I want to ask about VCT64 with 3 VIG. I have 2 Jarell and 1 westville type, is this possible to work on the machine? If so, how to configure this 3 on the system.
I installed this 3 on the VCT64 but it gives me recon error, the recon will reseting and suddenly shutdown on the recon status. I run the vrac_flash_update and it successful. I can even ping all the 3 VIGs. Also try it to reconfig to 1 IG and able to recon. I try all this 3 VIGs. But no luck on when reconfigure it into 3.
Hi Craig, i have 2 available Jarell and 1 Westville, all of them are working if i configure to 1. but when i configure to 3 the system will resetting and shutdown on the recon.
Therapeutic Technologies closeout auctions take place on DOTmed.com. Bid today on 538 lots of medical equipment. Inspections may be done by appointment. Hours are Monday through Friday 9am-4pm Contact chrisnuytens1@gmail.com to schedule.
VIG VCT64
March 14, 2024 11:50
Hello everyone,
I want to ask about VCT64 with 3 VIG. I have 2 Jarell and 1 westville type, is this possible to work on the machine? If so, how to configure this 3 on the system.
Thank you in advance
to rate and post a comment
AMC
re: VIG VCT64
March 15, 2024 11:42
Yes you can mix and match Jarrell abd Westville. It will work
to rate and post a comment
john dismaya
re:re: VIG VCT64
March 18, 2024 11:06
I installed this 3 on the VCT64 but it gives me recon error, the recon will reseting and suddenly shutdown on the recon status. I run the vrac_flash_update and it successful. I can even ping all the 3 VIGs.
Also try it to reconfig to 1 IG and able to recon. I try all this 3 VIGs. But no luck on when reconfigure it into 3.
Thank you for reply
to rate and post a comment
Tranzrad
re: VIG VCT64
March 15, 2024 11:42
I think (but not 100% sure) you need all drives to be identical.
to rate and post a comment
CRAIG WAMBURA
re: VIG VCT64
March 15, 2024 11:42
The GE VCT64 can work with either 1 or 3 IGs......the most important thing is the DARC.....
We can find a solution to your problem
to rate and post a comment
John7475
re: re: VIG VCT64
March 21, 2024 09:11
Hi Craig, i have 2 available Jarell and 1 Westville, all of them are working if i configure to 1. but when i configure to 3 the system will resetting and shutdown on the recon.
to rate and post a comment