deat sir.
thank you very much for your reply
the error is not 160 it is 161,i type it wrong.
there is also some oil in 12 v relay near transformer.
is it normal ?,
please kindly give me advice.
It´s ok.
Err 161 Dosage error won´´t clear DOS_ERR.C
need to recalibrate dosage error.
Your equipment need total recalibrate.
It´s not normal oil. Your need near capacitors review. Clean zone and calibrate.
By
please,
how to make a calibration.
do you have a service manual of force 30
if that can you please send me the copy to
furiousdragon@imap.cc
once again thank you very much MR,HUGO
We are the best choice for all your Endoscopy needs. We have Certified Pre-Owned refurbished and used Endoscopes, and all other related components and
accessories. We are committed to your absolute satisfaction. (513) 469-7267
eddie tan
valley lab force 30 error
June 13, 2008 10:02
i have valleylab force 30 ESU
which is showing error code 160 sometime.
can anyone help me please
thanks
to rate and post a comment
Hernandez Hugo
Re: valley lab force 30 error
June 13, 2008 04:56
Ok
Err 160 LCON value out of bounds - ECON.C
Action, repeat LCON calibration and Save calibration values.
to rate and post a comment
eddie tan
Re: valley lab force 30 error
June 14, 2008 10:33
deat sir.
thank you very much for your reply
the error is not 160 it is 161,i type it wrong.
there is also some oil in 12 v relay near transformer.
is it normal ?,
please kindly give me advice.
to rate and post a comment
Hernandez Hugo
Re: valley lab force 30 error
June 14, 2008 07:37
It´s ok.
Err 161 Dosage error won´´t clear DOS_ERR.C
need to recalibrate dosage error.
Your equipment need total recalibrate.
It´s not normal oil. Your need near capacitors review. Clean zone and calibrate.
By
to rate and post a comment
eddie tan
Re: valley lab force 30 error
June 15, 2008 09:39
please,
how to make a calibration.
do you have a service manual of force 30
if that can you please send me the copy to
furiousdragon@imap.cc
once again thank you very much MR,HUGO
to rate and post a comment
Hernandez Hugo
Re: valley lab force 30 error
June 16, 2008 10:02
Ok, but I have print copy.
Please, give me time for scan this manual.
Oh right?
By
to rate and post a comment
eddie tan
Re: valley lab force 30 error
June 17, 2008 12:58
sure ,take all the time you need.
i like to thank you in advance.
you are really my life saver
eddie
to rate and post a comment
eddie tan
Re: valley lab force 30 error
June 24, 2008 12:40
Dear Mr.Hugo ,
how is the scanning going.
I know you will very busy.
take all the time you need,i can wait.
Thank you very much for the help.
eddie
to rate and post a comment
Chris Baklik
Re: valley lab force 30 error
June 25, 2008 09:40
eddie tan
I can help you e-mail crisb1955@aol.com
to rate and post a comment