Over 1150 Cleansweep Auctions End Tomorrow 07/16 - Bid Now Over 600 Total Lots Up For Auction at Four Locations - CA 07/17, VA 07/21, CA 07/22, KS 07/24
Dear Friend
if you still having the ADW with command window you can make a jumpstart floppy ...by
./prepare.jumpstart and format the floppy
I can send you a floppy from FRANCE next week because i am not at home
Good luck
Azed
Dear friend
You need if you have the ADW service manual to go to the chapter TSG008 or purpose CREATE A JUMPSTART DISKETTE ..if you have not the manual Open a window command ---- Insert a blank floppy into the drive --- type in the command window ---
su - root and hit enter key ---
the password is operator ---
type : cd /export/home/ and hit enter key ---
at the command # type ./prepare.jumpstart and hit the enter key --- answer to the question and it is done
Good luck
Good morning friend
I forgot to tell you before you load the Software on the ADW is to record all the software options keys on the SCREEN CONFIGURATION or just insert a floppy diskette and then make save configuration on the floppy
Good luck
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Ralph Childs
Sun Jumpstart floppy
March 22, 2009 07:47
Hi,
I need to reload an Advantage Windows workstation. I cannot locate the jumpstart floppy. Can someone please email me a copy????
Scooter
scanner1@eim.ae
to rate and post a comment
Shanda HUANG
Re: Sun Jumpstart floppy
March 23, 2009 09:17
Dear Friend
if you still having the ADW with command window you can make a jumpstart floppy ...by
./prepare.jumpstart and format the floppy
I can send you a floppy from FRANCE next week because i am not at home
Good luck
Azed
to rate and post a comment
Ralph Childs
Re: Sun Jumpstart floppy
March 24, 2009 04:08
Shanda,
Which directory??????
to rate and post a comment
Ralph Childs
Re: Sun Jumpstart floppy
April 10, 2009 09:11
Hi,
Which directory do you use the prepare.jumpstart command in?
to rate and post a comment
AZZEDDINE RACHEDI
Re: Sun Jumpstart floppy
April 10, 2009 02:28
Dear friend
You need if you have the ADW service manual to go to the chapter TSG008 or purpose CREATE A JUMPSTART DISKETTE ..if you have not the manual Open a window command ---- Insert a blank floppy into the drive --- type in the command window ---
su - root and hit enter key ---
the password is operator ---
type : cd /export/home/ and hit enter key ---
at the command # type ./prepare.jumpstart and hit the enter key --- answer to the question and it is done
Good luck
to rate and post a comment
AZZEDDINE RACHEDI
Re: Sun Jumpstart floppy
April 11, 2009 03:03
Good morning friend
I forgot to tell you before you load the Software on the ADW is to record all the software options keys on the SCREEN CONFIGURATION or just insert a floppy diskette and then make save configuration on the floppy
Good luck
to rate and post a comment