. The earth shell must be soldered..
to rate and post a comment