Over 450 Total Lots Up For Auction at Three Locations - NY 05/20, TX 05/22, WI 05/27

You must be a DOTmed registered user to watch this auction, but there's good news:

Become a registered DOTmed user for FREE by using the link below, or log into your existing DOTmed account. Registration takes just minutes and gives you these benefits:

Sign up here, it takes just minutes and is completely free.

Register

Registration is Free and Easy.

Enjoy the benefits of The World's Leading New & Used Medical Equipment Marketplace.

Register Now!
 
spacer
BAXTER RK 2000 PHARMASEAL K Heat Therapy Unit BAXTER RK 2000 PHARMASEAL K Heat Therapy Unit BAXTER RK 2000 PHARMASEAL K Heat Therapy Unit
BAXTER RK 2000 PHARMASEAL K Heat Therapy Unit BAXTER RK 2000 PHARMASEAL K Heat Therapy Unit BAXTER RK 2000 PHARMASEAL K Heat Therapy Unit

BAXTER RK 2000 PHARMASEAL K Heat Therapy Unit

  • Starting Bid USD $50.00

  • This item will not be sold if the Reserve price is not met.
  • Time Left
  • Bid Closes May 22 - 1:25pm EDT
  • Auction # 265851
Lot #1085658
Bid on this auction
Hosting Fee
Winning Bid Fee
USD $1.00 and up 18.00%
  • Location: TX, USA
  • MFG: BAXTER
  • Model: RK 2000 PHARMASEAL K
  • Type: Heat Therapy Unit
BAXTER RK 2000 PHARMASEAL K-THERMIA UNIT:


VENDOR DESCRIPTION
________________________________________
The BAXTER RK-2000 PHARMASEAL K-THERMIA Hypothermia Unit provides a means of regulating patient temperature by supplying temperature-controlled water through a connector hose to a hypo/hyperthermia blanket. The blanket provides an interface for heating or cooling the patient. A patient probe senses patient temperature, which is displayed on the control panel.
The unit controls output water temperature by mixing hot and cold water using hot and cold solenoid valves under microcontroller control.

The feedback for control purposes depends upon the unit's operating mode. The unit may be operated in one of three operating modes:

• In MANUAL mode, the operator sets the desired blanket temperature.
A temperature sensor within the unit monitors the water temperature and the unit heats or cools the water as required to bring the blanket to the SET POINT temperature. The patient temperature may be monitored by use of a patient probe connected to the patient probe jack on the front of the unit.

• In AUTO mode, the unit automatically regulates the patient's temperature to the selected SET POINT. The unit constantly compares actual patient temperature with the SET POINT value and automatically adjusts the blanket temperature so that the desired patient temperature is achieved.

• In MONITOR mode, the operator can monitor patient temperature through the patient probe, without providing therapy.

Hypo/hyperthermia blankets may be placed either under or over the patient, depending upon the type of procedure. Some applications may require a second blanket in order to achieve additional or more rapid heating or cooling. For these situations, a second blanket may be connected to the unit. The rate of patient heating or cooling may also be increased by positioning half- and full-sized blankets so that greater body surface is in contact with the blankets.


FEATURES
________________________________________
Rolling unit on four casters
Patient probe connectors
LED windows show fluid and patient temperatures
Warning indicators
Transport handle and hose connectors on back of unit
Power cord with hospital grade plug
Instructions printed on instrument
Cord wrap


SPECIFICATIONS
________________________________________
Display: LED, LCD, graphics
Weight: 59kg (130 lbs)
Power Needed, Vac: 115
Dimensions (HxWxD) (Rise Time, msec): 94.5x 46.2 x 39.4


RESOURCES
________________________________________
Baxter RK 2000 Pharmaseal K-Thermia Unit Specifications
Baxter RK 2000 Pharmaseal K-Thermia Unit Procedures


CONTENTS
________________________________________
Qty - 1 Baxter RK-2000 Pharmaseal K-Thermia Unit
Qty - 2 Hoses

If it is not specified here don't assume you will be getting it.


CONDITION
________________________________________
Cosmetic - Good
Working - Good


Information

Buyers Premium: 18% with 3% cash discount

Inspection
Inspection is welcome. Please click email seller or contact mme@meenamedical.com or 817-283-1640.

Address:
Meena Medical Equipment Inc.
1905 Bedford Road
Suite 100
Bedford, TX 76021

WARNING TO ALL BIDDERS. DESPITE WHAT MAY BE WRITTEN IN THIS AUCTION, DOTMED RECOMMENDS THAT BIDDERS ASSUME THAT THE CONDITION OF THIS EQUIPMENT IS UNKNOWN. DOTMED ENCOURAGES YOU TO INSPECT EQUIPMENT BEFORE YOU BID. ALL ITEMS ARE SOLD 'AS IS' & 'WHERE IS' AND UNLESS THE SELLER HAS INDICATED OTHERWISE, THERE WILL BE NO REFUND

Inspection:

Inspection is welcome. Please click email seller or contact mme@meenamedical.com or 817-283-1640.

Terms:

No property removed until fully paid. All equipment is sold as is and where is. The information contained in this listing is subject to inspection and verification by all parties relying on it. No liability for its accuracy, errors, or omissions is assumed by the seller, the representative of the seller, Meena Medical Equipment Inc. or their agents.

All property is sold 'AS IS', and ALL SALES ARE FINAL. Property is open to thorough public inspection. It is the Bidder's responsibility to determine condition, age, genuineness, value or any other determinative factor. Meena Medical Equipment Inc. may attempt to describe the merchandise in advertising, on the Internet and at the auction but makes no representations. In no event shall Meena Medical Equipment Inc. be held responsible for having made or implied any warranty of merchantability or fitness for a particular purpose. Bidder shall be the sole judge of value.

Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. It is the Bidder's responsibility to determine condition, age, genuineness, value or any other determinative factor. Meena Medical Equipment Inc. shall endeavor to describe in detail each item and any pertinent information about it.

Meena Medical Equipment Inc. will not be responsible for any errors or omissions in the description of the merchandise unless it is a material and intentional misrepresentation of the item itself. Bidder agrees that everything is sold as is and that they may not return any item they purchase.

The Bidder agrees that the seller, any representatives of the seller, Meena Medical Equipment Inc. or their agents shall not be held responsible or liable:

* for any injuries or damages, whether incidental or consequential, associated in any way with the equipment;

* for compliance with regulations on ownership or use of the purchased item within the jurisdiction in which the purchaser resides and/or uses the item.

The sale of this item may be subject to regulation by Health Canada, the U.S. Food and Drug Administration and other national/provincial/territorial/state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to Health Canada or FDA regulation and it is to be used for regulated medical services in Canada or the USA, your payment for it indicates you are an authorized purchaser and will comply with these regulations. If you have questions about legal obligations regarding sales of medical devices, you should consult with Health Canada, the FDA or the regulatory authorities in the jurisdiction in which the item is to be used.

Shipping/Pickup:

Seller will provide a packing and shipping quote for all buyers. Buyer's can also do their own packing and shipping. Items must be removed in 10 days or storage fees may be applied.

There will be a nominal Auction Hosting Fee added to the amount due if you are the Successful Bidder. This fee will be paid directly to DOTmed.com and not to the Seller of this Auction. See the Hosting Fee schedule in the table below.
Hosting Fee
Winning Bid Fee
USD $1.00 and up 18.00%

Warranty:

AS IS WHERE IS
There have been no questions regarding this auction yet. Ask a question.
There may be additional information with respect to this auction, please click the following links for more information
Condition Terms & Conditions

If you plan to bid...

You must become AN APPROVED BIDDER before you can bid on this auction. To become an APPROVED BIDDER you can either become DOTmed Certified, provide a credit card or apply for pre-approval. Click here to learn more about becoming a pre-approved bidder.

If you are not a Pre-Approved bidder, you will be asked for your credit card information when you click "Enter Bid".

Your credit card will not be charged if you are the Successful Bidder for this Auction and complete the transaction. In the event that you are the Successful Bidder and fail to complete the purchase/sale transaction and you supplied a credit card as part of the Approved Bidder process, your credit card will be charged by DOTmed the amount of your bid or $2,000, whichever is less, as an administrative fee. Similarly, if you are the Pre-Approved Successful Bidder and fail to complete the purchase/sale transaction, your Pre-Approval shall be revoked and DOTmed shall invoice the amount that otherwise would have been charged if a credit card had been provided and such invoice is payable upon receipt. The referenced administrative fee is, in each instance, in addition to any additional rights or remedies that the Seller or DOTmed may have.

For bidders who have not previously purchased via DOTmed Auction: DOTmed may place a $200 hold on your credit card as part of our Approved Bidding process. You will not be charged if you are not the Successful Bidder for any items and the authorization will be released at the end of the auction event. Please check with your financial institution for confirmation of available funds/credit. In some cases, releases may take a longer period of time depending on your bank's processing time.

The Successful Bidder agrees to sign the DOTmed Confirmation of Purchase. Click here to view a sample copy and read the terms and conditions of sale.