We provide sales, service, rental, and repair for ultrasound systems, probes, and C-arms. We have the largest inventory in the world. Contact us about our special offers on certified refurbished equipment! Call: 317-759-9210 Email: sales@probomedical.com.
Anferov Dmitry
SSD-5500 BD=6
December 30, 2015 10:17
Good afternoon!
Who can faced such problem:
He died physically HDD, found the image of the system, filled to another drive, put, at the start of the BIOS error appears BUS ERROR. With this I understood pertykaniem all boards and connectors, and cleaning their propanol. Recorded in the flash memory device data from the new HDD (switched SW1-7 board EP4104). After that, when loading the BIOS or any error does not appear, but after PC PROG. START blue screen with the software version PC v04.01.00 and BD = 6. below that does not happen. service documentation for: This indicates the numberof DBFRxfocus board (Beam Formerboard).
This message is displayed before normal menu screen. When the CPU for LCD
display start-up and the host CPU (68340CPU) does net start-up, this
message appears.
As usual, nor any documents on the device and no nameplates on it either, but presumably he was 91-year issue. it is not clear, the problem is with the CPU, or may be a software version of the new image is not suitable. the old disk labels here are:
OS00 1.1.0
CA00 4.2.2
PM00 4.1.3
BF00 4.1.0
IL00 4.0.4
Who can faced? or someone that will advise? Thank you!
to rate and post a comment
Kimminsoo
re: SSD-5500 BD=6
December 31, 2015 10:10
Dear sir.
If you want to change HDD to another one, you have to check that version of HDD is same or not at first.
And you must to rewrite flash memory with some file which is recored floppy disk after changing HDD.
To rewrite the flash memory with SW1-7 on CPU board EP4104, it's no use doing because it just rewritting the flash memory without communication with HDD and main CPU board (EP-411800**)
First, I want to know what versionor serial number of your SSD-5500.
Please contact me to my e-mail ( mesmed67@hotmail.com )
to rate and post a comment