I had problems with the database and proceeded to reload the software. 1. The reader did not read the disc. 2. Did not answer the keyboard to enter the bios. 3. I had to burn the software in a bootable usb and place an external keyboard. 4. after recharging the software, the control panel does not respond or turn on touch.
They informed me that before failing the database they had problems with the control panel.
Hello, Miguel!
Check the if all usb connections are done correctly to the motherboard.
If You doubt - I can send You a connection diagram.
s.v.zhel@gmail.com
Regards!
MIGUEL ANGEL TORRES MARTINEZ
VOLUSON E6
April 23, 2019 10:06
I had problems with the database and proceeded to reload the software.
1. The reader did not read the disc.
2. Did not answer the keyboard to enter the bios.
3. I had to burn the software in a bootable usb and place an external keyboard.
4. after recharging the software, the control panel does not respond or turn on touch.
They informed me that before failing the database they had problems with the control panel.
to rate and post a comment
CRAIG WAMBURA
re: VOLUSON E6
April 24, 2019 10:25
First check your RTP Secondary Power Supply....
WhatsApp +256782702243
to rate and post a comment
Sergey Zheleznyak
re: VOLUSON E6
April 25, 2019 10:52
Hello, Miguel!
Check the if all usb connections are done correctly to the motherboard.
If You doubt - I can send You a connection diagram.
s.v.zhel@gmail.com
Regards!
to rate and post a comment