Here is an Infors HT Multitron Humidity/CO2 Triple Incubator Shaker Unit19
Condition:
This Infors HT Multitron Humidity/CO2 Triple Incubator Shaker is in good working condition.
Please see the exact video and photos below.
Testing we performed:
The Infors HT Multitron Humidity/CO2 Triple Incubator Shaker passed all tests and was found to be fully functional:
Tested power: PASSED
Tested full recommended RPM range: PASSED
Tested full temperature range: PASSED
Tested temperature sensor accuracy with calibrated equipment: PASSED
Tested steam generators & humidity control: PASSED
Tested relative humidity sensor accuracy with calibrated equipment: PASSED
Tested CO2 Solenoids: PASSED
Tested CO2 Sensor Accuracy with Calibrated Equipment: PASSED
Tested door safety shutoff: PASSED
Tested door latch solenoids: PASSED
Tested capillary thermostat shutoff: PASSED
**New** Belts Installed
Shaker Bearings Inspected and Replaced as Needed
Shaker Bushings Inspected and Replaced as Needed
The testing performed on this Infors HT Multitron Triple Incubator Shaker confirms it is in good working condition.
This includes doors, controls and shaking platforms.
Due to this testing you can purchase this Infors HT Multitron Triple Incubator Shaker with confidence it is ready to go.
System consists of:
Infors HT Multitron Humidity/CO2 Triple Incubator Shaker
CO2 Quick-Connect Fittings (Qty.:6)
Shaker Trays with Blue Adhesive mats (Qty:3)
Standard Power Cable (Qty.:3)
We have flask holder/sticky mat tray options on hand that can be installed per request.
Configuration and Setup:
Capacity: approx 200 Liters Per Chamber
Interior Dimensions: 390 x 925 x 550 mm per chamber;
Exterior Dimensions: 1075 x 865 x 1994 mm
Temperature Range: 9DegC to 65DegC
Shaking Speed: 20-400 RPM rpm, depending on load and stacking (Note: Unit has 25mm Throw)
Approved load for a standard unit with 25 mm throw (incl. tray): 9 to 19kg for up to 350 rpm; 12 to 16kg for over 350 rpm
CO2 Range: 0-19.5% CO2
Humidity Control (up to 40C): range 20... .max. 85% rH, Control by Vaporizer, Water Inlet Pressure max 1Bar
Video Description:
The video below gives an overview and demonstrates functionality of the Infors HT Multitron Humidity/CO2 Triple Incubator Shaker.
TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON “WEBSTORE”; TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.
DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.
ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.