I have a voluson 730 expert with a problem on the touchscreen. The system boots correctly and activate all functions, both displays work correctly, but the touchscreen don't work. It doesn't display any error or warning, it only doesn't work. All the connections seems fine, all voltages are fine, no visible damage. Something I noticed is that on other systems when it is booting it usually shows an arrow (like a mouse) that respond to the finger movement (i know because I have played with it), but in this case that arrow is not present.
Does anyone know what could be happening??
Does anyone know how to reload the system using the recovery partition??
Thanks for all.
Dante Nuevo
dantenuevo@hotmail.com
From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
Dante Nuevo
Voluson 730 Expert problem
May 16, 2011 04:01
I have a voluson 730 expert with a problem on the touchscreen. The system boots correctly and activate all functions, both displays work correctly, but the touchscreen don't work. It doesn't display any error or warning, it only doesn't work. All the connections seems fine, all voltages are fine, no visible damage. Something I noticed is that on other systems when it is booting it usually shows an arrow (like a mouse) that respond to the finger movement (i know because I have played with it), but in this case that arrow is not present.
Does anyone know what could be happening??
Does anyone know how to reload the system using the recovery partition??
Thanks for all.
Dante Nuevo
dantenuevo@hotmail.com
to rate and post a comment
Roger Cantonjos
Re: Voluson 730 Expert problem
May 30, 2011 10:58
I have service manual...for the problem only or whole service manual????
to rate and post a comment