the gantry control panel no ligh up, the movements are blocked, in the MCU board showme after a few seconds INIT ACTIVE then swowme HALT,
In the logbook : MAS_E000011 initdone timeout
MASME_TIMER_EXPIRED Master
control timer
MASME_ABORTED funcion abortada
COMPONENT Gantry sta
PART
FUNCTION Master Control Unit
BOARD D333
SIGNAL CommPos/Neg
DETAILED DESCRIPTION
---------------------
The MCU waits a few seconds to get the command ID (Init Done) from all
controller after power up. The missing controller is specified with the
last two parameter bytes in the brackets of the error message (...7 fd).
Example: MAS_E000011 ('E' 0 0 11 48 78 7 fd)
--------
for more info sarmad_hana11@yahoo.com
HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com
Gustavo Cornejo
siemens somaton 4 expert error
October 06, 2009 09:32
I need helpme
i have a CT somaton 4 expert i have error (MAS 000011 INITDONE timeout),also need service key password
to rate and post a comment
Aydogan Polat
Re: siemens somaton 4 expert error
October 06, 2009 10:58
send me more information about the error.
What is written in the logbook?
to rate and post a comment
Gustavo Cornejo
Re: siemens somaton 4 expert error
October 06, 2009 01:17
the gantry control panel no ligh up, the movements are blocked, in the MCU board showme after a few seconds INIT ACTIVE then swowme HALT,
In the logbook : MAS_E000011 initdone timeout
MASME_TIMER_EXPIRED Master
control timer
MASME_ABORTED funcion abortada
to rate and post a comment
sarmad hana
Re: siemens somaton 4 expert error
November 20, 2009 12:22
MAS_E000011 initdone timeou (%s) MAS_E000011_S
CODE 0011
===================
CONTROLLER MCU
PRIORITY 0
SHORTMESSG initdone timeou
COMPONENT Gantry sta
PART
FUNCTION Master Control Unit
BOARD D333
SIGNAL CommPos/Neg
DETAILED DESCRIPTION
---------------------
The MCU waits a few seconds to get the command ID (Init Done) from all
controller after power up. The missing controller is specified with the
last two parameter bytes in the brackets of the error message (...7 fd).
Example: MAS_E000011 ('E' 0 0 11 48 78 7 fd)
--------
for more info sarmad_hana11@yahoo.com
to rate and post a comment