Hi,
I have problem with Toshiba PowerVision 8000.
If anybody can tell me what message PRESET PROBE ID means?
Message appears every times, when the system is passing self test and finally could not start up.After loading the software it seems worked, but not for long time.
Is this software problem?
Highly appreciate any comments!
Thank you
Taras
Thank you very much for your answer,you mean that is the software NOT board problem?
I thought it was battery, that created all this, because voltage on battery was critically low, +1.2Volt.
Than simultaneously with installation on software version which was with system.
But I have only FIO system disk (it is floppy not magnito optic!), I am not sure that is enough!
All your comment will be accepted with great thankfulness! System is 2001 software version v1.00ER000
Please contact with me tsveredyuk@gmx.net
Thanks again!
Taras
Hi Tras.I guess there is Bad Sector on HDD so your PIT files were damaged. If you have image programme( for ex.acronis true image) do image from the same HDD and reload. The problem should be solved. If it doesnt work so you can solve it with a strong image.If you haven't strong image so I have this image. contact me pls. yunusalegoz@gmail.com
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
Taras Sveredyuk
Toshiba PowerVision 8000 error code
November 12, 2009 05:04
Hi,
I have problem with Toshiba PowerVision 8000.
If anybody can tell me what message PRESET PROBE ID means?
Message appears every times, when the system is passing self test and finally could not start up.After loading the software it seems worked, but not for long time.
Is this software problem?
Highly appreciate any comments!
Thank you
Taras
to rate and post a comment
le hai nam
Re: Toshiba PowerVision 8000 error code
November 12, 2009 09:50
Hi,
Sofware is working abnormal. Need to re-installtion.
Regards
to rate and post a comment
Taras Sveredyuk
Re: Toshiba PowerVision 8000 error code
November 13, 2009 10:34
Thank you very much for your answer,you mean that is the software NOT board problem?
I thought it was battery, that created all this, because voltage on battery was critically low, +1.2Volt.
Than simultaneously with installation on software version which was with system.
But I have only FIO system disk (it is floppy not magnito optic!), I am not sure that is enough!
All your comment will be accepted with great thankfulness! System is 2001 software version v1.00ER000
Please contact with me tsveredyuk@gmx.net
Thanks again!
Taras
to rate and post a comment
Murat Canpolat
Re: Toshiba PowerVision 8000 error code
November 13, 2009 10:39
I have Toshiba 8000 device belongs to the software. red_royal34@hotmail.com. contact me
to rate and post a comment
Roznovanu Mihail
Re: Toshiba PowerVision 8000 error code
December 11, 2011 04:00
Desr sir
Please help me with powervision 7000!
I gave service demo in service menu and i do no what to do next
roznovanu_mihail@yahoo.com
to rate and post a comment
yunus alegoz
Re: Toshiba PowerVision 8000 error code
November 17, 2009 11:24
Hi Tras.I guess there is Bad Sector on HDD so your PIT files were damaged. If you have image programme( for ex.acronis true image) do image from the same HDD and reload. The problem should be solved. If it doesnt work so you can solve it with a strong image.If you haven't strong image so I have this image. contact me pls. yunusalegoz@gmail.com
to rate and post a comment
Roznovanu Mihail
Re: Toshiba PowerVision 8000 error code
December 20, 2011 03:13
Hi Yunus,
Can you please help me with service at ssa 380a powervision 7000
to rate and post a comment