Hi.I'm having some problems with the device voluson 530d. When I run the machine and opens the survey, in the upper left corner starts flashing yellow arrow for about two minutes. Then it disappears and starts constantly flashing red bell. What does this mean and how it can be eliminated. Thank you.
Problem Error message "PC Calculating in Progress XX", no 4D, no PID entry possible, no Table reports possible: Arrow on left upper corner of screen remains always flashing( longer then 2 minutes),
Described problems tell us about the same cause, the PC part (inside lower main electronic box named GAA) which is only used for special volume rendering calculations and windows functions. Often related to PC industrial board itself , or maybe some other component of PC.
Could also be caused at external drive problem.
The basic system functions B/D/CFM..are controlled by separate Motorola CPU, and therefore no problem.
Action:
Please remove the SCSI cable on rearpanel of V530D to see the influence of PC booting.
Also an error on the dicom page could create some wait signals, so please check net key-view status- error list , and clear out all errors.
i have also the same problem my volusson 530dmt the arrow on left upper corner not removed in two min
show me the next messages pc calculating in progress 59 sec and after same menssages but now 36 sec
i check the cable of scsi is ok what else can do please help
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
Anton Pristalov
voluson 530D problems
May 06, 2010 09:43
Hi.I'm having some problems with the device voluson 530d. When I run the machine and opens the survey, in the upper left corner starts flashing yellow arrow for about two minutes. Then it disappears and starts constantly flashing red bell. What does this mean and how it can be eliminated. Thank you.
to rate and post a comment
Marko Shevchuk
Re: voluson 530D problems
May 07, 2010 04:10
Problem Error message "PC Calculating in Progress XX", no 4D, no PID entry possible, no Table reports possible: Arrow on left upper corner of screen remains always flashing( longer then 2 minutes),
Described problems tell us about the same cause, the PC part (inside lower main electronic box named GAA) which is only used for special volume rendering calculations and windows functions. Often related to PC industrial board itself , or maybe some other component of PC.
Could also be caused at external drive problem.
The basic system functions B/D/CFM..are controlled by separate Motorola CPU, and therefore no problem.
Action:
Please remove the SCSI cable on rearpanel of V530D to see the influence of PC booting.
Also an error on the dicom page could create some wait signals, so please check net key-view status- error list , and clear out all errors.
to rate and post a comment
arturo gomez
Re: voluson 530D problems
November 24, 2010 04:35
i have also the same problem my volusson 530dmt the arrow on left upper corner not removed in two min
show me the next messages pc calculating in progress 59 sec and after same menssages but now 36 sec
i check the cable of scsi is ok what else can do please help
to rate and post a comment