The Allied Healthcare AHP300 Transport Ventilator is an electrically controlled, portable ventilator, designed to provide emergency respiratory support by means of a face mask or tube inserted into the patient's airway. It allows for invasive and non-invasive respiratory support with a variety of ventilation modes to choose from.
Note: Oxygen source is not included.
Warranty: 1 Year - Free from Manufacturing Defects (Unit and Battery).
The AHP300 Transport Ventilator is intended for use in EMS (emergency medical services) environments, inter-hospital transport, and hospital facilities, by qualified critical care nurses, paramedics, and respiratory therapists.
Allied Healthcare AHP300 Transport Ventilator Features
- Modes:
- (Pressure or Volume) A/CMV.
- (Pressure or Volume) SIMV.
- CPAP.
- Bi-Level Support (PS+CPAP) (can be programmed in custom mode).
- NIV (non-invasive ventilation) available in all modes.
- Five Programmable Quick Start Presets.
- Monitored Parameters: Paw (Peak, Base), Delivered Tidal Volume, Spontaneous Breath Count, Integrated Battery Level, External Battery Level (when attached).
- Calculated Parameters: I:E Ratio, Flow rate, and FiO2.
- Quick Start Ventilation: The AHP300 features programmable presets, allowing trained caregivers to rapidly recall up to five saved ventilation protocols.
- Long Battery Life: Up to 7.5 hours on internal battery, with auxiliary battery capability for up to 21 hours of battery life.
- Oxygen Conserve Mode: Allows the use of low pressure sources (oxygen concentrator, liquid oxygen, etc.) to extend the available amount of oxygen.
- Multi-Environment Capability: For everyday transport or evacuation from extreme environments. The AHP300 features rugged shock and vibration resistance as well as IPX22 water resistance.
- Low Cost of Ownership: Simple preventive maintenance schedule along with low-cost battery and repair parts result in significant saving and lower cost of ownership than competitor's broad-featured ventilators.
Allied Healthcare AHP300 Transport Ventilator Specifications
- Patient Range: Infant/Pediatric (5 kg / 11 lb and up) to Adult.
- Controls/Settings:
- Tidal Volume: 40 to 2000 ml.
- RR (Respiratory Rate): 0 or 5 to 60 b/min.
- I Time (Inspiratory Time): 0.5 to 2.0 seconds.
- PEEP/CPAP: 0 to 25 cmH2O / 0 to 25 mbar.
- Flow: 5 to 60 L/min (flows > 80 LPM in PS Mode, CPAP and demand flows).
- Pressure Control (Target Pressure): 15 to 55 cmH2O / 15 to 55 mbar.
- Ptrig (Sensitivity): -5 to -2 cmH2O / -5 to -1 mbar.
- Manual Inflation: 2 second maximum.
- FiO2: 0.21 to 1.00.
- Maximum I Time: 2 seconds.
- Flow Wave Pattern: Square or descending (depending on mode selected).
- Auto Lock Function: ON / OFF.
- Remote Alarm Option: Normally Open/Closed.
- Alarms:
- High Airway Pressure: 10 to 55 cmH2O / 10 to 55 mbar.
- Low Airway Pressure: 5 to 15 cmH2O / 5 to 15 mbar.
- Back-Up Ventilation Alert: 20 seconds fixed, apnea ventilation mode.
- Low Source O2: Triggers at 40 to 37 psi.
- Low Source Air: Triggers at 40 to 37 psi.
- Device Alert: Malfunction alert.
- Critical Battery: Approximately 20 minutes of battery charge remains.
- Silence/Reset: 110 seconds.
- Pneumatics:
- Gas Delivery System: Internal dual diaphragm.
- Air/Oxygen Mixer: Integrated.
- Oxygen Input: 41 to 87 psig oxygen.
- Power Requirements:
- AC Voltage: 110 to 240 VAC, 50/60 Hz, max. 1 A.
- DC Voltage: 11 to 15 VDC, max. 5 A.
- Integrated Battery Parameters:
- Battery Composition: Sealed Lead Acid.
- Run Time:
- 100% O2: 7.5 hours.
- 60% O2: 7.5 hours.
- 100% Air (on compressor): 7 hours.
- Dimensions: 13.3" (W) x 5.3" (D) x 13.8" (H) (34 cm x 13 cm x 35 cm).
- Weight: 18.8 lb (8.5 kg).
- Signal Connections:
- Remote Alarm: 1/4" phone jack to connect to nurse call or remote system.
- Environmental:
- Shock: 100 G-Force.
- Vibration: To IEC 60068-2-6.
- Operating Temperature: 0 to 122 °F (-18 to 50 °C).
- Storage Temperature: -40 to 140 °F (-40 to 60 °C).
- Operating Humidity: 5 to 95% (non-condensing).
- Water Ingress: IPx22.
- Shipping Dimensions: 21" x 19" x 11".
- Shipping Weight: 27.1 lb.
Allied Healthcare AHP300 Transport Ventilator Colors
- #AHP300: White Casing.
- #AHP300-Y: Yellow Casing.
AccessoriesAllied Healthcare AHP300 Transport Ventilator Accessories
The following accessory items and consumables are recommended as most compatible with the AHP300 Transport Ventilator. They are sold separately.
- #31-21-3271: Mechanical Test Lung.
- Single Limb Patient Ventilator Circuit:
- #L599-600: Adult (10/Case).
- #L599-650: Pediatric (20/Case).
- #64020: Bacterial Exhalation Filter (50/Case).
- Disposable Cuffed Mask:
- #L595161-10: Adult (10 per Bag).
- #L595162-10: Child (10 per Bag).
- #890113: Disposable Mask Restraint (12/Case).
Return Policy
30 Day Return Policy. Free Return. Return Policy: https://help.mfimedical.com/en-US/return-policy-204649
