Aurora, Illinois - If your GE system starts to report "Jitter Trigger" errors, it is likely caused by a defective axial encoder. To confirm if the axial encoder is defective, first check the C pulse LED on the gantry. Rotate the encoder one time around, which should signal the LED to light up once. If the LED does not light up, this may signal an issue with the encoder or LED sensor.

Our team is available 24 x 7 to assist you with anything you may need. For clarification on this troubleshooting tip, contact our technical support team at technicalsupport@dunlee.com or 800-238-3780.

To stay informed on the latest technical and product information, sign up for Dunlee updates or follow Dunlee on Facebook..

More Dunlee Tips