i have toshiba ssa220A with RTC problem ,so i change the back up battery ,then the machine shows address error pc=000f00c0
need urgent help
anybody have service manual
Hi
You need initialse RAM memory by seting up sam dipswich in CPU Motherboard board. Look please this board. Sam time its writed near dipswich.
For Capacee, if I not wrong, dipswich locate from backside (?).
Best Regard
Hi
thank you very much for your reply
it really help
But after i resset the preset data and user reg
it is stuck(halt) at the initilize screen(copyright toshiba xxxxxxxxxx)and nothing come up.Please kindly help and give some advice.
Dear Sir I have the same problem with my Toshiba ssa370, the battery has 0.58volts and I put a new one WITH the old one, and machine is starting but image is on freez and error mesage is "IMAG. CPU LOCAL NOT DISPONIBLE T&R". Can you help me please? I think is also about initialse RAM memory by seting up sam dipswich. Or something else? I also find another CPU board but mine is serial "PM30-30204*F REV.C" and the one that I find is "PM30-30204*D REV. D". Is compatible? Thank you verry much!!!
Your problem is the software.
You have to reinstall whit simulator and portable pc.
If you do not have I can supply disc.
Let me know.
regards
Umberto Sciunnach
ok what do i need for complete software install ,
i mean like cable or interface for loaing the software to the cpu .
I saw 4 EEPROM with PLCC socket in the cpu.Near the 68000 CPU . are they the program memory.Can we reload the Eprom memory. Becuse i do not have any cable or program interface to the cpu board.
hi everyone
i got 1 Toshiba capasee SSA220. when I connect convex probe, the machine show a message " should turn off the machine" If I didn't everything stop work, i use the probe for the other machine, the probe work fine
please tell me what wrong in this machine, how to repair
Ann
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
eddie tan
Toshiba ssa220A error code (need help)
August 14, 2008 01:38
i have toshiba ssa220A with RTC problem ,so i change the back up battery ,then the machine shows address error pc=000f00c0
need urgent help
anybody have service manual
to rate and post a comment
Uldis Verdins
Re: Toshiba ssa220A error code (need help)
August 15, 2008 03:55
Hi
You need initialse RAM memory by seting up sam dipswich in CPU Motherboard board. Look please this board. Sam time its writed near dipswich.
For Capacee, if I not wrong, dipswich locate from backside (?).
Best Regard
to rate and post a comment
eddie tan
Re: Toshiba ssa220A error code (need help)
August 15, 2008 02:20
Hi
thank you very much for your reply
it really help
But after i resset the preset data and user reg
it is stuck(halt) at the initilize screen(copyright toshiba xxxxxxxxxx)and nothing come up.Please kindly help and give some advice.
Regards.
to rate and post a comment
Uldis Verdins
Re: Toshiba ssa220A error code (need help)
August 18, 2008 09:41
Hi!
Whwn You finishing initialise, You need swich off system and set back dipswich and them swich on again. Best Regard
to rate and post a comment
george dumitru
Re: Toshiba ssa220A error code (need help)
December 11, 2011 10:55
Dear Sir I have the same problem with my Toshiba ssa370, the battery has 0.58volts and I put a new one WITH the old one, and machine is starting but image is on freez and error mesage is "IMAG. CPU LOCAL NOT DISPONIBLE T&R". Can you help me please? I think is also about initialse RAM memory by seting up sam dipswich. Or something else? I also find another CPU board but mine is serial "PM30-30204*F REV.C" and the one that I find is "PM30-30204*D REV. D". Is compatible? Thank you verry much!!!
to rate and post a comment
Luong Tran
re: Re: Toshiba ssa220A error code (need help)
September 03, 2014 09:02
I have a problem the machine pls sent to me service manual ssa220A! Thanks you very much!
to rate and post a comment
Luong Tran
re: Re: Toshiba ssa220A error code (need help)
September 03, 2014 09:02
I have problem ssa220A! pls sent to me service manual to email: sales6789@gmail.com
Thanks you very much!
to rate and post a comment
le hai nam
Re: Toshiba ssa220A error code (need help)
August 15, 2008 11:06
Dear Sir,
I have all Toshiba Ult service manual (Nemio, Aplio, Capaceec, Just vision, etc). Do let me know If you are interested in.
Thanks,
Hai Nam
to rate and post a comment
Gilson Frias
Re: Toshiba ssa220A error code (need help)
October 04, 2008 11:54
Please sentme to the manuals of toshiba capasee ssa-220a to gfrias06@gmail. Thanks.
to rate and post a comment
Chris van Wyk
Re: Toshiba ssa220A error code (need help)
May 19, 2009 04:28
Please. need/send me a service/opera manuals for ssa220h.
Urgent Please
e/mail:chrisvwyk@xsinet.co.za
to rate and post a comment
Islam Kotb
Re: Toshiba ssa220A error code (need help)
June 22, 2010 10:16
I need the toshiba service manuals for ssa270 and ssa 220
Please contact me on islamkotb@gmail.com
to rate and post a comment
Ted Scott
re: Re: Toshiba ssa220A error code (need help)
January 11, 2013 10:40
I am looking for the Users manual for Capasee SSA220A, is this still available? Thank you ted.scott@ozarksmedicalcenter.com
to rate and post a comment
Umberto Sciunnach
Re: Toshiba ssa220A error code (need help)
August 16, 2008 02:20
Your problem is the software.
You have to reinstall whit simulator and portable pc.
If you do not have I can supply disc.
Let me know.
regards
Umberto Sciunnach
to rate and post a comment
eddie tan
Re: Toshiba ssa220A error code (need help)
August 19, 2008 01:54
ok what do i need for complete software install ,
i mean like cable or interface for loaing the software to the cpu .
I saw 4 EEPROM with PLCC socket in the cpu.Near the 68000 CPU . are they the program memory.Can we reload the Eprom memory. Becuse i do not have any cable or program interface to the cpu board.
regards
to rate and post a comment
Umberto Sciunnach
Re: Toshiba ssa220A error code (need help)
August 19, 2008 12:05
Ok
I told you , all that you need I can supply. After that you install the software you send back the pc.
taths all
regards
uto
to rate and post a comment
Roznovanu Mihail
Re: Toshiba ssa220A error code (need help)
December 11, 2011 04:00
Dear sir,
I have toshiba povervision ssa380a 7000 and I entered service demo.
Can you help me to start the unit?
Regards
Mihail
to rate and post a comment
Roznovanu Mihail
Re: Toshiba ssa220A error code (need help)
December 20, 2011 03:13
Can you please help me with powervision 7000?
to rate and post a comment
Jefferson Alfonso
re: Re: Toshiba ssa220A error code (need help)
June 24, 2012 11:59
Could you provide the software in spanish?
jeffalf@yahoo.com
to rate and post a comment
Anh Tran
Re: Toshiba ssa220A error code (need help)
May 03, 2010 03:40
hi everyone
i got 1 Toshiba capasee SSA220. when I connect convex probe, the machine show a message " should turn off the machine" If I didn't everything stop work, i use the probe for the other machine, the probe work fine
please tell me what wrong in this machine, how to repair
Ann
to rate and post a comment
Nesakkumaren Sivakumaran
Re: Toshiba ssa220A error code (need help)
July 05, 2010 12:27
Did you try to 'on' the system without the probe? Does it have have the same msg? Please email to nesa@primamed.com.my for further details.
to rate and post a comment