(2 Individual units available) These Drager Narkomed M Mobile Continuous Flow Anesthesia Ventilation Machines are in excellent cosmetic and power tested working condition. These are smaller more compact mobile cart mounted systems. Both units come with the Monitor, Gas Delivery System, Oxygen Sensor, Flowmeter Bank, Auxiliary Oxygen Flowmeter, Pressure Gauge, Ventilator, Absorber System, Bellows, Internal Battery, Fresh Gas Hose, Volume Sensor, Inspiratory Valve, Expiratory Valve, PEEP Valve, Mobile Cart and Power Cord, Oxygen Tanks or Bags included. Comes with the breathing pressure hoses and the fresh gas outlet hose. No vaporizers included. All other hoses will need to be obtained. These machines are used to deliver gases and anesthetic vapor for adult and pediatric patients.
During testing we powered on the machines, the monitor illuminates and the devices begin the self-check diagnostic. All checks register 'PASS' on the start-up screen without issue. All digital number displays are working. I can use the soft touch buttons on the monitor to navigate the device. Since we do not have access to gas supplies, canisters or the needed hoses, no further testing has been conducted. The internal battery is present but battery condition is unknown and unwarranted.
These devices are in excellent cosmetic condition. The outer shell of the devices are nice and show only a few minor superficial scratches with no cracks or broken pieces. All glass covers are undamaged. All markings are clear. The tank connectors look good. All dials and gauges are present. The carts are made of a sturdy metal construction with four rolling swivel casters with locks. Two of the casters at the back of the carts have a 180-degree adjustment where they can be turned out of the way to allow the device to fit into tighter spaces. What you see is exactly what you will get so please take a good look at the pictures. I am not an expert on these devices but they are very nearly complete and wont take much to get them there. Guaranteed to not be DOA.
(We have another 1 of these units listed, same as these but without the oxygen sensor. We also have a Lot of 5 units listed for parts/repair. Please see my other listings or reach out. Thanks!)
Specifics
Drager Narkomed Mobile Anesthesia ventilation Cart
(2) Individual Units Available
Model: Narkomed M
Serial No: 10664, 10481
Power: 100-240V~ , 50/60Hz , 250W
Internal Battery: (Model: LC-R123R4P) (Output: 12V, 3.4Ah/20HR)
Gases: Air, Nitrous Oxide, Oxygen
Flow Meter Bank: Air, Nitrous Oxide, Oxygen (0.1-8 L/min)
AUX Oxygen Flow Meter: 1-10 L/min
Pressure Tidal Volume: 200-1400ml
N2O, Air & O2 Gauges: 0-100psi
Cylinder Guage: 0-3000psi
Oxygen Sensor Guage: -20 to 80
Internal Battery
Model: LC-R123R4P
Power: 12V, 3.4Ah
PEEP Valve
Model: 4114164
Monitor
Model: 4115756
Manufacturer's Description
The Narkomed Mobile is a compact, lightweight, continuous flow anesthesia system. All Narkomed Mobile machines are equipped with a monitoring system and pneumatic circuitry for delivering gases and anesthetic vapor for adult and pediatric patients.
Condition & Testing
These units are in excellent cosmetic and power tested working condition. During testing we connected the devices to AC wall power and turned the machines from Stand By to ON using the dial. Once powered on the monitors illuminate and the devices begin the self-check diagnostic. All checks register as "PASS" without issue for both units. There is a prompt at the bottom of the start up screen that says "preventative maintenance due" followed by "functional". I believe this is just indicating that the devices are due for maintenance but are still operational. I can use the soft touch buttons on the monitors to navigate the devices. Since we do not have access to gas outlets or cannisters, or the few missing hoses, no further testing has been conducted. The internal batteries are present but battery condition is unknown and unwarranted. These units were also recently removed from a working facility so I believe they are fully operational but it would be proper to have them checked by a qualified technician before being put into use.
The outer shell of the devices are nice and show only a few superficial scratches but no cracks or broken pieces. The monitor adjustments work to orient the monitors in the desired direction and height. All glass covers are nice and undamaged. All markings are clear. The tank connectors look good. All dials and gauges are present. The bellows look in good shape along with the absorbers. The remote display, volume sensor, breathing pressure and oxygen sensor connections are secure and undamaged. The carts roll smoothly and wheel locks are working. Two of the casters at the back of the devices have a 180-degree adjustment where they can be turned out of the way to allow the devices to fit into tighter spaces. Overall these are really nice machines.
Age
Date of MFR. code: 3003, 4001 (according to labels)
Dimensions
Overall Dimensions: 25" wide x 22" deep x 51" tall
Warranty
I stand behind everything I sell and for 30 days I guarantee these Drager Narkomed M Anesthesia Machine Cart are exact to the description and pictures I have provided here or return it for a refund.
Shipping
This unit weighs 93 lbs and will have to be freight shipped
Pallet weight is 143 lbs
Pallet dimensions are 36x36x40
NMFC is 56680 "Medical Machinery"
Freight Class is 175
To give you some idea it will cost approximately $250.00 for west coast shipping and approximately $350.00 for east coast shipping.
Residential delivery, limited truck access, lift gate service and inside delivery does cost extra. Contact me with your shipping address and services needed for an exact quote.
Pickup is always welcome. located in Coolidge Arizona 85128 which is 40 miles SE of Phoenix Az near I-10
All other international buyers must contact me prior to purchasing for a shipping quote.
Return Policy
