Seller assumes all responsibility for this listing.
Type: Bi-level PAP
Model: DS960HS Bipap AutoSV Advance
MPN: DS960HS AutoSV
The BiPAP autoSV Advanced System One device is intended to augment your breathing by supplying pressurized air through a circuit. It senses the your breathing effort by monitoring airflow in the circuit and adjusts its output to assist in inhalation and exhalation. This therapy is known as Bi-level ventilation. Bi-level ventilation provides a higher pressure, known as IPAP (Inspiratory Positive Airway Pressure), when you inhale, and a lower pressure, known as EPAP (Expiratory Positive Airway Pressure), when you exhale. The higher pressure makes it easier for you to inhale, and the lower pressure makes it easier for you to exhale.
When prescribed, the device can also provide features to help make your therapy more comfortable. The ramp function allows you to lower the pressure when trying to fall asleep. The air pressure will gradually increase until the prescription pressure is reached. Additionally, the Bi-Flex comfort feature provides increased pressure relief during the expiratory phase of breathing.
Available Therapy Features
If prescribed for you, the device provides the following therapy features.
Bi-Flex Comfort Feature
If enabled, the device provides a comfort feature called Bi-Flex. The Bi-Flex attribute adjusts therapy by inserting a small amount of pressure relief during the latter stages of inspiration and during active exhalation (the beginning part of exhalation). Bi-Flex levels of 1, 2, or 3 progressively reflect increased pressure relief that will take place at the end of inspiration and at the beginning of expiration.
Ramp If enabled, the device is equipped with a linear ramp function. The Ramp feature will reduce the pressure and then gradually increase (ramp) the pressure to the prescription pressure setting so patients can fall asleep more comfortably.
Rise Time Comfort Feature
If enabled, the device provides a comfort feature called Rise Time. Rise time is the amount of time it takes the device to change from the expiratory pressure setting to the inspiratory pressure setting. Rise time levels of 0, 1, 2, or 3 progressively reflect slowed response of the pressure increase that will take place at the beginning of inspiration. A setting of 0 is the fastest rise time while a setting of 3 is the slowest. Providers should adjust the rise time to find the most comfortable setting for the patient. Rise time cannot be adjusted when Bi-Flex is enabled.
MODES: CPAP - Fixed pressure, APAP - Auto
Pressure Range: 4 - 20 cm H2O
Ramp Time : 0 to 45 min. with 5-min. increments
Starting Ramp Pressure: 4 to therapy pressure; user adjustable
Dimensions: 7 x 5.5 x 4 in
Machine Weight: 3 lbs
Machine with Humidifier weight: 4.8 lbs
Filters: Pollen (Foam) and optional ultra-fine (Disposable)
Set-up: On Screen Display and Control Dial/Knob
Data SD Card Records daily details w/flow waveforms
Data on the device Compliance, AHI, Leak, Pressure 7-Day and 30-Day averages, up to 6 months
Pressure Relief on Exhale: System One Resistance Control
Altitude Compensation: Automatic
Electrical Requirements: 100 - 240 VAC, 50/60 Hz (An adapter may be needed to plug the CPAP into a wall outlet outside the US.) 12 volt DC
Batteries: Yes - Optional Universal Portable Battery Pack (1028869), Lithium Ion Battery by Medili Technology (MD-1150), Super 12 VDC CPAP Battery Pack by Battery Power Solutions (BPSC-100-1)
Humidification: Integrated Heated Humidifier
Language Display: U.S. models display English or Spanish
DC Power: DC-12