Local Operation: Front panel controls and display status of all functions.
Remote Operation: Control of 4 of 7 functions via TTL or Relay contacts.
DX LAN Operation: All functions controlled by PeakNet Software on a PC connected to the ED40 via the DX LAN interface (optional).
Conductivity Cell
Cell Body: PEEK
Active Volume: 1.0 Μl
Maximum Pressure: 2.0 mPa (300 psi)
Electrodes: 316 stainless steel
Amperometry Cell
Cell Body: Titanium (counterelectrode)
Active volume: ~ 0.2 μL
Maximum Pressure: 0.7 mPa (100 psi)
Working Electrodes: Gold, Silver, Platinum, Glassy Carbon
Reference Electrode: Combination pH–Ag/AgCl
SRS Power Supply
Supply Current: 50, 100, 300, 500 mA @ 1.5 to 7.5 V
Over-Voltage Alarm: 8.5 V
Over-Temperature Alarm: 40 °C
DS3 Detection Stabilizer
Operating Temperature: 25 °C to 40 °C (50 °F to 104 °F)
Warm-up Time: 10 minutes (typical)
Under- or Over-Temperature Alarms: Message displayed when not at set temperature displayed when not at set temperature
Good condition.
Recently de-installed from a working lab.
Please note: I have been unable to carry out any extensive tests as I do not have the software but it was working prior to de-installation from the laboratory. The system can be tested prior to the sale. Contact for more information.
Collection from London welcome.
Free delivery within the UK.
Can ship worldwide. Bank/Wire transfer accepted.