Lead Time: Usually ships in 5-7 business days
Warranty: 90 Days
Designed for use in physician's offices, clinics, hospitals, nursing homes, and laboratories, the Ritter M7 SpeedClave® Steam Sterilizer sterilizes wrapped and unwrapped instruments, linen packs, and glassware. Additionally, we recommend that you use sterility monitors to ensure sterility.
Distilled or demineralized water for sterilization is contained in the condensing tank and is released when the FILL/VENT lever is pressed. The water flows through piping to the chamber until the chamber is filled to within 1/2" (13 mm) of the front rim. After the chamber has been loaded and the door closed and locked, the unit is ready for sterilizing. A temperature regulator controls the heat and a timer controls the duration of the cycle. After sterilization has been completed, the steam is exhausted from the chamber by pressing down on the FILL/VENT lever, allowing the steam to return to the condensing tank.
Also known as the Ritter M7 Autoclave and Castle Speedclave M7, and Midmark M7 Autoclave
At the end of the cycle, a buzzer will sound and the power to the sterilizer will be shut off. The user will then press the valve lever down in order for the sterilizer to be depressurized.
7" dia x 14" deep (19.1cm dia x 38.1cm deep)
2.4 gal. usable volume (9.0 liters)
Two large - 12"L x 5.62" x .88"D (30.5 x 14.3 x 2.2 cm)
One small - 12:L x 4.12W x .88"D (30.5 x 10.5 x 2.2 cm)
Water reservoir capacity:
0.75gal (2.8 liters)
120 V, 60 Hz, 10 amps.