dismiss

Save the Date - Our next Clean Sweep Live Auction will be on Tuesday, September 26th at 9:30AM EST

DOTmed Home MRI Oncology Ultrasound Molecular Imaging X-Ray Cardiology Health IT Business Affairs
News Home Parts & Service Operating Room CT Women's Health Proton Therapy Endoscopy HTMs Mobile Imaging
SEARCH
Current Location:
>
> This Story


Log in or Register to rate this News Story
Forward Printable StoryPrint Comment

 

Infection Control Homepage

Gene-editing technology may cure deadly diseases Assessing the game-changing potential of CRISPR

Global medical device reprocessing market to surpass $1.8 billion by 2022 Cardiology is the largest segment

Training and empowerment are the keys to providing quality care Understanding strategies for reducing the rate of HAIs

Taking the bite out of rabies In 1885 Louis Pasteur successfully tested his rabies vaccine

CMS considers making hospital inspection outcomes public Agencies are not uncovering as many violations as government inspectors are finding

Better design needed for reusable devices, experts say Addressing challenges of reprocessing and reducing HAIs at MD&M East in NYC

Infection Control Corner: Bacteria hits the floor Floors are an under-appreciated source of pathogen dissemination

Five new products and innovations to reduce the danger of infections The focus on HAIs is having a clear impact on the medical marketplace

Medicare failed to investigate suspicious infection cases from 96 hospitals Getting to the bottom of HAI accountability

Minimizing infections when reprocessing endoscopy equipment Health care facilities must maintain patient safety

Four-step test can assess resistance of medical plastics to disinfectants

From the September 2017 issue of DOTmed HealthCare Business News magazine
Hospitals and health care facility administrators face ever-mounting pressures to reduce rates of hospital-acquired infections (HAIs), not only for enhancing patient safety, but also to ensure proper reimbursements.

In recent years, facilities have been incorporating new cleaning protocols using aggressive disinfectants with broad-spectrum efficacy to kill pathogens such as C. difficile. These protocols include the use of bleach and other chemical disinfectants. The use of such disinfectants to reduce HAIs makes sense, as it ultimately enhances the safety and well-being of vulnerable patients, staff, and visitors to these facilities.
Story Continues Below Advertisement

qualiTEE - reliabiliTEE - repairabiliTEE - we guaranTEE

Bayer HealthCare Multi Vendor Service will repair your transducer with the same precision and care you provide to your patients. Now offering TotalREPAIR on 140 transducer models! Call us at 1-844-5100 or visit www.mvs.bayer.com to set up an order today.


Yubiao Liu, Ph.D.

However, one challenge from some disinfectants is the effect on medical equipment surfaces. At issue is that common plastics used for equipment housings can break down after repeated exposure to disinfectants. This means that the surfaces of typical equipment found in health care settings — from ultrasound probes, buttons, and handles to portable patient monitors — can crack, craze or become discolored after repeated exposure. When surfaces craze or crack, disinfectants can penetrate the housing and damage sensitive electronics, requiring equipment repair and premature replacement. Equipment that is designed to last eight to 10 years is suddenly failing early in the life cycle, leading to unanticipated cost overruns.

Beyond issues of equipment failure when medical equipment appears discolored or has a sticky surface as a result of chemical residue, it may give off the impression of being old and worn out. While the equipment may still function properly, clinicians and patients alike may question its effectiveness and safety. This is also causing concern among facility managers as it reflects poorly on a health care facility’s overall brand and may lower cleanliness scores.

Therefore, balancing the efficacy of a disinfectant with surface compatibility of medical equipment is becoming increasingly important. Health care personnel are often aware of the effects some disinfectants have with equipment surfaces, and this puts them in a difficult dilemma when choosing certain disinfectants and avoiding others. A facility may, for example, “trade down” from a sporicidal disinfectant to a gentler product, such as a quaternary ammonium. While this may be more forgiving for certain equipment, it could potentially leave facility patients, staff and visitors vulnerable to dangerous pathogens like C. difficile spores.

Danielle Augustin-Glenn, Ph.D.
For biomedical engineers and designers of devices and equipment, surface compatibility with disinfectant protocols has not been top of mind. The industry would benefit from greater awareness of the issues involved in reducing HAIs. Some suppliers are helping manufacturers address issues of surface compatibility proactively. Clorox Healthcare, for example, is working with medical equipment manufacturers through its Clorox Healthcare Compatible program to evaluate and test compatibility of its products on common surfaces and equipment in health care settings.

One of the biggest challenges for device manufacturers is that there is no industry standard for surface compatibility. Health care workers have always been more concerned with efficacy, which has resulted in a gap in education about surface compatibility issues. Manufacturers each conduct their own ad hoc testing methods for the materials they select for device housings.

Testing protocol offers potential standard
In an effort to establish a replicable testing protocol, Eastman introduced a four-step test earlier this year that can help manufacturers test plastic materials for impact resistance. The test factors the element of stress in determining chemical resistance. Stress accelerates the effect of a chemical attack, and chemical exposure accelerates the reduction of impact strength. Therefore, the test has proven to be effective at mimicking the effects from exposure to the aggressive, broad-spectrum disinfectants commonly used today.

  Pages: 1 - 2 >>

Infection Control Homepage


You Must Be Logged In To Post A Comment

Advertise
Increase Your
Brand Awareness
Auctions + Private Sales
Get The
Best Price
Buy Equipment/Parts
Find The
Lowest Price
Daily News
Read The
Latest News
Directory
Browse All
DOTmed Users
Ethics on DOTmed
View Our
Ethics Program
Gold Parts Vendor Program
Receive PH
Requests
Gold Service Dealer Program
Receive RFP/PS
Requests
Healthcare Providers
See all
HCP Tools
Jobs/Training
Find/Fill
A Job
Parts Hunter +EasyPay
Get Parts
Quotes
Recently Certified
View Recently
Certified Users
Recently Rated
View Recently
Certified Users
Rental Central
Rent Equipment
For Less
Sell Equipment/Parts
Get The
Most Money
Service Technicians Forum
Find Help
And Advice
Simple RFP
Get Equipment
Quotes
Virtual Trade Show
Find Service
For Equipment
Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2017 DOTmed.com, Inc.
ALL RIGHTS RESERVED