Shimadzu LC-20AT Solvent Delivery Pump Unit 2
EACH UNIT CONTAINS WARRANTY STICKERS TO PREVENT PARTS FROM BEING SWAPPED.
WE WILL NOT ACCEPT ANY UNITS BACK IF ANY OF THE STICKERS ARE CUT OR DAMAGED.
WE APOLOGIZE ABOUT THIS MESSAGE BUT WE HAD AN OCCURRENCE WITH CUSTOMER ATTEMPTING TO REMOVE DEFECTIVE UNIT BACK AFTER SWAPPING PARTS.
This Shimadzu LC-20AT Solvent Delivery Pump is in good working order.
Please see the exact video and photos below.
Testing we performed:
The Shimadzu LC-20AT Solvent Delivery Pump passed all tests and was found to be fully functional:
Tested initial power: PASSED
Tested keypad: PASSED
Tested flow rate min/max: PASSED
Tested pressure sensor system: PASSED
Tested leak detection system: PASSED
Tested constant delivery pressure: PASSED
The performance testing performed on this Shimadzu LC-20AT Solvent Delivery Pump verifies that it is operating as designed. Knowing
this you can purchase with confidence that this pump is ready to go.
System consists of:
Shimadzu Prominence LC-20AT Solvent Delivery Pump
Standard power cord.
Configuration and Setup:
Maximum Discharge Pressure: 40 MPa
Flow Rate Range: 0.001 - 5 mL/min (1.0 - 40 MPa) 5.001 - 10 mL/min (1.0 - 20 MPa)
Flow Rate Accuracy: no more than 2% or 2uL/min., whichever is greater (0.01 to 5 mL/min.)
Typical Pulsation: 0.3 MPa (for water at 1.0 mL/min. and 7MPa)
From the tag we pan on to get a full view of the Shimadzu LC-20AT Solvent Delivery Pump.
Camera pans around exterior of pump, all sides are shown including serial tags and connections on the rear of the unit.
We return to the front and the doors are opened so pump heads and valves can be detailed.
The doors are closed and the pump is started. I pan over so then the flow can be seen exiting the pump.
The total op time is seen and the pump is stopped. we take one last look at the front of the system, before returning to the item tag, after which, the video ends.
Items are sold as-is with no returns or refunds available unless explicitly stated.