i am needing help with this system, when switch on only display ziehm imaging logo in all monitors and touchscreens all time, the softwate never became working level, i was checking the silver box o imaging system memory in the monitor cart and found the cpu board battery death, and i am thinking bios configuration lost, i connected a vga monitor to cpu board vga port and i can see the linux booting but a final display a booting fails, and i can in t setup menu too and date and hour are bad, if anybody can help me with some directions or instructions to made the rom bios restore or if the hard disk has a software corruption maybe to have the software installers
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
Jairo Manzaneda
ziehm vision c arm boot problem help
July 05, 2019 11:35
i am needing help with this system, when switch on only display ziehm imaging logo in all monitors and touchscreens all time, the softwate never became working level, i was checking the silver box o imaging system memory in the monitor cart and found the cpu board battery death, and i am thinking bios configuration lost, i connected a vga monitor to cpu board vga port and i can see the linux booting but a final display a booting fails, and i can in t setup menu too and date and hour are bad, if anybody can help me with some directions or instructions to made the rom bios restore or if the hard disk has a software corruption maybe to have the software installers
thanks in advance
to rate and post a comment