Ampronix, a Top Master Distributor for Sony Medical, provides Sales, Service & Exchanges for Sony Surgical Displays, Printers, & More. Rely on Us for Expert Support Tailored to Your Needs. Email info@ampronix.com or Call 949-273-8000 for Premier Pricing.
Kacper Jakubczyk
Vivid 7 video card drivers / error code: 133 [NumBoards=0]
October 24, 2017 10:21
Greetings, i have a problem with vivid 7. The issue is that machine boot normally, and exactly working ;) but we replaced video card and in the boot time (loding ge screen) on the monitor appears error:
[error code: 133 [NumBoards=0]]
when i click ok, appears another error
[invalid driver handle error code:1[]
After clicking next ok, vivid boot system til the end. Machine works normal without any issues. But i need to know how to make this error vanished ? for real i prefered to found drivers than just make error disapered. Any ideas? guys i count on you :) if u have any solution please send it via e-mail to me : medicmedical@yahoo.com
For right now i'm try to instal new software, but in vivid 7 hdd i have sw sys wersion wich is 2.0.8 bep4 and application sw version 5.2.0.
I cannot find information about younger wersion of this software. Do somebody can confirm this is the newest wersion ?
I found few tips about this problem, like checking RAM and software reinstalation but i only have oldest wersions of sw application and sw sys.
Does anybody have similar issue? i'm right now after fight with that for last few days, and honestly i don't know what else i can do... please help
to rate and post a comment
EROTOKRITOS SKENTOS
re: Vivid 7 video card drivers / error code: 133 [NumBoards=0]
October 25, 2017 09:14
My friend this error comes from the video grabber inside the Vivid 7.If you see in the back of the pc there is a board with 2 yellow rca connectors and a s-video connector.Either you remove it and you got this message or the board is bad.
to rate and post a comment
Kacper Jakubczyk
re: re: Vivid 7 video card drivers / error code: 133 [NumBoards=0]
October 26, 2017 09:07
try to unplug and plug again, doesn't work for me :( EROTOKRITOS, u think simply replaceing this board is enough ? error point on exactly this board ?
to rate and post a comment
EROTOKRITOS SKENTOS
re: re: re: Vivid 7 video card drivers / error code: 133 [NumBoards=0]
October 26, 2017 02:28
Yes,if you replace it it will solve your problem but you may need to reinstall the software with the new card.If it does not work you might have a problem in the motherboard with bad capacitors.Please note that you have to install the card in the exact pci slot that it was original.
to rate and post a comment
Kacper Jakubczyk
re: re: re: re: Vivid 7 video card drivers / error code: 133 [NumBoards=0]
October 27, 2017 08:03
namaste my firend, do you have specific sys instalation procedure ? :) i have cd with sys and echo pack. but how to reinstall ?
to rate and post a comment
EROTOKRITOS SKENTOS
re: re: re: re: re: Vivid 7 video card drivers / error code: 133 [NumBoards=0]
October 27, 2017 09:29
First of all write down the passwords from the admin page.
Then you insert the base cd and choose the complete disk install.
When it finish you have to install the application cd.
to rate and post a comment
Kacper Jakubczyk
re: re: re: re: re: re: Vivid 7 video card drivers / error code: 133 [NumBoards=0]
November 02, 2017 02:26
already tried, still doesn't work
to rate and post a comment