Do you facing the problem still. I can give you exact solution if you just tell about the LED color of your Floppy Derive.
IF you need any technical information of any type of toshiba CT MRI , I can Help out you. You can email me at technas786@yahoo.co.uk
hello,how are you ?i am gray .
This message are system was protected.
you should insert the system key (3.5 floppy disk)to FDD,
then turn on the console's, it is ok!
if you have any question, email me!(elscint108@tom.com)
good luck!
Dear Don,
Just you simply need to have a floppy disk named "system key" according to the serial number of your Toshiba Xvision machine. Have a contact with me for more information and any help through the following.
mail : Toshiba_CT_service@yahoo.com
call : +98-912-1778296
Ophthalmic-focused expertise in YAG systems including repair, maintenance and calibration handled with precision by trained professionals. Request service • sales@laserlocators.com • 1-877-924-2020
David Denholtz
Toshiba Xvision Boot Problem
January 19, 2004 12:52
Am getting the following sequence trying to get Xvision up and running:
/NICSBOOT/CTV/vaload/roi_man_jmp.ou
/NICSBOOT/CTV/vaload/scroll.out
/NICSBOOT/CTV/vaload/scroll_jmp.out
/NICSBOOT/CTV/vaload/seri.out
/NICSBOOT/CTV/vaload/seri_jmp.out
/NICSBOOT/CTV/vaload/touch.out
/NICSBOOT/CTV/vaload/touch_jmp.out
/NICSBOOT/CTV/vaload/tst_pro_out
/NICSBOOT/CTV/vaload/tst_pro_jmp.ou
/NICSBOOT/CTV/vaload/vpm.out
/NICSBOOT/CTV/vaload/vpm_jmp.out
/NICSBOOT/CTV/vaload/vpt.out
/NICSBOOT/CTV/vaload/vpt_gra.out
/NICSBOOT/CTV/vaload/vpt_gra_jmp.ou
/NICSBOOT/CTV/vaload/vpt_jmp.out
System is Protected...
Any ideas on how to get past this?
Thanks,
Don Kolson
Integrity Medical Systems
800-722-3646
to rate and post a comment
Wiliam Couto
Re: Toshiba Xvision Boot Problem
January 20, 2004 06:55
Brasilia, January 20, 2004.
Dear Mr Kolson,
Try to use System key floppy disk before you initialize system.
Bye
Wiliam Jorge
to rate and post a comment
Engr.Hafeez Ahmad
Re: Toshiba Xvision Boot Problem
April 22, 2005 10:47
Do you facing the problem still. I can give you exact solution if you just tell about the LED color of your Floppy Derive.
IF you need any technical information of any type of toshiba CT MRI , I can Help out you. You can email me at technas786@yahoo.co.uk
to rate and post a comment
gray qianq
Re: Toshiba Xvision Boot Problem
January 21, 2004 01:32
hello,how are you ?i am gray .
This message are system was protected.
you should insert the system key (3.5 floppy disk)to FDD,
then turn on the console's, it is ok!
if you have any question, email me!(elscint108@tom.com)
good luck!
to rate and post a comment
Reza Sharifi
Re: Toshiba Xvision Boot Problem
January 21, 2004 12:56
Dear Don,
Just you simply need to have a floppy disk named "system key" according to the serial number of your Toshiba Xvision machine. Have a contact with me for more information and any help through the following.
mail : Toshiba_CT_service@yahoo.com
call : +98-912-1778296
Regards,
Reza Sharifi
Ariana Tajhiz Eng. Co.Ltd.
to rate and post a comment