There are procedures (in the functional check and adjustment manual) that should help you determine the cause of the problem. It might be as simple as a bent pin on one of the chips that were replaced.
________________________________________
Victor,
Do you have an error msg. that points out is the TGP?
Please check the optical sensors for home position, there are other factors that might cause, the home position not to be achieved,
What have you checked as of now?
Thanks.
Jorge Lopez.
HELLO I HAVE A PROBLEM WITH A TOUCH PANEL SYTEC GE 3000 CT CONSOLE GREAT, BUT NOT START THE TOUCH UP THE SYSTEM, AND ERROR MESSAGE ON THE SCREEN :
ER- 001 TPC RESPONSE TIME OUT PNLC LCP = 03 TN = LCDC ADD. = 0020D982
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Victor Gonzalez
sytec 3000
November 04, 2011 08:18
i have problem with TGP board, we changed swap the eprom and we got not home postion
any help
thanks
Victor
to rate and post a comment
April Rogers
Re: sytec 3000
November 07, 2011 12:24
There are procedures (in the functional check and adjustment manual) that should help you determine the cause of the problem. It might be as simple as a bent pin on one of the chips that were replaced.
________________________________________
to rate and post a comment
JORGE LUIS LOPEZ
Re: sytec 3000
November 07, 2011 02:40
Victor,
Do you have an error msg. that points out is the TGP?
Please check the optical sensors for home position, there are other factors that might cause, the home position not to be achieved,
What have you checked as of now?
Thanks.
Jorge Lopez.
to rate and post a comment
Victor Gonzalez
Re: sytec 3000
November 12, 2011 04:53
i got error 100 and error 102
to rate and post a comment
SUN YINGKAI
Re: sytec 3000
November 15, 2011 07:45
Under "ER-100" and "ER-102" have a number,what is it?
And,Servo Amp is good?
to rate and post a comment
Victor Gonzalez
Re: sytec 3000
November 24, 2011 09:56
er-100 aperture error 7
er-102 gantry error 5
to rate and post a comment
ariel MARTINEZ
re: sytec 3000
April 20, 2015 04:26
HELLO I HAVE A PROBLEM WITH A TOUCH PANEL SYTEC GE 3000 CT CONSOLE GREAT, BUT NOT START THE TOUCH UP THE SYSTEM, AND ERROR MESSAGE ON THE SCREEN :
ER- 001 TPC RESPONSE TIME OUT PNLC LCP = 03 TN = LCDC ADD. = 0020D982
NEED TO KNOW WHICH IS THE ERROR
PLEASE HELP
to rate and post a comment