During the scaning, the gantry goes off and tilt to its maximum angle (some times forward, some times backward). Sometime it off and all the leds of the scan box are lit.
I test the sub board and the TPG in other equip and both are ok.
One call to 440-263-6575 and your move will be covered.
We repair & store trailers. We build to your custom needs.
JDI Mobile Medical Manufacturing. Inc. We have your back.
Mario Silva
Sytec Synergy strange problem
December 12, 2008 07:39
During the scaning, the gantry goes off and tilt to its maximum angle (some times forward, some times backward). Sometime it off and all the leds of the scan box are lit.
I test the sub board and the TPG in other equip and both are ok.
Thanks for your help.
to rate and post a comment
Elliot Marcus
Re: Sytec Synergy strange problem
December 12, 2008 10:35
Sounds like a power supply in gantry
to rate and post a comment
Eduardo Vega
Re: Sytec Synergy strange problem
January 04, 2009 06:31
In some cases, the problem could be the temperature in the scaner room. Check it.
to rate and post a comment