For Sale LINKAM FDCS196 Linkam FDCS196 Freeze Drying Pro System w/Edwards Vacuum Pump

For Sale Linkam FDCS196 Freeze Drying Pro System w/Edwards Vacuum Pump

Pre-owned instrument

• Fully Functional
• Current model
• Serviced & in Stock
• Good cosmetic condition
• Warranty

Here is what you will receive:
• T95 main controller
• FDCS196 Linkam Lyophilisation Stage
• LinkPad screen
• LNP95 liquid nitrogen pump
• MV196 Motorised Valve
• Edwards Vacuum Pump E2M1.5
• Pirani Vacuum Gauge
• Communication and power cables

Please note that the vacuum pump will ship drained of oil; we will include an oil canister for you to refill.


The exact configuration is called by Linkam "Freeze Drying Pro System". It is an upgrade over the regular "Freeze Drying System", with the inclusion of a vacuum pump and motorized vacuum valve. The only part missing is the 2L Dewar tank for the liquid nitrogen. This component is a $200-$500 part.

Linkam FDCS196 Freeze Drying Pro System Configuration:
Linkam T95 System Controller:
• Operating Environment: 5~40DegC, 80% relative humidity at 31DegC decreasing linearly to 50% at 40DegC (without condensation)
• Temperature Sensor: Supplied with platinum resistor input as standard
• Temperature Accuracy: 0.05DegC
• Temperature Stability: 0.05DegC
• Set Point Resolution: 0.1DegC

Linkam FDCS196 Lyophilisation Stage:
• Temperature Range: < -195DegC
• Heating/Cooling Rates 0.01DegC to 150DegC/min
• Temperature Stability < 0.1DegC
• Condenser Lens Working Distance 12.5mm
• Objective Lens Working Distance 4.8mm
• Typical Sample Volume ~5uL
• Vacuum: up to 10-3 mbar

Linkam LinkPad:
• Display Resolution: 320 X 240 pixels
• Display Size: 5.7 inch
• User Interface: touch screen

LNP95 Liquid Nitrogen Pump:
• Tubing: Silicon Rubber

The MV196 motorised valve system enables precise control of the vacuum level between 0.1 to 100mBar.
• The MV196 is combined with an Edwards Vacuum Pump E2M1.5.

Edwards Vacuum Pump E2M1.5.
• Ultimate vacuum (total pressure): without gas ballast 3 x 10-3 mbar; with gas ballast 2.5 x 10-2 mbar
• Maximum permitted pressure at outlet: 0.5 bar gauge / 7 psig
• Maximum inlet pressure for water vapour: 15 mbar / 11 Torr
• Maximum water vapour pumping rate: 16 gh-1
• Operating temperature range: 12-40 DegC

Customization/Options: n/a

Testing performed by our in-house service team:
• All tested components are functioning properly.
• The heater activates and sustains temperature.
• The vacuum pump engages and creates a vacuum.
• The vacuum gauge successfully detects the vacuum.
• The liquid nitrogen pump activates as scheduled.

Instrument Overview:
• Linkam Geology System with Edwards Vacuum Pump is designed for geological studies.
• Compatible with various microscopy techniques.
• Enables observation of sample behavior under controlled conditions.
• Facilitates geological sample analysis with precise temperature control
• Enables controlled observation of geological samples under vacuum
• Ideal for geologists and earth scientists requiring accurate data acquisition
• Enhances understanding of geological phenomena through controlled experimentation

Instrument Application:
• Research in mineralogy, petrology, and geochronology
• Useful in studying geological processes and material transformations
• Reliable performance in geoscience applications.

The key features of Linkam FDCS196 Freeze Drying Pro System:
• Precise temperature control
• Compatible with microscopy
• Small sample volume
• Uniform vacuum
• Motorised vacuum control
• Geological research support

Why should you buy from us?

Our Advantage
• We have experience servicing and repairing these instruments.
• This instrument goes through all the described service steps before shipping.
• We offer detailed photos and videos of the instruments you buy.
• We are an approved pre-owned equipment vendor to many large US, Canadian, and EU Universities.
• We are an approved pre-owned equipment vendor to many Fortune 500 US and International Biopharma companies.
• Many upgrade and repair parts are in stock.
• Remote installation and instrument operation training are available.
• On-site installation may be available in the Boston Area (New England area)
• US or International shipping is no problem (see the shipping tab on how we pack and feel at ease)

Our Guarantee
• It will work!
• Warranty
• You get after-sales technical support.
• Smooth process from the initial quote to order fulfillment.
• Customer references are available.

This will ship via freight. Please contact us with your zip code to obtain shipping quote.
*SM* Small Crate
200#

PLEASE NOTE THAT THE QUESTIONS BELOW ARE ANSWERED IN MORE THOROUGH DETAIL ON OUR WEBSITE

Q: Can I view this instrument in person at your facility or do a live Zoom demo before it is shipped to me?
A: We can accommodate both in-person or Zoom demos.

Q: What about the warranty?
A: The instrument comes fully warranted for both parts and labor.

Q: Do you offer installation, service, etc?
A: We offer remote installation and training packages to familiarize you with this instrument.

Q: What should I watch out for when buying a used/pre-owned instrument from another lab?
A: Ensure that the instrument is in good working condition with no damage or wear that could affect its performance. Ask for details about testing steps performed, video demo, and test screenshots.

Q: Do you have more than one of these instruments on hand?
A: We generally carry multiple instruments on hand, along with a variety of spare parts.

Q: This procurement is for a University or College. Are purchase orders with NET terms accepted?
A: We accept purchase orders from all major US and Canadian universities.

Q: How fast will you ship?
A: We can ship within a few days to two weeks. Shipping time depends on the current demand for our instruments. Members of our sales team will be able to offer current delivery estimates.

Q: Will my instrument be insured during shipping?
A: Absolutely! We insure all our shipments as long as we are the shipper. If a customer ships on their account, they handle insurance.

Q: How do you pack? Have you previously packed and shipped the fragile laboratory instruments?
A: We have extensive experience shipping high-end and complex laboratory instruments in the US and Internationally.

Q: Do you ship Internationally?
A: Yes! We have shipped to multiple continents and over 30 countries.

Q: How much will I save buying it pre-owned, and is it worth it?
A: When compared to buying a new instrument, you will save 60% or more and have plenty of funds left over for an additional instrument or two.

TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON “WEBSTORE”; TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.

DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.

ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.