Bruce Raynor, Proprietor
DOTmed user since August 2010
Part Number: BPM-300
complete not functional
Three available. Displays light up and respond to the controls. There is no damage to the cases, display surfaces, keypad covers or hose ports. These appear to have malfunctioning control boards... view more
Asking Price:
$75 USD
ECG, Temperature, NBP, SPO2, Defib Sync and display ports. In good working order. One parts unit is available for $50 less. It has damage to the plastic frame around the NPB port. All of these... view more
Asking Price:$175 USD
$140 USD (20% Off)
Part Number: 3368391
Sensor Tunk Cable with SPO2 & Temp
This is a standard cable and is CE stamped, Health Canada and FDA approved. It does however have a slightly extended P/N: 3368391B3. Two are available.This 3.5 meter long cable has integrated... view more
Asking Price:
$99 USD
Part Number: 2357
Battery Operated
The battery, tubing and collection tool were removed from this kit. All remaining components are warrantied to be in good condition. What you see in the pictures is what you will receive. ... view more
Asking Price:
$45 USD
Part Number: 117322
ECG, temperature module
DINAMAP MPS module tested and found to be in good working order. Included are a three lead ECG trunk (made by Physio Controls) and temperature probe lead (6')Payment by PayPal, VISA or MasterCard.... view more
Asking Price:
$275 USD
This unit powers up and responds to controls. There is no damage to the case, scope port or control covers. It does indicate a fault on power up which seems to be the lamp. It is priced... view more
Asking Price:
$99 USD
Part Number: 117310
SPO2 module & sensor
Dinamap MPS module tested and found to be in good working order. Included is a reusable (used) Nellcor DS100A adult finger sensorPayment by PayPal, VISA or MasterCard. Shipping to the US or... view more
Asking Price:
$285 USD
Part Number: AD-3 DIS-1
analog Delay / Windows Discriminator
I have two sets of these modules. They came with some other BAK equipment which has been sold. They are believed to be in good working order, however they are almost 30 years old.According to... view more
Asking Price:
$199 USD
Part Number: 117345
CO2 module & Capnostat sensor
Dinamap MPS module tested and found to be in good working order. Included is a Drager Capnostat sensor tested on this module and found to be without issue.. Payment by PayPal, VISA or MasterCard.... view more
Asking Price:
$395 USD
This is an older unit in good operational condition. There are few scuffs and scrapes on the outer housing but the fan and controls work fine. No manual or other accessories are included. ... view more
Asking Price:
$65 USD
The model 20403 Prism monitor comes with SPO2 and ECG 3 lead sensors. It has a bright & responsive display and controls and there is no damage on the housing or input ports. This configuration... view more
Asking Price:$198 USD
$99 USD (50% Off)
Part Number: 117335
Recorder printer
Tested and found to be in good working order. Other modules and a MPS monitor are available in the Raynor Shine DOTmed stare accessed by way of the green tap n the right of this ad.Payment by... view more
Asking Price:
$175 USD
Part Number: 870
Fixed Position Rotor 50 ML x 8
No apparent damage or balance issues. MAX 19,500 RCF/45,500 RPM. The seal looks fine, but is at least 5 years old. This rotor is used but in good condition.US/Canada shipping will be under $60. ... view more
Asking Price:
$750 USD
Part Number: NEMCA 130
40" Shielded Patient Cable 5 lead
We have 3 used sets in stock in very good condition and come with a 7 day inspection warranty. The Northeast Monitoring NEMCA 130 cable is a 5 lead one-piece cable for use with Northeast... view more
Asking Price:
$65 USD
Required P/N C643 charging base for Nicolet Imex FreeDop or ImexDop CT+ (fits either) - transforms 110 VAC to 12 VDC. Power output should have been checked to confirm 12 VDC output Will purchase... view more
67
