Hi
We have a problem with our voluson 730. The problem is that when we turn on the ultrasound and after load the system appears an error.
The error is the next:
memory access violation
action: restard the system
address: 0x18274DCB
module: msrd3x40.dll
memory dump: E8 03 8A 9A 00 7F 27 1B 8A 0C 30 22 CB 88 4C 24 0C
But after reboot the system the error continues.
I was wondering if any of you have found a similar problem or have a solution that may help us.
thanks for your help
Sell your scrap MRI magnets! Top prices, free shipping, and fast pickups. Don't let dust-collecting, idle assets go to waste. Contact: ryan.swiderski@cyclicmaterials.earth or call 437-826-1621
FABIAN CUBILLA
Voluson 730 Pro problem: memory access violation
March 18, 2010 04:57
Hi
We have a problem with our voluson 730. The problem is that when we turn on the ultrasound and after load the system appears an error.
The error is the next:
memory access violation
action: restard the system
address: 0x18274DCB
module: msrd3x40.dll
memory dump: E8 03 8A 9A 00 7F 27 1B 8A 0C 30 22 CB 88 4C 24 0C
But after reboot the system the error continues.
I was wondering if any of you have found a similar problem or have a solution that may help us.
thanks for your help
to rate and post a comment
rugut joseph
Re: Voluson 730 Pro problem: memory access violation
March 19, 2010 09:33
I also have a aimilar probelm whereby it's asking for applications software, we hope to get a sftware reload and if you get a source please tell me
to rate and post a comment
lin sheryl
Re: Voluson 730 Pro problem: memory access violation
March 23, 2010 09:21
Maybe the software or memory of system have problems,need to be test and confirm.
to rate and post a comment
DJIELA Flavien
Re: Voluson 730 Pro problem: memory access violation
March 25, 2010 10:08
The memory is corrupted or it's faulty.
You need first of all to change the memory and if the problem is not solve you reload the software.
to rate and post a comment
Ledio Tushe
re: Re: Voluson 730 Pro problem: memory access violation
June 25, 2014 04:24
HI,
I have the same problem.
What do you mean with reload the software?
Thanks
to rate and post a comment
Rey Gonzalez
re: re: Re: Voluson 730 Pro problem: memory access violation
July 10, 2014 09:12
contact me rey@allultrasoundservices.com
to rate and post a comment
sok aun sa
re: Re: Voluson 730 Pro problem: memory access violation
February 22, 2015 10:17
how to solve with reload software....? if the message servlog always appear and can not do anything. (restart only)
Thank and regard,
to rate and post a comment
GERARDO SANTILLAN
re: re: Re: Voluson 730 Pro problem: memory access violation
October 05, 2015 04:42
servlog.dll
to rate and post a comment