Voluson 730 PRO - Install Printer

Hi German, please contat me ricardo@ultrasolutions.com

Dear German,

Printer Installation manually
1.) Press the UTILITIES key on the control panel.
2.) In the “Utilities” menu select SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select CONNECTIVITY and then click on the PERIPHERALS tab.
4.) Click the ADD PRINTER button (see: Figure 3-20 above).
Please read the displayed message carefully and click YES if you have skills to do this.
5.) Click the NEXT button to start the Add Printer Wizard.
6.) Select the ‘Local Printer‘, deselect “Automatically install Plug and Play printer” and then click NEXT.


7.) Select the corresponding Printer Port (e.g., Figure 3-22 = USB001) and click NEXT.
8.) In the following window select the HAVE DISK button.
9.) Use the BROWSE button to search the Printer Driver path (R:\system\periph\xxxx).
10.)Click OPEN, select the “xxx.inf” file and click OPEN again.
11.)Verify the selected Printer Driver path and confirm with OK.
12.)Select the manufacturer and model of your printer and confirm with the NEXT button.

Service Login1.) Press the UTILITIES key on the Control Panel. The menu area changes to the Utilities menu.2.) Select the SYSTEM item from the menu area to activate the setup desktop screen.3.) Select the SERVICE page. The “password window” appears automatically.
4.) Enter the password SHE and click the ACCEPT button to display the Service Tools window.
5.) Click on the PRINTER button.
6.) Click the ADD PRINTER button. A warning message appears:Please read this message carefully and click YES if you have skills to do this.

voluson not suport the laser printer if suport just for report a print