For Sale FISHER & PAYKEL Airvo 2 Humidifier / Heater

MSRP 6299.95
ON SALE FOR $4699.95

Includes the following:
1 Airvo2 Unit
1 AirSpiral Heated Breathing Tube
1 Water chamber and adapter
1 Disinfection Kit
1 Oxygen inlet extension kit
1 Air filter (2-pack)
User Manual

NOTE: To Maintain Safety, We Are Not Accepting Returns During The Time Of Covid-19 Pandemic.

The Fisher and Paykel Airvo 2 is a humidifier with integrated flow generator that delivers high flow warmed humidified respiratory gases to spontaneously breathing patients through a variety of patient interfaces. The Airvo 2 has an adjustable flow from 2 - 60 L/min depending on the patient interface. The Airvo HFNC is suitable for hospitals and long-term care facilities.

FEATURES
• Dual spiral heated breathing tube with an integrated temperature sensor.
• Can be used with Optiflow nasal cannula interfaces as well as direct-connect tracheotomy and mask interfaces.
• Oxygen from a concentrator or cylinder can be added.
• Built-in ultrasonic analyzer requires no calibration, service, or replacement.
• Adjustable temperature and flow settings.
• Designed for simple setup, use, and cleaning.

SPECIFICATIONS
• Supply frequency: 50-60 Hz
• Supply voltage/current: 100-115 V 2.2 A (2.4 A max†); 220-240 V 1.8 A (2.0 A max)
• Sound pressure level: Alarms exceed 45dbA @ 1 m
• Auditory alarm pause: 115 seconds
• Expected service life: 5 years
• Serial port: The serial port is used for downloading product data, using F&P Infosmart software.
• Warm-up time: 10 minutes to 31 °C (88 °F), 30 minutes to 37 °C (98.6 °F) using a
• MR290 chamber with flow rate of 35 L/min and starting temperatur e 23 ± 2 °C (73 ± 3 °F)
• Target temperature settings: 37, 34, 31 °C

DIMENSIONS
• Height: 11.6” (29.5 cm)
• Width: 6.7” (17 cm)
• Depth: 6.9” (17.5 cm)
• Weight: 4.8 lbs (2.2 kg)

PERFORMANCE
Humidity performance
• >33 mg/L at 37 °C target
• >12 mg/L at 34 °C target
• >12 mg/L at 31 °C target
• Maximum temperature of delivered gas: 43 °C (109 °F) (in accordance with ISO 80601-2-74)
• Maximum surface temperature of applied parts: 44 °C (111 °F) (in accordance with ISO 80601-2-74)
• Flow range (default): 10-60 L/min
• Flow range (Junior Mode): 2-25 L/min
• Maximum oxygen input: 60 L/min
• Oxygen analyzer accuracy: < ± 4 % (within the range 25-95% O2)
• Operating conditions: 18-28 °C (64-82 °F), 30-70% RH

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.