For Sale MIDMARK 630 ENT Chair

Here’s a detailed overview of the Midmark 630 HUMANFORM® Procedure Chair — its key benefits and specifications — which should help you evaluate whether it’s a good fit for your clinic, medical office, or specialized setting (e.g., ENT, dermatology, procedure room).

✅ Key Benefits
Improved patient access & comfort

The chair offers a very low seat height (down to about 19″ in non-rotating models) which aids in barrier-free entry, making transfers easier for patients who are elderly, mobility-challenged or simply prefer not to climb.
Midmark
+2
Midmark
+2

It features a high weight capacity (650 lb) which supports a broad patient population and enhances safety and inclusivity.
Midmark
+2
Med-Stat Medical
+2

The “Premium Comfort System” uses contoured upholstery and adjustable footrest, which means patients are more comfortable and better supported during longer procedures.
Midmark
+1

The design deliberately aims for “more human-like” movement via their Motion Profiling® technology, which helps keep patient head/back support consistent as the chair shifts. That improves both patient comfort and clinician convenience.
Midmark

Enhanced clinician workflow & flexibility

The chair has power adjustment in multiple axes: height, back, foot rest, tilt—giving clinicians flexibility to position patients optimally for access and ergonomics.
Midmark
+1

Built-in safety feature: Active Sensing Technology (AST) which detects potential obstructions and pauses motion, helping protect patient and provider.
Midmark
+1

Optional features such as programmable positions (store & recall) and rotation (350°) allow time savings, more efficient workflows, and better room utilization. For example, rotating the chair rather than moving equipment around.
Midmark
+1

The expansive movement range (height from low to high, back from flat to upright/tilt) means it works not just for standard exams but for many outpatient procedures (e.g., ENT, dermatology, minor surgery) where patient positioning is critical.

Long-term investment and versatility

Because of its broad capabilities and high capacity, the Midmark 630 is a future-proof piece of equipment. If your practice expands into more procedure-oriented care (rather than just basic exams), this chair is well suited.

The barrier-free design helps meet accessibility expectations and potentially regulatory/ADA concerns. The ability to lower to a low height helps with wheelchair transfers or assisted transfers, improving patient satisfaction.

The optional wide upholstery widths (28″ or 32″) and myriad of accessory options (armboards, headrests, instrument trays) mean the chair can be tailored to specific specialties or upgrades.
HOSPEQ

📋 Key Specifications

Here are the major specs to know (approximate based on available sources):

Patient Weight Capacity: 650 lb (295 kg) for standard models.
Midmark
+1

Height (Seat/Chair) Range:

Standard (non-rotation): minimum ~ 19″ (48 cm), maximum ~ 40″ (101.6 cm).
MFI Medical
+2
Midmark
+2

With rotation (optional): minimum ~ 21.5″ (54.6 cm), maximum ~ 43.5″ (110.5 cm).
MFI Medical
+1

Patient Support Surface Length (flat position): ~ 72″ to 76″ (182.9 to 193 cm).
Midmark
+1

Electrical Specifications:

Standard models: 115/230 VAC, 12/6 A, 50/60 Hz.
Midmark
+1

Rotation models: 115/230 VAC, 9/4.5 A, 50/60 Hz.
HOSPEQ

Upholstery Width Options: 28″ or 32″.
HOSPEQ
+1

Standard Inclusions: paper-roll holder, stirrups, wired hand & foot controls.
HOSPEQ
+1

Optional Features: wireless hand/foot controls, programmability (store up to four positions), rotation, auxiliary power outlets, headrests/armboards, knee crutches etc.
Midmark
+1

📝 Considerations / Things to Check

Because this is a high-spec chair, the cost will be significantly above a basic exam table or chair. For budget-sensitive practices, it may be more than needed if you’re only doing standard exams.

Ensure the room footprint and clearance can accommodate the full movements (tilt, height, rotation if used).

Confirm what accessories are included in the model you’re buying (e.g., wireless controls, rotation, specific upholstery, stirrups, instrument trays) — often these are optional and add cost.

Verify your facility’s electrical supply and code compliance, especially if you choose the rotation or 230 V variant.

While the low-height down to ~19″ helps accessibility, check if your specific facility or regulatory environment requires even lower (e.g., 17″) for optimal wheelchair transfer — though 19″ is already strong.

For very specialized uses (e.g., ENT with microscope arms, heavy equipment attachments, heavy patients above 650 lb) check whether the 650 lb capacity is sufficient, or whether you need a higher load capacity model.

🎯 Summary

In short: The Midmark 630 HUMANFORM Procedure Chair is a premium, highly-featured chair engineered for modern outpatient/procedure settings. If your practice is doing more than standard exams — such as ENT, dermatology, minor surgery, or you want excellent accessibility and workflow flexibility — this chair is very well suited. Its combination of barrier-free low height, high weight capacity, multi-axis powered positioning, and optional rotation/programmability makes it a long-term investment in versatile exam/procedure capability.

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.