Hi Anonymous User!
Start with Your Name and place - from.
Nrext, Write please all errors for XC in detail (OK, Reset XC and ///Detail///).
My sugetation - You not calibrate IF for New tube or Generator have sam problem with electronic (speciale in internal power supply for XC board).
Write mode detail what You did to do when change New tube: Is it tube calibrated for IF preheat, Aligned in L/R and R/F direction, Whater/ Air calibration etc.
Best Regard,
Uldis
HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com
XC ERROR CODE 0XB2100000
April 19, 2018 05:27
HELLO,
WE CHANGE THE XRAY TUBE FROM A CT AQUILION 4 BUT SOME TIMES IT IS WORKING AND HAS THIS PROBLEM:
XC ERROR CODE 0XB2100000 DEV 0X00010002 PNO6
CAN SOMEONE HAS WORK WITH SOMETHING SIMILAR?
to rate and post a comment
Uldis Verdins
re: XC ERROR CODE 0XB2100000
April 21, 2018 01:17
Hi Anonymous User!
Start with Your Name and place - from.
Nrext, Write please all errors for XC in detail (OK, Reset XC and ///Detail///).
My sugetation - You not calibrate IF for New tube or Generator have sam problem with electronic (speciale in internal power supply for XC board).
Write mode detail what You did to do when change New tube: Is it tube calibrated for IF preheat, Aligned in L/R and R/F direction, Whater/ Air calibration etc.
Best Regard,
Uldis
to rate and post a comment
Aurangzeb Durrani
re: re: XC ERROR CODE 0XB2100000
July 06, 2018 10:33
how i write down facing xc error code|0x1a87f7d0|,3f3e3f3f3f3f3f3f3f3ff2f2f2f2f2f00
to rate and post a comment